ABS

At 123-3D.ie you will find a selection of ABS filament, ranging in colour. You can find your desired filament by searching by diameters (1.75mm and 2.85mm) or type of ABS. Order your ABS filament from 123-3D.ie for fast delivery in Ireland.

123-3D dark blue ABS filament 1.75mm, 2.3kg

Zoom in

Description ABS from 123-3D.ie combines all the advantages of ABS with a high degree of user-friendliness. 3D printing with ABS is easier, because the filament adheres better and warps less when printing. In addition to being lightweight and durable, 3D-printed objects are also extra strong. This is due to the higher print temperature. The dark blue 1.75mm filament can be used on any 3D printer with heated bed.

This is a large spool of 2.3kg of filament.

Read more about printing with ABS filament here.

Specifications

Amount:	2.3 kg	Nozzle temp range:	220 - 260 °C
Brand:	123-3D	Our item no:	DFA11054
Colour:	dark blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	60 - 110 °C	Inner diameter:	Ø 5.1 cm
Length:	920 m	Outer diameter:	Ø 30.0 cm
Material:	ABS	Spool width:	10.5 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€49.50

€40.24 Excl. 23% VAT

In stock

123-3D red ABS filament 1.75mm, 2.3kg

Zoom in

Description ABS from 123-3D.ie combines all the advantages of ABS with a high degree of user-friendliness. 3D printing with ABS is easier, because the filament adheres better and warps less when printing. In addition to being lightweight and durable, 3D-printed objects are also extra strong. This is due to the higher print temperature. The red 1.75mm filament can be used on any 3D printer with heated bed.

This is a large coil of 2.3kg of filament.

Read more about printing with ABS filament here.

Specifications

Amount:	2.3 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	220 - 260 °C
Colour:	red	Our item no:	DFA11055
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	60 - 110 °C	Inner diameter:	Ø 5.1 cm
Length:	920 m	Outer diameter:	Ø 30.0 cm
Material:	ABS	Spool width:	10.5 cm

Colour:

dark blue

red

€49.50

€40.24 Excl. 23% VAT

In stock

BASF Ultrafuse orange ABS filament 1.75mm, 0.75kg

Zoom in

Description The orange BASF ABS filament (1.75mm) has a deep colour and is suitable for 3D printing of many different objects. With this versatile high quality ABS, you can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	BASF	Our item no:	DFB00019
Colour:	orange	RAL colour no:	2008
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

€28.50

€23.17 Excl. 23% VAT

In stock

eSun pine green ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's pine green ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20015
Colour:	pine green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

In stock

REAL blue ABS filament 1.75mm, 1kg

Zoom in

Description The blue REAL ABS filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	230 - 255 °C
Colour:	blue	Our item no:	DFA02004
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm

Colour:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL brown ABS filament 1,75mm, 1kg

Zoom in

Description The brown REAL ABS filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	230 - 255 °C
Colour:	brown	Our item no:	DFA02016
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL gold ABS filament 1.75mm, 1kg

Zoom in

Description The gold REAL ABS filament (1.75mm) has a rich colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 255 °C
Brand:	REAL	Our item no:	DFA02006
Colour:	gold	RAL colour no:	1036
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL nuclear green ABS filament 1.75mm, 1kg

Zoom in

Description The nuclear green REAL ABS filament (1.75mm) has a bright colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	230 - 255 °C
Colour:	nuclear green	Our item no:	DFA02015
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL orange ABS filament 1.75mm, 1kg

Zoom in

Description The orange REAL ABS filament (1.75mm) has a clear colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 255 °C
Brand:	REAL	Our item no:	DFA02010
Colour:	orange	RAL colour no:	2008
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL purple ABS filament 1.75mm, 1kg

Zoom in

Description The purple REAL ABS filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	230 - 255 °C
Colour:	purple	Our item no:	DFA02013
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL red ABS filament 1.75mm, 1kg

Zoom in

Description The red REAL ABS filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 255 °C
Brand:	REAL	Our item no:	DFA02003
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL red ABS Pro filament 1.75mm, 1kg

Zoom in

Description The red ABS Pro is a premium filament (1.75mm) with unparalleled results. With ABS Pro you can print objects that are lightweight, super strong and aesthetically optimised. 3D printing with ABS has never been easier: this filament has perfect layer adhesion, a much improved bed adhesion and the risk of warping and cracking is minimised.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFA02053
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	80 - 90 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS Pro	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

black

blue

red

€42.50

€34.55 Excl. 23% VAT

In stock

REAL pink ABS filament 1.75mm, 1kg

Zoom in

Description The pink REAL ABS filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	230 - 255 °C
Colour:	pink	Our item no:	DFA02012
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL white ABS filament 1.75mm, 1kg

Zoom in

Description The white REAL ABS filament (1.75mm) has a clear colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 255 °C
Brand:	REAL	Our item no:	DFA02002
Colour:	white	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL white PC-ABS filament 1,75mm, 1kg

Zoom in

Description The white PC-ABS (polycarbonate-ABS) (1.75mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	REAL	Our item no:	DFA02059
Colour:	white	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	95 - 105 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€67.50

€54.88 Excl. 23% VAT

In stock

REAL silver ABS filament 1.75mm, 1kg

Zoom in

Description The silver REAL ABS filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. The versatile ABS can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 255 °C
Brand:	REAL	Our item no:	DFA02007
Colour:	silver	RAL colour no:	9006
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

BASF Ultrafuse blue ABS filament 1.75mm, 0.75kg

Zoom in

Description The blue BASF ABS filament (1.75mm) has a deep colour and is suitable for 3D printing of many different objects. With this versatile high quality ABS, you can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	BASF	Our item no:	DFB00014
Colour:	blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

Filament diameter:

€29.50

€23.98 Excl. 23% VAT

In stock

BASF Ultrafuse black ABS filament 1.75mm, 0.75kg

Zoom in

Description The black BASF ABS filament (1.75mm) has a deep colour and is suitable for 3D printing of many different objects. With this versatile high quality ABS, you can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	BASF	Our item no:	DFB00022
Colour:	black	RAL colour no:	9005
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

€29.50

€23.98 Excl. 23% VAT

In stock

BASF Ultrafuse black ABS Fusion+ filament 1.75mm, 0.75kg

Zoom in

Description The black Ultrafuse ABS Fusion+ is a reliable filament with a diameter of 1.75mm. It contains Polyscope XILOYTM: a high quality material designed for 3D printing. ABS is a very strong plastic with which you can print hard and heat-resistant objects directly on glass. This filament offers you excellent print quality and is not prone to warping.

The ideal printing temperature is 240 to 260°C. A heated bed is required for printing with ABS. For best results, use a heated bed of 100 to 110°C.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Material:	ABS Fusion+
Brand:	BASF	Nozzle temp range:	240 - 260 °C
Colour:	black	Our item no:	DFB00034
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	110 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

In stock

REAL red ABS Plus filament 1.75mm, 1kg

Zoom in

Description The red REAL ABS Plus is a premium filament (1.75mm) that ensures beautiful results thanks to its transparent colour. 3D printing with ABS Plus is very easy and produces super strong objects. With ABS Plus you no longer suffer from warping and the unpleasant ABS smell is almost no longer present.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFA02043
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS Plus	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

In stock

REAL white ABS Plus filament 1.75mm, 1kg

Zoom in

Description The white REAL ABS Plus is a premium filament (1.75mm) that ensures beautiful results thanks to its transparent colour. 3D printing with ABS Plus is very easy and produces super strong objects. With ABS Plus you no longer suffer from warping and the unpleasant ABS smell is almost no longer present.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFA02045
Colour:	white	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	ABS Plus	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

red

white

€37.50

€30.49 Excl. 23% VAT

In stock

REAL black PC-ABS filament 1.75mm, 1 kg

Zoom in

Description The black PC-ABS (polycarbonate ABS 1.75mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	REAL	Our item no:	DFA02057
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	95 - 105 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€67.50

€54.88 Excl. 23% VAT

In stock

123-3D brown ABS filament 1.75mm, 1kg

Zoom in

Description 123-3D version 1.75mm ABS filament has minimal shrinkage and emits fewer irritants. In addition, this filament retains its shape down to a temperature of -40˚C and provides a shiny surface.

Key Features:

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00145
Colour:	brown	RAL colour no:	8016
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D dark grey ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00148
Colour:	dark grey	RAL colour no:
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D yellow ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00141
Colour:	yellow	Roundness:	>95%
Density:	1.05	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	110 °C	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D grey ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00142
Colour:	grey	RAL colour no:
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D green ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00143
Colour:	green	RAL colour no:
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D sky blue ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00144
Colour:	sky blue	RAL colour no:	5015
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D neutral ABS filament 1.75mm, 1kg

Zoom in

Description 123-3D own-brand ABS 1.75mm filament shrinks little and emits fewer irritants. In addition, this filament retains its shape down to a temperature of -40˚C and provides a shiny surface.

Key Features:

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00149
Colour:	neutral	Roundness:	>95%
Density:	1.05	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	110 °C	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D orange ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00146
Colour:	orange	Roundness:	>95%
Density:	1.05	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	110 °C	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D red ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00147
Colour:	red	Roundness:	>95%
Density:	1.05	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	110 °C	Outer diameter:	Ø 20.0 cm
Material:	ABS	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D white ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00140
Colour:	white	RAL colour no:	9016
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D black ABS filament 1.75mm, 1kg

Zoom in

High impact resistance and stiffness
Excellent adhesion between layers
Absorbs little water
Glossy surface

Applications: Ideal for making finished products, tools, industrial designs and items exposed to impact.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 260 °C
Brand:	123-3D	Our item no:	DHM00139
Colour:	black	RAL colour no:	9017
Density:	1.05	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	110 °C	Inner diameter:	Ø 5.2 cm
Material:	ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€22.50

€18.29 Excl. 23% VAT

In stock

123-3D white PC-ABS FR V0 filament 1.75mm, 1kg

Zoom in

Description 123-3D version 1.75mm PC-ABS FR V0 filament is a halogen-free filament. It meets the highest safety regulations, is self-extinguishing and creates durable, precise 3D prints. In addition, it has a glossy surface, which also makes it look good visually.

Key Features:

Flame retardant
Halogen free
Excellent adhesion between layers
Stable printing

Applications: Ideal for making functional parts, designs that require fire resistance, and enclosures that protect electronic circuits.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 270 °C
Brand:	123-3D	Our item no:	DHM00151
Colour:	white	Roundness:	>95%
Density:	1.17	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	95 - 110 °C	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS FR V0	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

black

white

€36.50

€29.67 Excl. 23% VAT

In stock

123-3D black PC-ABS FR V0 filament 1.75mm, 1kg

Zoom in

Flame retardant
Halogen free
Excellent adhesion between layers
Stable printing

Applications: Ideal for making functional parts, designs that require fire resistance, and enclosures that protect electronic circuits.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 270 °C
Brand:	123-3D	Our item no:	DHM00150
Colour:	black	Roundness:	>95%
Density:	1.17	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	95 - 110 °C	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS FR V0	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

black

white

€36.50

€29.67 Excl. 23% VAT

In stock

BASF Ultrafuse neutral white ABS filament 1.75mm, 0.75kg

Zoom in

Description The neutral white BASF ABS filament (1.75mm) has a deep colour and is suitable for 3D printing of many different objects. With this versatile high quality ABS, you can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Material:	ABS
Brand:	BASF	Nozzle temp range:	230 - 255 °C
Colour:	neutral white	Our item no:	DFB00018
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

€29.50

€23.98 Excl. 23% VAT

In stock

BASF Ultrafuse red ABS filament 1.75mm, 0.75kg

Zoom in

Description The red BASF ABS filament (1.75mm) has a deep colour and is suitable for 3D printing of many different objects. With this versatile high quality ABS, you can print objects in any shape. It is a hard and slightly flexible material, which is very strong and can withstand high temperatures. ABS is less suitable for 3D printing details or sharp edges. A heated bed is required for printing with ABS.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	BASF	Our item no:	DFB00020
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

€29.50

€23.98 Excl. 23% VAT

In stock

BASF Ultrafuse neutral white ABS Fusion+ filament 1.75mm, 0.75kg

Zoom in

Description The neutral white Ultrafuse ABS Fusion+ is a reliable filament with a diameter of 1.75mm. It contains Polyscope XILOYTM: a high quality material designed for 3D printing. ABS is a very strong plastic with which you can print hard and heat-resistant objects directly on glass. This filament offers you excellent print quality and is not prone to warping.

The ideal print temperature is 240 to 260°C. A heated bed is required for printing with ABS. For best results, use a heated bed of 100 to 110°C.

Read more about printing with ABS filament here.

Specifications

Amount:	0.75 kg	Material:	ABS Fusion+
Brand:	BASF	Nozzle temp range:	240 - 260 °C
Colour:	neutral white	Our item no:	DFB00033
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	110 °C	Spool width:	5.2 cm

Colour:

black

neutral white

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Bedrock 3D blue ABS filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS filament in blue is a strong, dimensionally stable filament with a vibrant colour and industrial quality. Ideal for functional parts where appearance is also important.

Key Features:

Print temperature: 230 – 255°C
Impact-resistant and heat-resistant up to approx. 96°C
Perfect for both technical and visual applications

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	Bedrock 3D	Our item no:	DFB00264
Colour:	blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.95

(coming soon)

€26.79 Excl. 23% VAT

Bedrock 3D black ABS filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS filament in black is a classic, high-performance filament for industrial applications and prototyping. Thanks to its consistent quality, it produces strong, heat-resistant prints with a sleek black finish.

Key Features:

Print temperature: 230 – 255°C
Heat resistant up to approx. 96°C
Ideal for technical, visual and industrial parts

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	Bedrock 3D	Our item no:	DFB00265
Colour:	black	RAL colour no:	9005
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Bedrock 3D grey ABS Fusion+ filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS Fusion+ in grey delivers stable, strong prints without warping, combined with a neutral grey tone. Its balanced properties allow you to produce precise parts with a professional look.

Key Features:

Print without warping, even on open printers
Bonds directly to glass or heated bed without additional adhesive.
Compatible with water-soluble supports

Specifications

Amount:	0.75 kg	Material:	ABS Fusion+
Brand:	Bedrock 3D	Nozzle temp range:	240 - 260 °C
Colour:	grey	Our item no:	DFB00269
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	110 °C	Spool width:	5.2 cm

Colour:

black

grey

neutral white

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€37.95

(coming soon)

€30.85 Excl. 23% VAT

Bedrock 3D black ABS Fusion+ filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS Fusion+ in black is a high-quality ABS filament that prints excellently without warping. Thanks to its optimised composition, it offers strong, reliable prints with a deep black appearance.

Key Features:

Print without warping, even without the printer closed
Adheres directly to glass or print bed without additional adhesive.
Compatible with water-soluble supports

Specifications

Amount:	0.75 kg	Material:	ABS Fusion+
Brand:	Bedrock 3D	Nozzle temp range:	240 - 260 °C
Colour:	black	Our item no:	DFB00268
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	110 °C	Spool width:	5.2 cm

Colour:

black

grey

neutral white

€37.95

€30.85 Excl. 23% VAT

EU warehouse

eSun black ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's black ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20031
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun blue ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's blue ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20014
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

In stock

eSun cold white ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's cold white ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Material:	ABS+
Brand:	eSun	Nozzle temp range:	230 - 270 °C
Colour:	cold white	Our item no:	DFE20124
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 mm
Heated bed temp:	95 - 110 °C	Outer diameter:	Ø 20.0 mm
Length:	400 m	Spool width:	6.5 mm

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun green ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's green ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20019
Colour:	green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun grey ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's grey ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20018
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

€25.50

€20.73 Excl. 23% VAT

In stock

eSun light blue ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's light blue ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20021
Colour:	light blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

In stock

eSun neutral ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20023
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

In stock

eSun orange ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's orange ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20025
Colour:	orange	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun neon green ABS+ filament 1.75mm, 1kg

Zoom in

Description The neon green ABS+ filament from eSun has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20024
Colour:	peak green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun purple ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's purple ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20026
Colour:	purple	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun red ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's red ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75 mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20027
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

In stock

eSun silver ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's silver ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20030
Colour:	silver	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun yellow ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's yellow ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20016
Colour:	yellow	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

In stock

eSun black eABS MAX filament 1.75mm, 1kg

Zoom in

Description eSun's black eABS MAX filament has excellent mechanical properties, flame retardancy, high toughness and impact resistance. The material is ideal for printing parts for cars, machines and electronics. Use the filament when printing at high temperatures. This eSun eABS MAX filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 270 °C
Brand:	eSun	Our item no:	DFE20037
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 100 °C	Spool width:	6.5 cm
Material:	eABS Max

€35.50

€28.86 Excl. 23% VAT

In stock

Polymaker black PC-ABS filament 1.75mm, 1kg

Zoom in

Description This black Polymaker PC-ABS filament is a very strong material. The base is ABS with added polycarbonate particles, making the filament print smoothly. Objects made with PC-ABS have good layer adhesion and a nice finish thanks to the subtle shine. The material is perfect for creating mechanical parts that need to be light, strong and wear-resistant. This black filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14004
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 105 °C	Spool width:	6.8 cm
Material:	PC-ABS

Colour:

black

white

€47.50

€38.62 Excl. 23% VAT

In stock

Polymaker white PC-ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PC-ABS filament in white is a very strong material. The base is ABS and polycarbonate particles have been added to this, making the filament print very pleasantly. Objects made with PC-ABS have good layer adhesion and a nice finish thanks to the subtle shine. The material is perfect for creating mechanical parts that need to be light, strong and wear-resistant. This white filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14006
Colour:	white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 105 °C	Spool width:	6.8 cm
Material:	PC-ABS

Colour:

black

white

€47.50

€38.62 Excl. 23% VAT

In stock

Polymaker PolyLite black ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright black colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14046
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite blue ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a deep blue colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14034
Colour:	blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite dark grey ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a dark grey colour. ABS is a very strong plastic that you can use to print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal printing temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14272
Colour:	dark grey	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Polymaker PolyLite green ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright green colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here .

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14040
Colour:	green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite grey ABS filament 1,75mm 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a clear grey colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14038
Colour:	grey	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Amount:

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite grey ABS filament 1.75mm, 3kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright grey colour. ABS is a very strong plastic that you can use to print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odors are released during printing.

The ideal printing temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C. Read more about printing with ABS filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14275
Colour:	grey	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	90 - 100 °C	Spool width:	11.9 cm
Material:	ABS

Amount:

1 kg

3 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€82.50

(coming soon)

€67.07 Excl. 23% VAT

Polymaker PolyLite light blue ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a light blue colour. ABS is a very strong plastic that you can use to print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal printing temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here .

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14273
Colour:	light blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Polymaker PolyLite orange ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright orange colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14042
Colour:	orange	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite purple ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright purple colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245°C to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90°C to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14050
Colour:	purple	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite red ABS filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright red colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality with few unpleasant odours during printing.

The ideal print temperature is 245 to 265 °C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100 °C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14044
Colour:	red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite turquoise ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a clear turquoise colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14048
Colour:	turquoise	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite white ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright white colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245°C to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90°C to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14052
Colour:	white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyLite yellow ABS filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable ABS filament with a diameter of 1.75mm and a bright yellow colour. ABS is a very strong plastic with which you can print hard and heat-resistant objects. This filament offers you excellent print quality and few unpleasant odours are released during printing.

The ideal print temperature is 245 to 265°C. A heated bed is required for printing with ABS. The recommended temperature for the heated bed is 90 to 100°C.

Read more about printing with ABS filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 265 °C
Brand:	Polymaker	Our item no:	DFP14036
Colour:	yellow	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	6.8 cm
Material:	ABS

Colour:

Filament diameter:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

REAL blue ABS Plus filament 1.75mm, 1kg

Zoom in

Description The blue REAL ABS Plus is a premium filament (1.75mm) that ensures beautiful results thanks to its bold colour. 3D printing with ABS Plus is very easy and produces super strong objects. With ABS Plus you no longer suffer from warping and the unpleasant ABS smell is almost no longer present.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFP02374
Colour:	blue	RAL colour no:	5015
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	90 - 110 °C	Inner diameter:	Ø 5.6 cm
Material:	ABS Plus	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	7.0 cm

Colour:

black

blue

neutral

€37.50

€30.49 Excl. 23% VAT

EU warehouse

REAL neutral ABS Plus filament 1.75mm, 1kg

Zoom in

Description The neutral REAL ABS Plus is a premium filament (1.75mm) that provides beautiful results thanks to its transparent colour. 3D printing with ABS Plus is very easy and produces super strong objects. With ABS Plus you no longer suffer from warping and the unpleasant ABS smell is almost no longer present.

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFP02375
Colour:	neutral	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	90 - 110 °C	Outer diameter:	Ø 20.0 cm
Material:	ABS Plus	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

black

blue

neutral

€37.50

€30.49 Excl. 23% VAT

EU warehouse

REAL black ABS Plus filament 1.75mm, 1kg

Zoom in

Description The black REAL ABS Plus is a premium filament (2.85mm) that provides beautiful results thanks to its transparent colour. 3D printing with ABS Plus is very easy and produces super strong objects. With ABS Plus you no longer suffer from warping and the unpleasant ABS smell is almost no longer present.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFP02378
Colour:	black	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	90 - 110 °C	Outer diameter:	Ø 20.0 cm
Material:	ABS Plus	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

black

blue

neutral

€37.50

€30.49 Excl. 23% VAT

EU warehouse

REAL black PC-ABS filament 1.75mm, 1kg

Zoom in

Description The black PC-ABS (polycarbonate-ABS 1.75mm) is an incredibly strong material for 3D printing. The filament has ABS as a base and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle gloss. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	REAL	Our item no:	DFP02379
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	95 - 105 °C	Inner diameter:	Ø 5.6 cm
Material:	PC-ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	7.0 cm

€68.50

€55.69 Excl. 23% VAT

EU warehouse

Spectrum Medical ABS filament 1.75mm, 1kg

Zoom in

Description

This 1.75mm Medical ABS filament from Spectrum is a premium material designed for medical and food-contact applications. Made from ABS pellets meeting USP Class VI and ISO 10993-1 standards, it is biocompatible for up to 30 days of human body contact and FDA/EU food-contact approved.

It ensures high-speed printing, strong layer adhesion, and a Vicat softening temperature of 95°C. Spectrum guarantees that the raw material contains no additives or modifications. Burning behavior: UL 94 (1.6 mm) – HB.

Ideal for prosthetics, rehabilitation aids, industrial design, and custom components. The 1kg spool is vacuum-packed in an aluminum bag with silica gel for protection.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 270 °C
Brand:	Spectrum	Our item no:	DFP16284
Colour:	neutral	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 100 °C	Spool width:	5.5 cm
Material:	ABS

€40.00

€32.52 Excl. 23% VAT

EU warehouse

Spectrum dark grey smart ABS filament 1.75mm, 1kg

Zoom in

Description Go for a durable and impact resistant filament with smart ABS from Spectrum. This filament has a high stiffness, shrinks little and emits few irritants during 3D printing. A big advantage is that this material retains all its properties even at a temperature of -40˚C. This makes smart ABS very suitable for making 3D prints that need to be able to withstand impact, industrial designs and tools. This is a 1.75mm dark grey filament on a 1kg spool.

Tip: You can get an extra smooth finish by post-processing your 3D print with acetone fumes.

Specifications

Amount:	1 kg	Material:	Smart ABS
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	grey	Our item no:	DFS10125
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	100 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Spectrum deep black smart ABS filament 1.75mm, 1kg

Zoom in

Description Go for a durable and impact resistant filament with smart ABS from Spectrum. This filament has a high stiffness, shrinks little and emits few irritants during 3D printing. A big advantage is that this material retains all its properties even at a temperature of -40˚C. This makes smart ABS very suitable for making 3D prints that need to be able to withstand impact, industrial designs and tools. This is a 1.75mm deep black filament on a 1kg spool.

Tip: You can get an extra smooth finish by post-processing your 3D print with acetone fumes.

Specifications

Amount:	1 kg	Material:	Smart ABS
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	black	Our item no:	DFS10126
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	100 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Spectrum polar white smart ABS filament 1.75mm, 1kg

Zoom in

Description Go for a durable and impact resistant filament with smart ABS from Spectrum. This filament has a high stiffness, shrinks little and emits few irritants during 3D printing. A big advantage is that this material retains all its properties even at a temperature of -40˚C. This makes smart ABS very suitable for making 3D prints that need to be able to withstand impact, industrial designs and tools. This is a 1.75mm polar white filament on a 1kg spool.

Tip: You can get an extra smooth finish by post-processing your 3D print with acetone fumes.

Specifications

Amount:	1 kg	Material:	Smart ABS
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	white	Our item no:	DFS10127
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	100 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Spectrum silver star smart ABS filament 1.75mm, 1kg

Zoom in

Description Go for a durable and impact resistant filament with smart ABS from Spectrum. This filament has a high stiffness, shrinks little and emits few irritants during 3D printing. A big advantage is that this material retains all its properties even at a temperature of -40˚C. This makes smart ABS very suitable for making 3D prints that need to be able to withstand impact, industrial designs and tools. This is a 1.75mm silver star filament on a 1kg spool.

Tip: You can get an extra smooth finish by post-processing your 3D print with acetone fumes.

Specifications

Amount:	1 kg	Material:	Smart ABS
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	silver	Our item no:	DFS10128
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	100 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Bedrock 3D neutral white ABS filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS filament in neutral white is a strong and heat-resistant filament, suitable for technical applications and functional parts. Thanks to its consistent quality, this filament is ideal for reliable and precise prints.

Key Features:

Printing temperature: 230 – 255°C, with excellent layer adhesion
Minimal shrinkage and odor when used in closed printers
Perfect for prototyping, end parts and post-processing

Specifications

Amount:	0.75 kg	Material:	ABS
Brand:	Bedrock 3D	Nozzle temp range:	230 - 255 °C
Colour:	neutral white	Our item no:	DFB00263
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.95

(coming soon)

€26.79 Excl. 23% VAT

Bedrock 3D red ABS filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS filament in red is a strong and reliable filament with a vibrant, even colour. Ideal for technical components that stand out or require colour coding.

Key Features:

Print temperature: 230 – 255°C
Heat resistant up to approx. 96°C
Good adhesion and minimal warping when used in a closed printer

Specifications

Amount:	0.75 kg	Nozzle temp range:	230 - 255 °C
Brand:	Bedrock 3D	Our item no:	DFB00266
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm
Material:	ABS

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.95

(coming soon)

€26.79 Excl. 23% VAT

Bedrock 3D neutral white ABS Fusion+ filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D ABS Fusion+ in neutral white is a high-quality ABS filament specially developed for easy, warp-free printing. Thanks to its unique material composition, you can effortlessly print strong, precise parts on virtually any FDM printer.

Key Features:

Print without warping, even without a closed printer
Adheres directly to glass or print bed without additional adhesive.
Compatible with water-soluble supports

Specifications

Amount:	0.75 kg	Material:	ABS Fusion+
Brand:	Bedrock 3D	Nozzle temp range:	240 - 260 °C
Colour:	neutral white	Our item no:	DFB00267
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	110 °C	Spool width:	5.2 cm

Colour:

black

grey

neutral white

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€37.95

(coming soon)

€30.85 Excl. 23% VAT

Buying ABS filament for your 3D printer? Order from 123-3d.ie for the best price!

At 123-3D.ie you pay the best price for ABS filament for your 3D printer. With this filament you can 3D print a wide variety of objects. Order ABS in various colours, in the common diameters 1.75mm and 2.85mm, or opt for filament with a glow in the dark effect. For 3D printing with ABS filament, a 3D printer with heated bed is highly recommended. This cools the 3D-printed object gradually and does not warp.

You can order ABS filament at 123-3D.ie in a large number of colours, from gold to pink. All supplies for the print bed can be ordered directly. You will find handy print stickers at 123-3D.ie. To beautifully finish your objects printed with ABS, we offer various finishing sets and articles. If you place an order with us before 7pm, you will most likely have it in your hands the next business-day.

Read more information on ABS filament here.

Do you have any questions about ordering ABS filament or another 3D product? Please refer to our Frequently Asked Questions page.

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

ABS

Buying ABS filament for your 3D printer? Order from 123-3d.ie for the best price!

Popular products