Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

Creality 3D Sermon D1 Z-axis limit kit DRO00204

Description Original Creality 3D Z-Axis endstop for the Sermoon D1 3D printer. The endstop is equipped with 16cm cable.

Specifications

Brand:	Creality 3D	Our item no:	DRO00204
Cable length:	16 cm

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Creality 3D heating block kit - Standard for Sprite Extruder

Zoom in

Description Upgrade your 3D printer with this Heating Block Kit-Standard from Creality 3D. This has been specially developed for FDM printers that use a Sprite Extruder. The heating block is made of stainless steel and can print at a maximum temperature of 260°C. This kit is compatible with the Creality Ender-3 S1 and Ender-3 S1 Plus.

Specifications

Brand:	Creality 3D	Our item no:	DRO00211
Extruder max temp:	260 °C	Weight:	0.019 kg

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Pro) calls Y axis

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the Y axis of the Creality 3D Ender-3 S1 and S1 Pro printer.

Specifications

Brand:	Creality 3D	Weight:	0.007 kg
Our item no:	DRO00212

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Creality 3D K1 (Max) Silicone sock

Zoom in

Description Original Creality 3D silicone sock for the Creality K1 and K1 Max 3D printer.

Specifications

Brand:

Creality 3D

Our item no:

DRO00215

€9.50

€7.72 Excl. 23% VAT

EU warehouse

Creality 3D K1 Mainboard

Zoom in

Description This 32-bit mainboard for the Creality 3D K1 printer is equipped with silent TMC2209 stepper drivers.

Specifications

Brand:	Creality 3D	Our item no:	DRO00217
Chip:	TMC2209	Weight:	0.096 kg
On-board stepper drivers:	4

€149.50

€121.54 Excl. 23% VAT

EU warehouse

Creality 3D K1 Max Mainboard

Zoom in

Description This 32-bit mainboard for the Creality 3D K1 Max printer is equipped with silent TMC2209 stepper drivers.

Specifications

Brand:	Creality 3D	Our item no:	DRO00218
Chip:	TMC2209	Weight:	0.096 kg
On-board stepper drivers:	4

€109.50

€89.02 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 bonding platform sticker

Zoom in

Description With this Creality 3D adhesive platform sticker you can provide your current print surface with a new adhesive layer if the original print surface is damaged.

The sticker has a good 3M adhesive layer, so the sticker adheres very well to the heatbed of your Printer.

Also compatible with the Creality CR-20 3D Printer.

Specifications

Brand:	Creality 3D	Our item no:	DRW00035
Dimensions:	235 x 235 mm

€13.75

€11.18 Excl. 23% VAT

EU warehouse

Creality 3D fan axial 24V, 40mm x 40mm x 10mm

Zoom in

Description This Creality 3D fan axial is a replacement fan for the original fan. It is compatible with Creality 3D printers. It has a voltage of 24V and the measurements 40mm x 40mm x 10mm.

Specifications

Brand:	Creality 3D	Power rating:	2,400 mw
Fan type:	axial	Our item no:	DRW00040
Dimensions:	10 x 40 x 40 mm	Voltage VDC:	24 v

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Creality 3D CR-X display board

Zoom in

Description With this Creality 3D CR-X display board you can replace the LCD screen of your printer effortlessly.

Specifications

Brand:

Creality 3D

Our item no:

DRW00042

€43.50

€35.37 Excl. 23% VAT

EU warehouse

Creality 3D CR-10S Pro / CR-X Touchscreen board

Zoom in

Description Original Touchscreen for Creality CR-10S Pro and CR-X 3D Printers.

Specifications

Brand:

Creality 3D

Our item no:

DRW00044

€55.50

€45.12 Excl. 23% VAT

EU warehouse

Creality 3D Silent Mainboard v4.2.7

Zoom in

Description With this motherboard you can easily upgrade your Creality 3D printer. You only replace the motherboard within a few minutes, after which you can immediately start working with your improved 3D printer!

This upgrade improves the following performance:

The motherboard with TMC2225 driver makes your printer run a lot quieter
+50% printing precision
-40% power consumption

Other characteristics:

MCU 32 bit
Easy installation of your Antclabs BLTouch Leveling Sensor
Bootloader installed (ISP/USB Arduino)
Firmware 4.2.7 is preinstalled on this board
The board is pre-installed for the Ender-3, but also suitable for the Ender-3 V2, Ender-3 Pro and Ender 5.

CAUTION: Always install the latest firmware for your printer.

Specifications

Brand:	Creality 3D	Our item no:	DRW00068
On-board stepper drivers:	4

Order now, we can ship this today!

€67.50

€54.88 Excl. 23% VAT

In stock

Creality 3D Cordless Rotary Tool Kit

Zoom in

1
0

Description This cordless rotary tool kit is perfect for finishing all your projects. With this machine you can easily sand, polish, drill and cut. Thanks to the 6 different settings you can determine how fast the tool rotates. The RPM range runs from 10000 - 18000 RPM, so there is a perfect setting for every project. Because the tool can be locked, you can easily and safely change accessories. The chuck can have accessories with a diameter between 1.8 - 3.2 mm and there is a wide choice of accessories that ensure endless possibilities. A fully charged battery (1500 mAh) lasts up to 60 minutes, depending on the setting you use. This tool is compact, lightweight and has a non-slip design. In addition, the tool comes with a handy storage box with 24 accessories.

Replacing the accessories
Replacing accessories is very easy. You can simply follow the following steps:

Press the 'lock' button to lock it. This prevents the tool from suddenly turning during the replacement. After this you can loosen the nut.
Select the accessory you want to use and place it in the tool.
Retighten the nut and press the 'lock' button to use the tool again.

Specifications

Brand:

Creality 3D

Our item no:

DAR01915

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Creality Hi Combo 3D printer

Zoom in

Description Create the most colourful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colours simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed levelling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralises vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	47.7 x 40.9 x 39.2 cm	Max print depth:	26 cm
Input voltage:	110-220V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	20.28
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00323
Has CNC option:	no	Variant:	With CFS
Filament sensor:	yes	Weight:	11.31 kg
Heated bed included:	yes

Order now, we can ship this today!

€399.00

€324.39 Excl. 23% VAT

€489.00 Creality3D rrp

In stock

Creality Hi 3D Printer

Zoom in

1
0

Description Make the most beautiful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. This printer is expandable with a CFS, allowing you to print up to 4 colours simultaneously.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, allowing you to quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has an all-metal design that is cast from aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors if the filament is broken or empty.

Multi material system upgrade
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	47.7 x 40.9 x 39.2 cm	Max print depth:	26 cm
Input voltage:	110-220V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	20.28
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00332
Has CNC option:	no	Variant:	Without CFS
Filament sensor:	yes	Weight:	8.75 kg
Heated bed included:	yes

€299.00

€243.09 Excl. 23% VAT

€329.00 Creality3D rrp

EU warehouse

Creality 3D Falcon A1 Laser Engraver Rotary Kit Pro

Zoom in

Description Upgrade your Falcon A1 laser with the Creality Rotary Kit Pro, a ready-to-use kit that easily brings cylindrical objects like mugs, bottles, and thermoses to life. The kit includes adjustable chucks and risers for stable and secure placement.

Specifications

Brand:	Creality 3D	Our item no:	DAR02133
Dimensions:	100 x 360 x 122 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€149.50 (coming soon)

€121.54 Excl. 23% VAT

Creality 3D Space Pi X4 Filament Dryer

Zoom in

2
1
0

Description The Creality SpacePi X4 is an advanced filament dryer with a capacity of four spools, designed for demanding users such as print farms, multi-colour projects, and professional applications. With two independent heating chambers, each equipped with a 200W PTC heater, this dryer offers optimal control and efficiency when drying various filament types.

Key Features:

Capacity: 4 filament spools
Temperature range: up to 85°C
Timer function: up to 48 hours

Specifications

Brand:	Creality 3D	Our item no:	DAR02134
Dimensions:	270 x 382 x 290 mm	Weight:	5 kg
Power rating:	360 W

€185.50

€150.81 Excl. 23% VAT

EU warehouse

Creality 3D Ender-5 Max 3D printer

Zoom in

1
0

Description The Creality Ender-5 Max is a powerful CoreXY 3D printer with an impressive build volume of 400mm x 400mm x 400mm. With a print speed of up to 700mm/s and a robust, all-metal frame, this printer is ideal for both large projects and batch production. The automatic 64-point bed levelling and direct extruder ensure consistent, high-quality prints, even for complex models.

Key Features:

Huge build volume of 400mm x 400mm x 400mm for large or multiple prints simultaneously
Ultra-fast print speed up to 700mm/s with acceleration up to 20,000mm/s²
Supports various filaments such as PLA, PETG, TPU, ABS, ASA and more

NOTE: The printer is shipped on a pallet.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	85 x 64.9 x 72.1 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	40 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Power rating:	1,250 W	Max print volume:	64
Printer bed levelling:	automatic	Max print width:	40 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00350
Has CNC option:	no	Weight:	25.9 kg
Filament sensor:	yes

€789.50

€641.87 Excl. 23% VAT

EU warehouse

Creality 3D K1 Max Active Carbon Air Filter

Zoom in

3
2
1
0

Description The Creality 3D K1 Max active carbon air filter is ideal for filtering air while printing. This filter measures 101mm x 101mm x 15mm and is compatible with the Creality 3D K1 Max 3D printer.

Specifications

Brand:	Creality 3D	Our item no:	DAR01263
Colour:	black	Thickness:	15 mm
Dimensions:	101 x 101 mm

€9.95

€8.09 Excl. 23% VAT

EU warehouse

Creality 3D Ender 3 V3 X/Z Limit switch

Zoom in

3
2
1
0

Description The Creality Ender-3 V3 X/Z Limit Switch is an essential replacement part that ensures precise positioning of your 3D printer’s X and Z axes. This mechanical limit switch prevents the print head or bed from moving outside the allowable range, which is crucial for consistent and reliable print results. Specifically designed for the Ender-3 V3 and V3 Plus models, this switch offers easy installation and long-lasting performance.

Key Features:

High precision: Ensures precise homing and positioning of the X and Z axes.
Durable Design: Made of high-quality materials for long-lasting use.
Easy Installation: Plug-and-play design with 3-pin connector for quick replacement.

Specifications

Brand:

Creality 3D

Our item no:

DAR01560

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Creality 3D Fan for Ender-3 v3/v3 Plus/5 Max 24V radial ball bearing fan, 40mm x 40mm x 20mm

Zoom in

1
0

Description The Creality 3D Fan is a genuine Creality radial cooling fan, designed for optimal performance and compatibility with the Ender 3 v3, v3 Plus, and 5 Max 3D printers. Measuring 40mm x 40mm x 20mm and powered by a 24V power supply, this fan provides efficient cooling for consistent print results.

Specifications

Brand:	Creality 3D	Our item no:	DAR01561
Dimensions:	20 x 40 x 40 mm	Voltage:	24 v

€7.95

€6.46 Excl. 23% VAT

EU warehouse

Creality 3D CR-6 Max Ribbon Cable

Zoom in

Description This original ribbon cable is specifically designed for the Creality CR-6 Max 3D printer. The cable provides a stable connection between the motherboard and the hot end, preventing interference or signal loss. Ideal as a replacement in case of wear or damage.

Specifications

Brand:

Creality 3D

Our item no:

DAR01836

€13.50

€10.98 Excl. 23% VAT

EU warehouse

Creality 3D K2 Plus FPC cable

Zoom in

1
0

Description This FPC cable is a genuine Creality replacement part. It is only suitable for the Creality K2 Plus 3D printer.

Specifications

Brand:	Creality 3D	No of ways:	40
Cable length:	20 cm	Our item no:	DAR01937
Dimensions:	207 mm

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Creality 3D K2 Plus Heatbreak 24V axial fan, 30mm x 30mm x 10mm

Zoom in

4
3
2
1
0

Description This axial heatbreak fan is a genuine Creality replacement part. The fan measures 30mm x 30mm x 10mm and operates on 24 V. It is only suitable for the Creality K2 Plus 3D printer.

Specifications

Brand:	Creality 3D	Our item no:	DAR01939
Cable length:	8.5 cm	Voltage:	24 v
Current consumption:	0.1 A

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Creality K2 Plus Extruder Motor Cooling 5V Axial Fan, 25mm x 25mm x 7mm

Zoom in

3
2
1
0

Description This axial fan is a genuine Creality replacement part. The fan measures 25mm x 25mm x 7mm and operates on 5V. This product is only suitable for the Creality K2 Plus 3D printer.

Specifications

Brand:	Creality 3D	Dimensions:	7 x 25 x 25 mm
Cable length:	10 cm	Our item no:	DAR01940
Current consumption:	0.2 A	Voltage:	5 v

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Creality

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Creality