Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

E3D Revo Hemera upgrade kit | 12V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Description The E3D Revo Hemera 12V upgrade kit contains all the parts you need to upgrade your Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design that is compatible with a Revo HeaterCore and Revo Nozzles. This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo Heater Core
1 x Revo HeaterCore Spring
1 x Extension Cable Set
1 x set of Revo nozzles 0.25mm/0.4mm/0.6mm/0.8mm

Specifications

Brand:	E3D	Our item no:	DED00314
Filament diameter:	1.75 mm	Voltage:	12 v
Max temp:	300 °C

€137.00 (Incl. 23% VAT)
(€111.38 Excl. 23% VAT)

EU warehouse

E3D Revo Hemera upgrade kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

Zoom in

Description The E3D Revo Hemera 24V upgrade kit contains all the parts you need to upgrade your Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design that is compatible with a Revo HeaterCore and Revo Nozzles. This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo Heater Core
1 x Revo HeaterCore Spring
1 x Extension Cable Set
1 x set of Revo nozzles 0.25mm/0.4mm/0.6mm/0.8mm

Specifications

Brand:	E3D	Our item no:	DED00315
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€137.00 (Incl. 23% VAT)
(€111.38 Excl. 23% VAT)

EU warehouse

E3D Revo Micro screw mount kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 12V Revo Micro is a lot smaller and lighter than average, with the smallest heatsink E3D has designed yet. This hot end weighs only 30g, so you can get more speed out of your printer. The Revo Micro can be used for both Bowden and Direct drive printers.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Note: The Revo Micro fan must be connected using a 5V regulator unless it connects directly to a 5V pin.

Specifications

Brand:	E3D	Our item no:	DED00316
Filament diameter:	1.75 mm	Screwthread type:	M12
Max temp:	300 °C	Voltage:	12 v
Nozzle diameter:	0.4 mm

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

EU warehouse

E3D Revo Micro screw mount kit | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 24V Revo Micro is a lot smaller and lighter than average, with the smallest heatsink E3D has designed yet. This hot end weighs only 30g, so you can get more speed out of your printer. The Revo Micro can be used for both Bowden and Direct drive printers.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Note: The Revo Micro fan must be connected using a 5V regulator unless it connects directly to a 5V pin.

Specifications

Brand:	E3D	Our item no:	DED00317
Filament diameter:	1.75 mm	Screwthread type:	M12
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.4 mm

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

EU warehouse

E3D Revo Six kit for V6 set-ups | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 12V Revo Six kit 0.4mm is a direct replacement for your E3D V6 hot end. This allows you to easily get all the benefits of E3D's RapidChange Revo ecosystem in one package. This model has the same height and diameter as the E3D V6 setup, allowing it to attach directly to your existing installation. All you need to do is plug in the Revo HeaterCore.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Specifications

Brand:	E3D	Our item no:	DED00318
Filament diameter:	1.75 mm	Voltage:	12 v
Nozzle diameter:	0.4 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€101.00 (coming soon) (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

E3D Revo Six kit for V6 set-ups | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description The 24 volt Revo Six kit 0.4mm is a direct replacement for your E3D V6 hot end. This allows you to easily get all the benefits of E3D's RapidChange Revo ecosystem in one package. This model has the same height and diameter as the E3D V6 setup, allowing it to attach directly to your existing installation. All you need to do is plug in the Revo HeaterCore.

The E3D Rapidchange Revo nozzles are easy to change at room temperature, without using extra tools.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Diameter:	13 mm	Our item no:	DED00319
Filament diameter:	1.75 mm	Voltage:	24 v

Order now, we can ship this today!

€101.00 (Incl. 23% VAT)
(€82.11 Excl. 23% VAT)

in stock

E3D Revo Hemera upgrade kit | 12V | 1.75mm (0.4mm nozzle)

Zoom in

Description The E3D Revo Hemera 12V upgrade kit contains all the parts you need to upgrade your existing Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design, which is compatible with a Revo HeaterCore and Revo Nozzles.

This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo HeaterCore
1 x Revo HeaterCore spring
1 x Extension cable set
1 x Revo nozzle 0.40mm

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00320
Max temp:	300 °C	Voltage:	12 v

€79.00 (Incl. 23% VAT)
(€64.23 Excl. 23% VAT)

EU warehouse

E3D Revo Hemera upgrade kit | 24V | 1.75mm (0.4mm nozzle)

Zoom in

Description The E3D Revo Hemera 24V upgrade kit contains all the parts you need to upgrade your existing Hemera with the power of RapidChanging. This kit includes a Hemera heatsink with a custom design, which is compatible with a Revo HeaterCore and Revo Nozzles.

This upgrade kit is easy to install: swap out your old Hemera heatsink and attach the Revo HeaterCore.

This kit includes the following:

1 x Revo Hemera sink
1 x Revo HeaterCore
1 x Revo HeaterCore spring
1 x Extension cable set
1 x Revo nozzle 0.40mm

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00321
Max temp:	300 °C	Voltage:	24 v

€79.00 (Incl. 23% VAT)
(€64.23 Excl. 23% VAT)

EU warehouse

E3D Revo brass nozzle kit | 1.75mm | 0.40mm (3-pack)

Zoom in

Description This E3D brass nozzle set contains 3 Revo nozzles with a diameter of 0.4mm in red. They are suitable for 1.75mm filament and the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Material:	Brass
Colour:	red	Nozzle diameter:	0.4 mm
Diameter:	13 mm	Our item no:	DED00322
Filament diameter:	1.75 mm	Quantity:	3 Quantity
Length:	41 mm

€68.00 (Incl. 23% VAT)
(€55.28 Excl. 23% VAT)

EU warehouse

E3D Revo brass nozzle kit | 1.75mm| 0.25/0.60/0.80mm (3-pack)

Zoom in

Description With this E3D Revo nozzle pack you'll receive 3 Revo nozzles, with the diameters 0.25mm (yellow), 0.6mm (blue) and 0.8mm (green).

These brass nozzles for 1.75mm filament are suitable for the E3D RapidChange Revo system. With this system you can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Material:	Brass
Diameter:	13 mm	Our item no:	DED00323
Filament diameter:	1.75 mm	Quantity:	3
Length:	41 mm

€68.00 (Incl. 23% VAT)
(€55.28 Excl. 23% VAT)

EU warehouse

E3D Revo brass nozzle 1.75mm, 0.25mm

Zoom in

Description With this E3D brass nozzle with a diameter of 0.25mm (yellow) for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	yellow	Nozzle diameter:	0.25 mm
Diameter:	13 mm	Our item no:	DED00324
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.40mm

Zoom in

Description With this red E3D brass nozzle with a diameter of 0.4mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change it without using additional tools.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	red	Nozzle diameter:	0.4 mm
Diameter:	13 mm	Our item no:	DED00325
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.60mm

Zoom in

Description With this blue E3D brass nozzle with a diameter of 0.6mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	blue	Nozzle diameter:	0.6 mm
Diameter:	13 mm	Our item no:	DED00326
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo brass nozzle 1.75mm, 0.80mm

Zoom in

Description With this green E3D brass nozzle with a diameter of 0.8mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	green	Nozzle diameter:	0.8 mm
Diameter:	13 mm	Our item no:	DED00327
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this today!

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

in stock

E3D Revo silicone sock kit (10-pack, 2 per size)

Zoom in

Description Keep your E3D Revo hot end insulated with these silicone socks. By using the sock you can keep the heater block clean and free of melted pieces of plastic.

It also reduces heat loss and improves print quality, especially when using a cooling fan.

Specifications

Brand:	E3D	Our item no:	DED00328
Material:	Silicone	Quantity:	10

Order now, we can ship this today!

€6.75 (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

in stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

E3D

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

E3D