Buy 3D printers, filament, parts & tools | lowest prices

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock €19.95

Super Lube

€8.25

Modifi3D repair/modification tool

€34.75

Hot end copper cleaning brush

€3.95

Home
Our brands
Creality

289 - 297 of 297

Creality 3D fan axial 24V, 40mm x 40mm x 10mm

Zoom in

Description This Creality 3D fan axial is a replacement fan for the original fan. It is compatible with Creality 3D printers. It has a voltage of 24V and the measurements 40mm x 40mm x 10mm.

Specifications

Brand:	Creality 3D	Power rating:	2,400 mw
Fan type:	axial	Our item no:	DRW00040
Dimensions:	10 x 40 x 40 mm	Voltage VDC:	24 v

Order now, we can ship this today!

€5.50 (Incl. 23% VAT)
(€4.47 Excl. 23% VAT)

in stock

Creality 3D CR-X display board

Zoom in

Description With this Creality 3D CR-X display board you can replace the LCD screen of your printer effortlessly.

Specifications

Brand:

Creality 3D

Our item no:

DRW00042

€43.50 (Incl. 23% VAT)
(€35.37 Excl. 23% VAT)

EU warehouse

Creality 3D CR-10S Pro / CR-X Touchscreen board

Zoom in

Description Original Touchscreen for Creality CR-10S Pro and CR-X 3D Printers.

Specifications

Brand:

Creality 3D

Our item no:

DRW00044

€55.50 (Incl. 23% VAT)
(€45.12 Excl. 23% VAT)

EU warehouse

Creality 3D Silent Mainboard v4.2.7

Zoom in

Description With this motherboard you can easily upgrade your Creality 3D printer. You only replace the motherboard within a few minutes, after which you can immediately start working with your improved 3D printer!

This upgrade improves the following performance:

The motherboard with TMC2225 driver makes your printer run a lot quieter
+50% printing precision
-40% power consumption

Other characteristics:

MCU 32 bit
Easy installation of your Antclabs BLTouch Leveling Sensor
Bootloader installed (ISP/USB Arduino)
Firmware 4.2.7 is preinstalled on this board
The board is pre-installed for the Ender-3, but also suitable for the Ender-3 V2, Ender-3 Pro and Ender 5.

CAUTION: Always install the latest firmware for your printer.

Specifications

Brand:	Creality 3D	Our item no:	DRW00068
On-board stepper drivers:	4

Order now, we can ship this today!

€67.50 (Incl. 23% VAT)
(€54.88 Excl. 23% VAT)

in stock

Creality 3D Cordless Rotary Tool Kit

Zoom in

Description This cordless rotary tool kit is perfect for finishing all your projects. With this machine you can easily sand, polish, drill and cut. Thanks to the 6 different settings you can determine how fast the tool rotates. The RPM range runs from 10000 - 18000 RPM, so there is a perfect setting for every project. Because the tool can be locked, you can easily and safely change accessories. The chuck can have accessories with a diameter between 1.8 - 3.2 mm and there is a wide choice of accessories that ensure endless possibilities. A fully charged battery (1500 mAh) lasts up to 60 minutes, depending on the setting you use. This tool is compact, lightweight and has a non-slip design. In addition, the tool comes with a handy storage box with 24 accessories.

Replacing the accessories
Replacing accessories is very easy. You can simply follow the following steps:

Press the 'lock' button to lock it. This prevents the tool from suddenly turning during the replacement. After this you can loosen the nut.
Select the accessory you want to use and place it in the tool.
Retighten the nut and press the 'lock' button to use the tool again.

Specifications

Brand:

Creality 3D

Our item no:

DAR01915

€48.50 (Incl. 23% VAT)
(€39.43 Excl. 23% VAT)

EU warehouse

Creality Hi Combo 3D printer

Zoom in

Description Create the most colourful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colours simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed levelling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralises vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	47.7 x 40.9 x 39.2 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer bed levelling:	automatic	Max print volume:	20.28
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00323
Filament sensor:	yes	Weight:	13.31 kg

Order now, we can ship this today!

€489.50 (Incl. 23% VAT)
(€397.97 Excl. 23% VAT)

in stock

Creality Hi 3D Printer

Zoom in

Description Make the most beautiful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. This printer is expandable with a CFS, allowing you to print up to 4 colours simultaneously.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, allowing you to quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has an all-metal design that is cast from aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors if the filament is broken or empty.

Multi material system upgrade
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	47.7 x 40.9 x 39.2 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer bed levelling:	automatic	Max print volume:	20.28
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00332
Filament sensor:	yes	Weight:	13.31 kg

€349.50 (Incl. 23% VAT)
(€284.15 Excl. 23% VAT)

EU warehouse

Creality 3D K2 Plus Combo 3D Printer

Zoom in

Description Create amazing, multi-coloured 3D prints with the K2 Plus Combo 3D printer from Creality. This printer has a build volume of no less than 350mm x 350mm x 350mm, allowing you to easily create large 3D prints. The maximum print speed is up to 600mm/s with an acceleration of 30,000mm/s². Thanks to the active print chamber heating, the chamber is heated to 60˚C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch colour touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty, the automatic filament backup can load other filament and the filament tangle sensor gives a message when the filament is tangled.

Other functionalities
The K2 Plus Combo comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you do not suffer from toxic substances and unpleasant odours. You can send files via Ethernet, WiFi or with a USB stick. Print up to 4 colours or materials simultaneously or use the system for a backup spool of a colour or material that you use often.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	72.5 x 49.5 x 51.5 cm	Max print depth:	35 cm
Input voltage:	110-220V	Max print height:	35 cm
Nozzle diameter:	0.4 mm	Max print volume:	42.875
Printer bed levelling:	automatic	Max print width:	35 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	350 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00283
Has CNC option:	no	Variant:	With CFS
Filament sensor:	yes	Weight:	38.5 kg
Heated bed included:	yes

€1,549.00 (Incl. 23% VAT)
(€1,259.35 Excl. 23% VAT)

EU warehouse

Creality 3D K2 Plus 3D printer

Zoom in

Description Create fantastic 3D prints with the K2 Plus 3D printer from Creality. This printer has a build volume of no less than 350mm x 350mm x 350mm, allowing you to easily create large 3D prints. The maximum print speed is up to 600mm/s with an acceleration of 30,000mm/s². Thanks to the active print chamber heating, the chamber is heated to 60˚C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed levelling and a 4.3 inch colour touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty and the filament tangle sensor gives a notification when the filament is tangled.

Other functionalities
The K2 Plus comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you don't have to worry about toxins and unpleasant odours. You can send files via Ethernet, WiFi or with a USB stick.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	72.5 x 49.5 x 51.5 cm	Max print depth:	35 cm
Input voltage:	110-220V	Max print height:	35 cm
Nozzle diameter:	0.4 mm	Max print volume:	42.875
Printer bed levelling:	automatic	Max print width:	35 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	350 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00331
Has CNC option:	no	Variant:	Without CFS
Filament sensor:	yes	Weight:	38.5 kg
Heated bed included:	yes

€1,349.50 (Incl. 23% VAT)
(€1,097.15 Excl. 23% VAT)

EU warehouse

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Creality

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Creality