BIQU

Description BIQU's H2 extruder kit can reach a maximum temperature of 500°C. The kit has a 9000 RPM fan. The titanium and copper heatbreak provides better thermal insulation. The red copper nickel-plated heat block also provides excellent heat conduction. This extruder kit contains a 70W steel nozzle that heats up quickly.

Specifications

Brand:	BIQU	Max temp:	500 °C
Dimensions:	75 x 76 x 37.9 mm	Our item no:	DAR00703

€115.25

€93.70 Excl. 23% VAT

EU warehouse

BIQU H2 V2S REVO Extruder

Zoom in

Description Powerful extruder with easily exchangeable nozzles, with the BigTreeTech H2 V2S REVO Extruder you can change nozzles super fast! The extruder is compatible with E3D's Revo nozzles and has a dual-gear system that can feed powerful filament with a 7:1 transmission. Because the H2 V2S REVO is a direct-drive extruder, the reliable extrusion of flexible materials is also possible. You can mount the H2 V2S on various models of 3D printers, including the BiQu B1 / BX, Creality Ender-3, Voron 2.4 / V0 and Vzbot.

The H2 V2S REVO can print up to 300°C and the entire module including fan weighs only 198 grams. The 40W heating element heats up quickly and accepts 24 Volts, while the 104NT-4-R025H42G 100K thermistor accurately measures temperature. The thermistor is suitable for most 3D printer firmware and easy to set up.

Specifications

Brand:	BIQU	Power rating:	40 W
Filament diameter:	1.75 mm	Extruder max temp:	300 °C
Input voltage:	24V	Our item no:	DAR01022

€164.50

€133.74 Excl. 23% VAT

EU warehouse

BIQU Honeycomb and Houndstooth Designer build plate for Bambu Lab printers

Zoom in

Description Add a special effect to your 3D prints with this BIQU designer build plate for Bambu Lab X1/P1/A1 3D printers. This flexible plate is made of spring steel and has a special polymer coating for improved adhesion during printing. After printing, you can easily remove your 3D print by bending the plate. The plate is printed on both sides with a honeycomb pattern on one side and a pied-de-poule pattern on the other. This way you can choose the perfect pattern for your project.

Specifications

Brand:	BIQU	Our item no:	DAR01857
Dimensions:	257 x 257 mm

€23.50

€19.11 Excl. 23% VAT

EU warehouse

BIQU CryoGrip build plate for Bambu Lab

Zoom in

Description This BIQU CryoGrip buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specifically designed to print PLA at room temperature, preventing the extruder from overheating and preventing clogging. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the plate's adhesion, simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257mm x 257mm and is suitable for Bambu Lab's X1/P1/A1 3D printers. Please note: Frostbite is not suitable for ABS & TPU

Specifications

Brand:	BIQU	Our item no:	DAR01860
Dimensions:	257 x 257 mm

€32.50

€26.42 Excl. 23% VAT

EU warehouse

BIQU Orbiter V2.5 Extruder Dual Drive gear extrusion

Zoom in

Description This BIQU Orbiter V2.5 Extruder is a renewed design that uses an LDO motor. This extruder also uses dual drive wheels to extrude filaments accurately and smoothly. In addition, the motor is more compact and thanks to the 11mm drive wheels and weighs only 135 grams. The high-quality components ensure that the Orbiter V2.5 has a long lifespan. Because this extruder can be used for different types of filament, such as PLA, ABS, PETG and more, it is an excellent choice for 3D printing enthusiasts.

Specifications

Brand:	BIQU	Our item no:	DAR02072
Filament diameter:	1.75 mm	Weight:	0.135 kg

€70.50

€57.32 Excl. 23% VAT

EU warehouse

BIQU Panda Shelter

Zoom in

Description This Panda Shelter is a transparent dust and water resistant enclosure for the Bambu Lab A1 and A1 mini 3D printers from Bambu Lab. Thanks to this enclosure, the temperature remains constant during printing, which increases the quality and stability of prints. The enclosure is CPAI-84 certified for extra fire safety and keeps out toxic particles, dust and fumes, which ensures a cleaner working environment.

Handy
This enclosure is large enough for the A1 series of Bamboo Lab, with a size of 84cm x 58cm x 58cm. In addition, the 3D printer can be monitored during printing through the transparent sides. The handy tool compartments make it easy to keep important tools close to the printer. The built-in temperature and humidity meter shows the status of the environment inside the enclosure so that it can be adjusted if it is not to your liking. Use the mesh pockets on the inside to store desiccants or activated carbon. The Panda Shelter contains the following parts:

1 x protective cover
1 x Temperature and humidity meter
8 x Long Fiberglass Rods
16 x Short Fiberglass Rods
8 x right angle T-connections
12 x straight connections

Please note: for optimal functioning of the Panda Shelter it must be used in combination with the Ventilation Kit for the Panda Shelter.

Specifications

Brand:	BIQU	Our item no:	DAR02081
Dimensions:	580 x 580 x 840 mm

€97.50

€79.27 Excl. 23% VAT

EU warehouse

BIQU Ventilation Kit for Panda Shelter

Zoom in

Description This ventilation kit is meant to be used in combination with the Panda Shelter from BIQU. Together they ensure that the temperature remains the same for an improved quality of 3D prints. The housing is also fireproof and keeps out toxic substances and fumes, which ensures a safe working environment.

Specifications

Brand:

BIQU

Our item no:

DAR02082

€27.50

€22.36 Excl. 23% VAT

EU warehouse

BIQU CryoGrip Pro Glacier Buildplate, 184mm x 184mm Suitable for A1 Mini

BIQU CryoGrip Pro Glacier Buildplate, 184mm x 184mm DAR02083

Zoom in

Description This BIQU CryoGrip Pro Glacier buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments including ABS, TPU and PA at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can easily be removed by slightly bending the plate. The plate is 184mm x 184mm and is suitable for the A1 Mini 3D printer from Bambu Lab.

Please note: The Glacier build plate can be used for PLA and PETG, but excels with other materials.

Specifications

Brand:	BIQU	Our item no:	DAR02083
Dimensions:	184 x 184 mm	Variant:	A1 Mini

€16.95

€13.78 Excl. 23% VAT

EU warehouse

BIQU CryoGrip Pro Glacier Buildplate, 257mm x 257mm Suitable for X1 / P1 / A1

BIQU CryoGrip Pro Glacier Buildplate, 257mm x 257mm DAR02084

Zoom in

Description This BIQU CryoGrip Pro Glacier buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments including ABS, TPU and PA at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257mm x 257mm and is suitable for the X1/P1/A1 3D printer from Bambu Lab.

Please note: The Glacier buildplate can be used for PLA and PETG, but excels with other materials. If you plan on printing with PLA and/or PETG only, the Frostbite buildplate is also an excellent choice. It has a rougher texture and offers fantastic adhesion to PLA and PETG.

Specifications

Brand:	BIQU	Our item no:	DAR02084
Dimensions:	257 x 257 mm

€32.95

€26.79 Excl. 23% VAT

EU warehouse

BIQU CryoGrip Pro Glacier Buildplate, 250mm x 250mm Suitable for Kobra 3

BIQU CryoGrip Pro Glacier Buildplate, 250mm x 250mm DAR02085

Zoom in

Description This BIQU CryoGrip Pro Glacier buildplate for Anycubic uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments, including ABS, TPU and PA, at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50 W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can easily be removed by slightly bending the plate. The plate is 250mm x 250mm and is suitable for the Kobra 3 3D printer from Anycubic.

Please note: The Glacier build plate can be used for PLA and PETG, but excels with other materials.

Specifications

Brand:	BIQU	Our item no:	DAR02085
Dimensions:	250 x 250 mm	Variant:	Kobra 3

€32.95

€26.79 Excl. 23% VAT

EU warehouse

BIQU CryoGrip Pro Glacier Buildplate, 310mm x 315mm Suitable for K1 Max / Ender 3 V3 Plus

BIQU CryoGrip Pro Glacier Buildplate, 310mm x 315mm DAR02086

Zoom in

Description This BIQU CryoGrip Pro Glacier buildplate for Creality uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments, including ABS, TPU and PA, at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the plate's adhesion, simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 310mm x 315mm and is suitable for the K1 Max and the Ender 3 V3 Plus 3D printer from Creality.

Please note: The Glacier build plate can be used for PLA and PETG, but excels with other materials.

Specifications

Brand:	BIQU	Our item no:	DAR02086
Dimensions:	310 x 315 mm	Variant:	K1 Max / Ender 3 V3 Plus

€39.95

€32.48 Excl. 23% VAT

EU warehouse

BIQU CryoGrip Pro Glacier Buildplate, 235mm x 235mm Suitable for Adventurer 5M

BIQU CryoGrip Pro Glacier Buildplate, 235mm x 235mm DAR02087

Zoom in

Description This BIQU CryoGrip Pro Glacier buildplate for Flashforge uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments including ABS, TPU and PA at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can easily be removed by slightly bending the plate. The plate is 235mm x 235mm and is suitable for the Adventurer 5M 3D printer from Flashforge.

Please note: The Glacier build plate can be used for PLA and PETG, but excels with other materials.

Specifications

Brand:	BIQU	Our item no:	DAR02087
Dimensions:	235 x 235 mm	Variant:	Adventurer 5M / 5M Pro

Order now, we can ship this tomorrow!

€29.95

€24.35 Excl. 23% VAT

In stock

BIQU Panda Shelter with Ventilation Kit

Zoom in

Description The BIQU Panda Shelter with Ventilation Kit is a complete solution for Bambu Lab A1 and A1 Mini 3D printer users seeking optimal print quality and a safe working environment. This combination ensures a stable temperature during printing and effectively removes vapours and odours, resulting in consistent, high-quality prints.

Key Features:

Transparent, dust and water resistant housing
Active ventilation for constant temperature and air quality
Flame retardant material for extra safety

Specifications

Brand:	BIQU	Dimensions:	580 x 840 x 580 mm
Colour:	black	Our item no:	DAR02132

€99.50

€80.89 Excl. 23% VAT

EU warehouse

BIQU Ajax TD1S

Zoom in

Description The BIQU AJAX TD1S is an advanced filament sensor that measures the transmission distance (TD) and the exact colour code of your filament. Developed in collaboration with AJAX 3D and BIQU, this compact device offers accurate measurements and seamless integration with HueForge for realistic 3D prints.

Key Features:

Accurately measure the transmission distance (TD) and colour code of filament
Seamless integration with HueForge for photorealistic renderings
Standalone use possible thanks to OLED display and USB-C power supply

Specifications

Brand:	BIQU	Dimensions:	24.5 x 54.5 x 21.6 mm
Colour:	black	Our item no:	DAR02482
Filament diameter:	1.75 mm	USB version:

€98.50

€80.08 Excl. 23% VAT

EU warehouse

BIQU Panda Storage Rack for 3D filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50

(coming soon)

€51.63 Excl. 23% VAT

BIQU Panda Under Armor PX Aluminum Base Protective Strap Lightweight H2D/H2S Series

Zoom in

Description The BIQU Panda Under Armor PX (H2D/H2S variant) is a robust base plate made of AL6061-T6 aluminum that fully protects the bottom of your Bambu Lab H2D/H2S printer from dust, dirt, bumps, and wear. Thanks to its precise design, it fits seamlessly into the printer structure, and you can optionally add wheels for easy portability.

Specifications

Brand:	BIQU	Quantity:	1
Material:	Aluminum	Weight:	1.8 kg
Our item no:	DAR02688

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€119.00

(coming soon)

€96.75 Excl. 23% VAT

BIQU Panda Under Armor PX Aluminum Base Protective Strap Lightweight X1/P1 Series

Zoom in

Description The BIQU Panda Under Armor PX is a sturdy aluminum base plate for 3D printers from the Bambu Lab X1/P1 series. It offers full underside protection from dirt, dust, and bumps, while optional wheels make your printer easy to move without compromising stability or aesthetics.

Specifications

Brand:	BIQU	Quantity:	1
Material:	Aluminum	Weight:	1.8 kg
Our item no:	DAR02689

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€87.50

(coming soon)

€71.14 Excl. 23% VAT

BIQU Panda Status Customisable RGB for Print Progress and Error Alerts X1/P1/A1

Zoom in

Description The BIQU Panda Status is a smart RGB status indicator for your Bambu Lab X1 / P1 / A1 series 3D printer. It provides visual feedback during printing (progress, error messages, pause, etc.) through colour changes and animations fully customisable via Wi-Fi. Thanks to the magnetic mounting, no tools are required and the print bed continues to move freely.

Specifications

Brand:	BIQU	Our item no:	DAR02690
Cable length:	100 cm	Quantity:	1
Network:	WiFi	USB version:
Dimensions:	259 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€25.50

(coming soon)

€20.73 Excl. 23% VAT

BIQU Panda Diaper reusable, easy-clean waste pads for Bambu Lab X1/P1

Zoom in

Description The BIQU Panda Diaper Waste Pads are reusable waste mats that make cleaning your Bambu Lab X1 or P1 printer a lot easier. They catch residual material, filament drops, and dust during printing, keeping the inside of your printer cleaner for longer. The pads are washable, durable, and cover the entire bottom surface of your printer for maximum protection.

Specifications

Brand:	BIQU	Material:	Silicone
Colour:	black	Our item no:	DAR02691
Dimensions:	15.5 x 385 x 299 mm	Quantity:	1

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€22.50

(coming soon)

€18.29 Excl. 23% VAT

BIQU Panda Juicer SF-A Hotend High Flow & Standard Flow with 0.4mm hardened nozzle

Zoom in

Description The BIQU Panda Juicer SF-A Hotend is a high-quality, modular printhead that delivers top performance in both high-flow and standard-flow printing applications. With the included hardened 0.4mm nozzle, this hotend combines durability, high flow, and precision in a single, compact, plug-and-play solution. Ideal for users seeking maximum reliability and print quality.

Specifications

Brand:	BIQU	Max temp:	300 °C
Colour:	blue	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02692
Material:	Hardened Steel	Weight:	0.019 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€9.50

(coming soon)

€7.72 Excl. 23% VAT

BIQU Panda Juicer SF-H/A Hotend High Flow & Standard Flow with 0.4mm hardened nozzle

Zoom in

Description The BIQU Panda Juicer SF-H/A Hotend is a high-performance, modular print head designed for maximum performance in both high-flow and standard-flow applications. Featuring a hardened 0.4mm nozzle, this hotend offers excellent wear resistance, precise temperature control, and stable filament advance—ideal for those who want to combine speed and precision in a single solution.

Specifications

Brand:	BIQU	Max temp:	300 °C
Colour:	blue	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02693
Material:	Hardened Steel	Weight:	0.019 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.50

(coming soon)

€9.35 Excl. 23% VAT

BIQU Pyrogrip spring steel sheet double-side build plate, 346mm x 355mm

Zoom in

Description The BIQU Pyrogrip Build Plate is a high-quality, double-sided, flexible spring steel build plate designed for optimal adhesion and easy removal of prints. Thanks to its durable double-sided coating and magnetic base, this plate is perfect for long-term use with a wide variety of filaments.

Specifications

Brand:	BIQU	Dimensions:	355 x 346 mm
Colour:	gold	Our item no:	DAR02696

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50

(coming soon)

€21.54 Excl. 23% VAT

BIQU Panda Breeze Cross Flow Fan for Bambu Lab A1 Printers Plug & Play

Zoom in

Description Enhance the cooling performance of your Bamboo Lab A1 with the BIQU Panda Breeze Cross Flow Fan. This plug-and-play upgrade provides a wide, even airflow across the entire print surface. The result: sharper details, tighter overhangs, and improved print quality at high print speeds.

Specifications

Brand:

BIQU

Our item no:

DAR02697

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€101.50

(coming soon)

€82.52 Excl. 23% VAT

BIQU Multi Material Printing Enhancement Kit for Bambu Lab P1/X1 3D Printers

Zoom in

Description The BIQU Purging Reliability Improvement Upgrade for the Bambu Lab P1/X1 series is an upgrade to the purge system of your multi-colour or multi-material 3D printer. This upgrade reduces filament debris and blockages in the purge chute, resulting in smoother colour changes, increased print quality, and reduced downtime due to blockages.

Specifications