Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Home
ABS
1.75mm PC ABS

1.75mm PC ABS

View 2.85mm PC ABS Filament

1 - 18 of 18

REAL black PC-ABS filament 1.75mm, 1 kg

REAL black PC-ABS filament 1.75mm, 1 kg DFA02057

Description The black PC-ABS (polycarbonate ABS 1.75mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	REAL	Our item no:	DFA02057
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	95 - 105 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this on Monday!

€67.50

€54.88 Excl. 23% VAT

In stock

REAL white PC-ABS filament 1,75mm, 1kg

REAL white PC-ABS filament 1,75mm, 1kg DFA02059

Description The white PC-ABS (polycarbonate-ABS) (1.75mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	REAL	Our item no:	DFA02059
Colour:	white	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	95 - 105 °C	Inner diameter:	Ø 5.5 cm
Length:	400 m	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this on Monday!

€67.50

€54.88 Excl. 23% VAT

In stock

REAL neutral PVA Pro filament 1.75mm, 0.5kg

REAL neutral PVA Pro filament 1.75mm, 0.5kg DFV02004

Description The neutral PVA Pro is the ideal support filament (1.75mm) for ABS. This material is suitable for printing temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	235 - 255 °C
Colour:	neutral	Our item no:	DFV02004
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PVA Pro	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

Magigoo Pro 3D glue stick for PC filament, 50ml

Magigoo Pro 3D glue stick for PC filament, 50ml DCP00208

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00208	Volume:	50 ml
Type:	glue stick

€24.75

€20.12 Excl. 23% VAT

EU warehouse

REAL black PC-ABS filament 1.75mm, 1kg

REAL black PC-ABS filament 1.75mm, 1kg DFP02379

Description The black PC-ABS (polycarbonate-ABS 1.75mm) is an incredibly strong material for 3D printing. The filament has ABS as a base and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle gloss. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	REAL	Our item no:	DFP02379
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	95 - 105 °C	Inner diameter:	Ø 5.6 cm
Material:	PC-ABS	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	7.0 cm

€68.50

€55.69 Excl. 23% VAT

EU warehouse

123-3D black PC-ABS FR V0 filament 1.75mm, 1kg

123-3D black PC-ABS FR V0 filament 1.75mm, 1kg DHM00150

1
0

Description 123-3D version 1.75mm PC-ABS FR V0 filament is a halogen-free filament. It meets the highest safety regulations, is self-extinguishing and creates durable, precise 3D prints. In addition, it has a glossy surface, which also makes it look good visually.

Key Features:

Flame retardant
Halogen free
Excellent adhesion between layers
Stable printing

Applications: Ideal for making functional parts, designs that require fire resistance, and enclosures that protect electronic circuits.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 270 °C
Brand:	123-3D	Our item no:	DHM00150
Colour:	black	Roundness:	>95%
Density:	1.17	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	95 - 110 °C	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS FR V0	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€36.50

€29.67 Excl. 23% VAT

EU warehouse

123-3D white PC-ABS FR V0 filament 1.75mm, 1kg

123-3D white PC-ABS FR V0 filament 1.75mm, 1kg DHM00151

1
0

Description 123-3D version 1.75mm PC-ABS FR V0 filament is a halogen-free filament. It meets the highest safety regulations, is self-extinguishing and creates durable, precise 3D prints. In addition, it has a glossy surface, which also makes it look good visually.

Key Features:

Flame retardant
Halogen free
Excellent adhesion between layers
Stable printing

Applications: Ideal for making functional parts, designs that require fire resistance, and enclosures that protect electronic circuits.

Specifications

Amount:	1 kg	Nozzle temp range:	245 - 270 °C
Brand:	123-3D	Our item no:	DHM00151
Colour:	white	Roundness:	>95%
Density:	1.17	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	95 - 110 °C	Outer diameter:	Ø 20.0 cm
Material:	PC-ABS FR V0	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€36.50

€29.67 Excl. 23% VAT

EU warehouse

BIQU Panda Storage Rack for 3D filament

BIQU Panda Storage Rack for 3D filament DAR02687

1
0

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Dimensions:	1,320 x 635 x 330 mm
Colour:	black	Quantity:	1

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50 (coming soon)

€51.63 Excl. 23% VAT

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit DFR00002

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Brand:	123-3D	Dimensions:	160 x 180 x 125 mm
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this on Monday!

€10.25

€8.33 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this on Monday!

€34.75

€28.25 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this on Monday!

€76.50

€62.20 Excl. 23% VAT

In stock

123-3D ABS pellets, 1kg

123-3D ABS pellets, 1kg DPL00001

Description ABS pellets can be used by enthusiastic DIY'ers to make ABS filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Amount:	1 kg	Colour:	neutral
Brand:	123-3D	Our item no:	DPL00001

Order now, we can ship this on Monday!

€11.50

€9.35 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this on Monday!

€12.75

€10.37 Excl. 23% VAT

In stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this on Monday!

€7.75

€6.30 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament DCP00211

Description This kit contains four Magigoo 3D glue sticks. The Magigoo 3D Pro glue stick kit is suitable for printing with ABS, PA, PC and PP filament. The sticks ensure perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, you can simply remove it. The glue sticks are easy to use and prevent warping of prints.

Specifications

Brand:	Magigoo	Type:	glue stick
Our item no:	DCP00211

Order now, we can ship this on Monday!

€81.50

€66.26 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this on Monday!

€18.25

€14.84 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

© 2025 - 123-3d.ie