Dyze DyzEnd-X 12V/40W hot end for 1.75mm filament, 0.4mm

The DyzEnd is a hot end with a titanium heatbreak, which means it can handle high printing temperatures very well. Temperatures of 500°C are achievable. Due to its compact construction, the height loss of your 3D printer is limited

A very hard nozzle ensures a long life, even with highly corrosive materials. A unique washer makes it possible to change the nozzle without heating up. High throughput speeds can be achieved with the DyzeEnd

The following parts are included:

• DyzEnd-X
  • heat sink
  • heat break
  • heat block
  • nozzle (0.4mm)
  • seal washer
• Fan with connector
• Heating element with connector
• Temperature sensor ( #define TEMP_SENSOR_0 66 )
• Extension cables 3 x 100cm