Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Customer reviews

Official Reviews.io

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Arduino

Arduino DUE

Arduino DUE DAR00000

Description The Arduino DUE is a microcontroller board based on the 32-bit Atmel SAM3X8E ARM Cortex-M3 CPU. The board features 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 Mhz clock, a USB OTG connection, a power jack , an SPI header, a JTAG header, a reset button, and an erase button.

NOTE: the DUE operates at 3.3V. The maximum voltage on the I/O pins is therefore 3.3V. Higher voltages can damage the board.

Specifications

Brand:	Arduino	Dimensions:	101 x 53 mm
DC current for 3.3V pin:	800 ma	Our item no:	DAR00000
Input voltage:	7 - 12V recommended	Weight:	0.036 kg

€59.50

€48.37 Excl. 23% VAT

EU warehouse

Arduino Mega 2560 Rev3 (original)

Arduino Mega 2560 Rev3 (original) DAR00003

Description The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It features 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a ceramic resonator (16Mhz), a USB connection, a power jack, an ICSP header and a reset button.

The Arduino Mega 2560 Rev3 offers full microcontroller support and is easy to connect with a USB cable, AC-DC adapter or battery and you can start right away! The Mega is compatible with most shields made for the Arduino Uno, the Duemilanove or the Diecimila.

New features of the R3 version are:

ATmega16U2 as USB-to-serial converter instead of the 8U2
1.0 Pinout: Additional SDA and SCL pins, placed near the AREF pin, for TWI communication and two other new pins at the RESET pin: the IOREF that allows shields to adapt to the voltage supplied by the board. The second pin is a disconnected pin, reserved for future use
Stronger circuit breaker

Specifications

Brand:	Arduino	Operating volt logic:	5V
DC current for 3.3V pin:	50 ma	Processor:	ATMEGA 2560
DC current per I/O pin:	20 ma	Our item no:	DAR00003
EEPROM:	4KB	SRAM:	8 KB
Flash memory:	256 KB	Weight:	0.037 kg
Input voltage:	7 - 12V recommended	Width:	53 mm
Length :	101 mm

Order now, we can ship this tomorrow!

€67.50

€54.88 Excl. 23% VAT

In stock

Arduino Mega 2560 clone (123-3D version)

Arduino Mega 2560 clone (123-3D version) DRW00007

Description The Arduino MEGA2560 clone is a microcontroller board, based on the ATmega2560. This board has:

54x Digital input/output pins (of which 14 are suitable for PWM outputs)
16x Analog inputs, 4 UARTs (hardware serial ports)
16MHz crystal oscillator
Flash Memory 256KB (8KB already in use by the bootloader)
USB connection
power jack
ICSP header
Reset button

The microcontroller board can be connected via USB, an AC-DC adapter or a battery. This board is compatible with most shields designed for the Arduino, Mega Duemilanove or Diecim. The Arduino Atmega 2560 clone features a CH340G USB-to-Serial chip.

Specifications

Brand:	123-3D	Input voltage limits:	7.12V
DC current for 3.3V pin:	50 ma	Operating volt logic:	5V
DC current per I/O pin:	40 ma	Processor:	ATMEGA 2560
EEPROM:	4KB	Our item no:	DRW00007
Flash memory:	256 KB	SRAM:	8 KB
Input voltage:	7 - 12V recommended

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

Arduino Mega 2560 clone micro USB (123-3D version)

Arduino Mega 2560 clone micro USB (123-3D version) DRW00019

Description The Arduino MEGA2560 clone is a microcontroller board, based on the ATmega2560. This board has:

54 x digital input/output pins (of which 14 are suitable for PWM outputs);
16 x analog inputs, 4 UARTs (hardware serial ports)
16MHz crystal oscillator
Flash memory 256kB (8kB already in use by the bootloader)
Micro USB connection
Power jack
ICSP header
Reset button

The microcontroller board can be connected via micro-usb, an AC-DC adapter or a battery. This board is compatible with most shields designed for the Arduino, Mega Duemilanove or Diecim. The Arduino Atmega 2560 clone features a CH340G USB-to-Serial chip.

Specifications

Brand:	123-3D	Input voltage:	7 - 12V recommended
DC current for 3.3V pin:	50 ma	Input voltage limits:	7.12V
DC current per I/O pin:	40 ma	Processor:	ATMEGA 2560
EEPROM:	4KB	Our item no:	DRW00019
Flash memory:	256 KB	SRAM:	8 KB

€29.50

€23.98 Excl. 23% VAT

EU warehouse

Arduino Uno Rev.3 (original)

Arduino Uno Rev.3 (original) DAR00001

Description The Arduino Uno is a microcontroller board based on the ATmega328. The board offers full support for the microcontroller and can be easily connected to a computer (USB) or power adapter, after which you can get started right away.

The Uno is equipped with an ATmega16U2 (ATmega8U2 up to version R2) which is programmed as a USB/serial converter. An improvement over its predecessors featuring FTDI's USB/serial driver.

Characteristics:

Digital I/O pins: 14 (of which 6 can be used as PWM output)
Analog Inputs: 6
Contents: 16MHz clock crystal, UBS connector, power connector, ICSP header and reset button

Power supply specifications:

6V - 20V max. (adapter not included)
Microcontroller: ATmega328
Digital I/O pins: 14 (of which 6 can be used as PWM output)
DC current per I/O pin: 40mA
DC current per 3.3V pin: 50mA
Analog Inputs: 6
Flash memory: 32 KB (ATmega328) of which 0.5KB for the bootloader
SRAM: 2kB (ATmega328)
EEPROM: 1kB (ATmega328)
Clock Speed: 16MHz

Specifications

Brand:

Arduino

Our item no:

DAR00001

Order now, we can ship this tomorrow!

€31.50

€25.61 Excl. 23% VAT

In stock

Arduino Uno Rev.3 clone (123-3D version)

Arduino Uno Rev.3 clone (123-3D version) DAR00005

Description The Arduino Uno is a microcontroller board based on the ATmega328. The board offers full support for the microcontroller and can be easily connected to a computer (USB) or power adapter, after which you can get started right away.

The Arduino Uno Rev. 3 clone features a CH340G USB-to-Serial chip.

Specifications:

Digital I/O pins: 14 (of which 6 can be used as PWM output)
16MHz Clock Crystal
USB connection
ICSP connections on the PCB present
Reset button
Power supply 6V - 20V max. (adapter not included)
Microcontroller: ATmega328
DC current per I/O pin: 40mA
DC current per 3.3V pin: 50mA
Analog Inputs: 6
Flash memory: 32 KB (ATmega328) of which 0.5 kb for the bootloader
SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

Specifications

Brand:

123-3D

Our item no:

DAR00005

Order now, we can ship this tomorrow!

€16.75

€13.62 Excl. 23% VAT

In stock

USB to TTL Serial Converter CP2102 UART

USB to TTL Serial Converter CP2102 UART DRW00017

Description With this USB 2.0 to TTL converter you can easily connect a microcontroller to your PC. The converter is supplied with a 20cm connection cable. The USB uses the CP2102 converter chip.

The converter has 5 connections: 3.3V, TXD, RXD, GND and +5V.

Specifications

Brand:	123-3D	Our item no:	DRW00017
Cable length:	20 cm

€5.25

€4.27 Excl. 23% VAT

EU warehouse

Power supply ultra-compact | 12V | 18W, 1.5A

Power supply ultra-compact | 12V | 18W, 1.5A DPS00008

Description This 1.5A universal power supply is protected against overload and short circuit. This power supply has a fixed DC output voltage of 12V. The power supply has a max power of 18W and a cable length of 1.5 meters.

Specifications

Brand:	Velleman	Input voltage:	100-240V
Cable length:	150 cm	Power rating:	18 W
Dimensions:	64 x 27 x 42 mm	Our item no:	DPS00008

Order now, we can ship this tomorrow!

€19.50

€15.85 Excl. 23% VAT

In stock

Breadboard 830 insertion points

Breadboard 830 insertion points DBB00000

Description With this handy breadboard you can quickly and easily build your electronics circuit. The breadboard is of very high quality and has 2 buses of 25 connected terminals spread over 4 rows. There is a 6mm separating channel between the columns of 5 x 63 connections.

Specifications

Brand:	123-3D	Our item no:	DBB00000
Dimensions:	9 x 166 x 57 mm	Weight:	0.081 kg
Material:	ABS

Order now, we can ship this tomorrow!

€11.25

€9.15 Excl. 23% VAT

In stock

Breadboard 456 insertion points high quality

Breadboard 456 insertion points high quality DBB00001

Description With this handy breadboard you can quickly and easily build your electronics circuit. The breadboard is of very high quality and has 2 buses of 24 connected terminals spread over 4 rows. There is a 6mm separating channel between the columns of 6 x 30 connections.

Specifications

Brand:	123-3D	Our item no:	DBB00001
Dimensions:	9 x 81 x 62 mm	Weight:	0.05 kg
Material:	ABS

€9.25

€7.52 Excl. 23% VAT

EU warehouse

Wire jumpers 1 pin male to male, 150mm (10-pack)

Wire jumpers 1 pin male to male, 150mm (10-pack) DDK00018

Description With these pre-cut, stripped and pre-formed cables you can wire your prototype or breadboard. By using wire jumpers you can do this quickly and effortlessly. This set consists of 10 cables in different colours. The length of the wire jumpers is 150mm.

Specifications

Brand:	123-3D	Our item no:	DDK00018
Length:	15 cm

Order now, we can ship this tomorrow!

€5.50

€4.47 Excl. 23% VAT

In stock

Wire Jumpers 1 pin male to female, 150mm (10-pack)

Wire Jumpers 1 pin male to female, 150mm (10-pack) DDK00019

Description With these pre-cut, stripped and pre-formed cables you can wire your prototype or breadboard. By using wire bridges you can do this quickly and effortlessly. This set consists of 10 cables in different colours. The length of the wire bridges is 150mm. The diameter of the cables is 22-26AWG.

Specifications

Brand:	123-3D	Our item no:	DDK00019
Length:	15 cm

Order now, we can ship this tomorrow!

€5.50

€4.47 Excl. 23% VAT

In stock

Wire jumpers 1 pin male to male (65-pack)

Wire jumpers 1 pin male to male (65-pack) DDK00021

Description With these pre-cut, stripped and pre-formed cables you can wire your prototype or breadboard. By using wire jumpers you can do this quickly and effortlessly. This set consists of 65 cables in different colours. The length of the wire jumpers is 150mm. The diameter of the cables is 22-26AWG.

The set contains the following cable lengths:

10cm: 45 pieces
15cm: 10 pieces
20cm: 5 pieces
25cm: 5 pieces

Specifications

Brand:	123-3D	Quantity:	65
Our item no:	DDK00021

Order now, we can ship this tomorrow!

€7.75

€6.30 Excl. 23% VAT

In stock

Graphic LCD display 12864 smart controller

Graphic LCD display 12864 smart controller DRW00018

Description This graphic LCD display is suitable for Ramps 1.4. and is supplied complete with 30cm ribbon cables and adapter for Ramps 1.4. In addition to a beautiful display with a resolution of 128 x 64 pixels, the LCD also has an SD card slot, buzzer and a push button.

This LCD display is not compatible with the Minitronics, Megatronics and Ultratronics boards.

Specifications

Brand:	123-3D	Operating volt logic:	5V
Cable length:	30 cm	Our item no:	DRW00018
Height:	25 mm	Width:	87 mm
Length :	87 mm

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

GP LR44 alkaline button cell battery (1-pack)

GP LR44 alkaline button cell battery (1-pack) 215042

Description GP LR44 alkaline button cell battery of 1.5V. This battery is often used in watches.

Specifications

Brand:	GP	Voltage:	1.5 v
Our item no:	215042

Order now, we can ship this tomorrow!

€2.10

€1.71 Excl. 23% VAT

In stock

Jumpers (15-pack)

Jumpers (15-pack) DAR00006

Description These black jumpers are suitable for various electronics boards such as the Arduino boards, RAMPS and CNC shield. This pack contains 15 jumpers.

Specifications

Brand:	123-3D	Our item no:	DAR00006
Pin pitch:	2.54 mm

Order now, we can ship this tomorrow!

€2.50

€2.03 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2026 - 123-3d.ie