Creality

169 - 192 of 382

Creality 3D CR-M4 Y-axis synchronous belt

Description This y-axis belt is an original replacement part for Creality. The belt is 1.157 metres, has assembled ends and is suitable for the CR-M4 3D printer from Creality.

Specifications

Belt size:	6 mm	Length:	1,157 mm
Belt Type:	GT2	Our item no:	DAR01592
Brand:	Creality 3D

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE X-axis timing belt

Zoom in

Description This X-axis belt is an original replacement part from Creality. The belt is made for linear movements on the x-axis and has finished ends. This product is suitable for the CR-10 SE 3D printers from Creality 3D.

Specifications

Brand:

Creality 3D

Our item no:

DAR01594

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE Y-axis timing belt

Zoom in

Description This Y-axis belt is an original replacement part from Creality. The belt is made for linear movements on the Y-axis and has finished ends. This product is suitable for the CR-10 SE 3D printers from Creality 3D.

Specifications

Brand:

Creality 3D

Our item no:

DAR01595

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE heatbed kit

Zoom in

Description This heatbed kit is an original replacement part from Creality. You can use the plate as a replacement or as an additional heatbed, so you can quickly continue with your next 3D print. This heated print bed works with 24V and 270W. The kit contains a printed circuit board of 235mm x 235mm x 3mm and is suitable for the CR-10 SE 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Thickness:	3 mm
Length:	235 mm	Voltage:	24 v
Power rating:	270 W	Width:	235 mm
Our item no:	DAR01596

€28.50

€23.17 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE Mainboard

Zoom in

Description This 32 bit Mainboard is an original replacement part from Creality. The mainboard is suitable for the CR-10 SE 3D printer from Creality 3D.

Specifications

Brand:

Creality 3D

Our item no:

DAR01597

€44.50

€36.18 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE Extruder

Zoom in

Description This extruder kit is an original replacement part from Creality. The kit is made from aluminum alloy ADC12 and comes with two screws. This product is suitable for the CR-10 SE 3D printer from Creality 3D.

Specifications

Brand:

Creality 3D

Our item no:

DAR01598

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE 42-26 stepper motor

Zoom in

Description This 42-26 stepper motor is an original replacement part from Creality. This product is suitable for the CR-10 Smart Pro, CR-M4 and the CR-10 SE.

Specifications

Brand:	Creality 3D	Our item no:	DAR01599
Current rating:	0.84 A	Stepping angle:	1.8

€11.50

€9.35 Excl. 23% VAT

EU warehouse

Creality 3D CR-10 SE spring steel platform kit, 235mm x 235mm

Zoom in

Description This spring steel building plate is an original replacement part from Creality. You can use this as a replacement for your current build plate or as an extra plate, so you can quickly continue making your next 3D print. The platform is made of metal and has a PEI coating. This product is 235mm x 235mm and is suitable for the CR-10 SE 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Our item no:	DAR01600
Length:	235 mm	Width:	235 mm
Material:	PEI

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Creality 3D CR-200B Pro Heater Block

Zoom in

Description This CR-200B Pro heatblock is an original replacement part from Creality. It is made of AL6063 and is 20mm x 16mm x 10mm. This product is suitable for Creality's Sermoon V2 and CR-200B Pro 3D printers.

Specifications

Brand:	Creality 3D	Our item no:	DAR01601
Dimensions:	10 x 20 x 16 mm

€1.50

€1.22 Excl. 23% VAT

EU warehouse

Creality 3D Nebula Camera

Zoom in

Description Keep an eye on your 3D prints around the clock with this Nebula camera from Creality. This high definition UBS camera even has a night vision function, allowing you to view your print at any time. This way you can always keep an eye on your printing process, wherever you are.

Useful functions
The camera has a spaghetti detection function, which can prevent wasting filament. When a problem is detected, the system will notify you and pause the print. In addition, the printer is equipped with a manual focus lens. By turning the lens you can create high definition images.

Other functionalities
Thanks to the USB port you can connect the camera to your 3D printer. The camera is compatible with the Creality Sonic Pad, Creality Nebula Pad, Ender-3 V3 KE, CR-10 SE, HALOT-MAGE Pro and Creality's Ender-3 V3 3D printers. You can place the Nebula camera on a tripod or flat on the surface, after which you can manually change the camera angle in both the horizontal and vertical directions.

Specifications

Brand:	Creality 3D	Voltage:	5 v
Dimensions:	35 x 55 x 40 mm	Weight:	0.13 kg
Our item no:	DAR01617

€45.50

€36.99 Excl. 23% VAT

EU warehouse

Creality 3D Nebula Smart Kit

Zoom in

Description Upgrade your 3D printer with this Nebula Smart Kit from Creality. The combination of the pad and camera ensures faster and better performance and a higher chance of a successful print. Monitor your 3D printing process from a distance to always be sure that your print is still going well.

Nebula path
You can use the pad independently and easily connect it to the internet. The powerful performance improves print quality. The 4.3-inch touchscreen and the dual-core CPU work with the Creality OS. The advanced motion function ensures the optimal filament feeding speed, effectively reducing bulges. Thanks to this pad you can control your 3D printer at any time and from anywhere.

Nebula camera
The camera allows you to view and record your print in real-time from a distance, in the light and in the dark. This makes it possible to make timelapse videos of your 3D printing process. The camera also has spaghetti detection, which prevents wasting filament. When a problem is detected, the system will notify you and pause the print. Finally, the camera is equipped with a manual focus lens for creating high definition images.

Compatibility
You can easily install the Nebula pad and camera and connect it to your 3D printer. The pad is compatible with most popular 3D printers. The AI LiDAR and camera can be used immediately by connecting to the Nebula pad via the USB port. This kit is compatible with the Ender-3 (32 bit motherboard), Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo and the Ender-3 V3 SE 3D printers from Creality.

Other functions
This kit supports LAN printing and can be set to 10 languages, namely English, German, Italian, French, Spanish, Portuguese, Russian, Turkish, Chinese and Japanese. The Nebula pad has a filament shortage detection, which means you will receive a notification if it detects that there is too little filament. The pad can also remember printing progress when there is a power outage. This way you can easily switch the print back on when the power returns.

Specifications

Brand:	Creality 3D	Voltage:	5 v
Standard WiFi connection:	802.11 b/g/n	Weight:	0.28 kg
Our item no:	DAR01618

€116.00

€94.31 Excl. 23% VAT

EU warehouse

Creality 3D turntable for 3D scanners

Zoom in

Description The Creality 3D turntable for 3D scanners is a handy tool that allows you to scan easily and quickly. The turntable can be rotated 360°.

Specifications

Brand:	Creality 3D	Our item no:	DAR01720
Dimensions:	14 x 203 x 203 mm	Weight:	0.2 kg

€15.50

€12.60 Excl. 23% VAT

EU warehouse

Creality 3D end stop

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10mini and CR-10s series

Specifications

Brand:

Creality 3D

Our item no:

DEL00008

Order now, we can ship this tomorrow!

€5.25

€4.27 Excl. 23% VAT

In stock

Creality 3D CR-10S Pro service kit

Zoom in

Description This complete service kit is suitable for the CR-10S Pro. Of course it can also be used for DIY 3D printers. The hotend is suitable for 1.75mm filament. The operating voltage of the heating element is 24V.

The kit contains the following parts:

2 x Nozzle
1 x Heater cartridge
1 x Thermistor
2 x V-lock wheel
2 x Endstop
1 x 2 metre timing belt

Specifications

Brand:	Creality 3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DHO00003

€19.75

€16.06 Excl. 23% VAT

EU warehouse

Creality 3D CR-10S service kit

Zoom in

Description This complete service kit is suitable for the CR-10S Pro. Of course it can also be used for DIY 3D printers. The hot end is suitable for 1.75mm filament. The working voltage of the heating element is 12V.

The kit contains the following parts:

2 x manual
1 x pliers
1 x hot end kit
1 x PTFE tube 65.5cm
2 x end plug
2 x v-slot
1 x cole clip M10
1 x cole clip M6
2 x cotton sticker
4 x molex connector
16 x molex pins
1x belt 102.5cm/6mm

Specifications

Brand:

Creality 3D

Our item no:

DHO00005

€41.50

€33.74 Excl. 23% VAT

EU warehouse

Creality 3D CR-10S 5 service Kit

Zoom in

Description This complete service kit is suitable for the CR-10 S5. Of course it can also be used for DIY 3D printers. The hot end is suitable for 1.75mm filament. The working voltage of the heating element is 12V.

The kit contains the following parts:

1 x PTFE (Teflon) tube 64cm.
1 x pointed nose pliers.
1 x Hotend kit complete.
4 x Connectors.
2 x Colet clips (M6 & M10).
1 x M6 Pneufit.
2 x V-slot wheel.
2 x Endstop.
1 x 139cm timing belt.

Specifications

Brand:	Creality 3D	Voltage:	12 v
Our item no:	DHO00007

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Creality 3D CR-20 (Pro) service kit

Zoom in

Description This complete service kit is suitable for the CR-20 (Pro). Of course it can also be used for DIY 3D printers. The operating voltage of the heating element is 24V.

The kit contains the following parts:

1 x heater cartridge 24 volts 40 watts.
1 x thermistor.
2 x endstop.
2 x v-slot wheel.
1 x 205cm timing belt.
2 x nozzles.

Specifications

Brand:

Creality 3D

Our item no:

DHO00009

€19.75

€16.06 Excl. 23% VAT

EU warehouse

Creality 3D CR-200B Pro 3D printer

Zoom in

Description The Creality 3D CR-200B Pro is a 3D printer with a print volume of 200mm x 200mm x 200mm and a fully enclosed housing. Thanks to this housing, your prints are less affected by external factors and you can print more accurately. The parts are resistant to high temperatures, making it possible to work with many different materials, including ABS. The 3D printer is delivered almost fully assembled: within a few minutes you have placed the few loose parts and you can adjust the settings to your preference.

The Creality 3D CR-200B Pro distinguishes itself with the simplicity of installation and assembly, the 'Sprite' Direct Extruder with which very precise and constant filament is fed, the PC Spring steel print bed and the CR-Touch process with which the print bed automatically calibrates. In addition, you can easily print with the CR-200B Pro thanks to Cloud Printing.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	50.3 x 41.1 x 43.5 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	20 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	8.8
Printer extruder:	direct	Max print width:	20 cm
Extruder max temp:	260 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00158
Filament sensor:	yes	Weight:	16.5 kg

€493.00

€400.81 Excl. 23% VAT

EU warehouse

Creality 3D K1 Max 3D printer ⭐ Our choice for a fast and large printer

Zoom in

Description The Creality 3D K1 Max is an FDM 3D printer that is distinguished by its high printing speed and large build volume. The printer has a CoreXY structure and a lightweight print head that can reach speeds of up to 600 mm/s. The printer also has many smart features that simplify and improve the printing process. It has an AI LiDAR scanner that automatically scans the first layer and detects any errors. It also has an AI camera that monitors the print status and alerts you to any problems, such as spaghetti errors or foreign objects. It also has an RTC (real-time clock) that records the time accurately, even when the printer is turned off.

In addition, the K1 Max uses the smart Creality OS, which has a simple UI and synchronizes data and commands with PC, phone, cloud and add-on modules. The Creality 3D K1 Max is a versatile and powerful FDM 3D printer suitable for various projects and applications. It has a build volume of 300 x 300 x 300 mm, which is ideal for prototyping and design verification.

You can use the following filaments on the K1 Max:

PLA
ABS
PETG
TPU
PA
PC

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Manual:	Download	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	52.6 x 43.5 x 46.2 cm	Heatbed max temp:	120 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Nozzle type:	-	Max print volume:	27
Power rating:	1,000 W	Max print width:	30 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00164
Camera included:	yes	Weight:	18 kg
Has CNC option:	no

€699.00

(coming soon)

€568.29 Excl. 23% VAT

Creality 3D Halot Mage Pro CL-103 3D printer

Zoom in

Description The Creality Halot Mage Pro CL-103 is a super fast resin 3D printer that prints no less than 170mm per hour. This printer is equipped with a professional 10.3'' 8K LCD screen and has a construction volume of 228mm x 128mm x 230mm³. The new, smart resin pump automatically controls the supply and discharge of resin. The printer can be filled or emptied within half an hour, so you no longer have to do this manually. The Halot Mage Pro CL-103 has a smart air purifier with a replaceable carbon filter, which reduces the unpleasant smell of printing with resin.

Print anywhere quickly and easily by controlling the printer remotely with the Creality Cloud app (available on IOS and Android). In addition, it is possible to control the printer from the computer or a USB stick and you can connect a USB camera so that you can monitor your print remotely. The Halot Mage Pro CL-103 uses the self-developed Halot OS, which has a clear UI and synchronizes data with your computer, telephone and Creality Cloud. The powerful CPU ensures that you can easily print at a high speed. The evenness of the light ensures consistent quality no matter where on the build plate printing takes place. The light intensity and the speed at which the layers are cured ensure a smooth finish and sharp contours.

Specifications

Brand:	Creality 3D	Filament sensor:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	work ethernet WiFi	Max print depth:	12.8 cm
Dimensions:	60.8 x 33.3 x 27 cm	Max print height:	23 cm
Input voltage:	100-240V	Max print volume:	6.712
Light source:	UV LCD	Max print width:	22.8 cm
Power rating:	150 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00166
Camera included:	no	Weight:	13 kg
Has CNC option:	no

€493.00

€400.81 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 v3 SE 3D printer ⭐ Our choice for a budget plug & play printer

Creality 3D Ender-3 v3 SE 3D printer DKI00192

Zoom in

Description Open up a world of infinite creative possibilities with the Ender-3 V3 SE printer from Creality. Within 20 minutes you have assembled the printer and it is ready for use. With the easy auto bed-levelling system you can always start printing quickly. The CR Touch sensor easily levels the build plate and the tension sensor provides an automatic z-offset. The Ender-3 V3 SE is perfect for making all kinds of prints: from home accessories to gadgets, this printer can do it all and has a maximum print speed of 250mm per second.

The reliable 'Sprite' extruder of the Ender-3 V3 SE can handle many different materials, such as PLA, PETG and the flexible TPU. The filament is automatically loaded and unloaded for even more ease of use. With the 'extrude' function, the filament will flow smoothly from the nozzle. The 'retract' function will quickly retract the filament, after which you can remove and replace it effortlessly. Thanks to the sturdy double z-axis, the printer wobbles less. The 8mm thick y-axis shafts are designed to guide the build plate smoothly and last for a long time. Together these ensure that every print is printed perfectly. The printer is particularly easy to operate by means of the 3.2 inch colour display, which can be operated with the rotary knob. The UI uses motion graphics to display the leveling process, among other things. This way you can see at a glance what the printer is doing and what the progress is. Finally, the Ender-3 V3 SE has a stylish and compact design, making it perfect for any interior.

Specifications

Brand:	Creality 3D	Filament sensor:	no
Manual:	Download	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	490 x 364 x 364 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	12.1
Power rating:	350 W	Max print width:	22 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00192
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	7.12 kg