Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

Flsun SR (Super Racer) Delta 3D Printer

Flsun SR (Super Racer) Delta 3D Printer DKI00115

Description The Flsun SR 3D printer is a Delta printer with a cylindrical print volume of 260mm x 330mm. Unlike most box printers/Cartesian printers which traditionally use control over each axis via a direct belt or Z-axis, a Delta printer uses three vertical axes. By adjusting the height of each axis individually, the extruder can steer in all directions (XYZ).

In the design, stepper motor driven sliders have been chosen for the three vertical axes. The connection between them is via timing belts. Using Sliders instead of Timing belts results not only in higher accuracy but also in the possibility to print at higher speeds.

The printer can be controlled by means of the handy 3.5-inch touchscreen display that operates with Marlin open source firmware which is also compatible with various slicer programs such as Cura and Repetier.

A handy calibration tool can be used to calibrate the glass print bed. This can easily be removed via a magnetic strip and the calibration itself can be started via the touchscreen.

The Flsun SR continues with a 360W power supply and exchangeable glass bed. The maximum print bed temperature that can be reached is 100°C. All electronics (except PSU) are located in the upper part of the printer.

The main features:

Max Print speed 200mm/s
Precision 0.05mm-0.3mm
Removable glass bed
32-bit Motherboard
TMC2209 silent steps drivers
Supported file type: GCODE

Specifications

Brand:	Flsun	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	960 x 440 x 390 mm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	33 cm
Power rating:	360 W	Max print volume:	17.511
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00115
Has CNC option:	no	Weight:	13.6 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

Order now, we can ship this today!

€389.00 10% discount:

€350.10 (Incl. 23% VAT) (€284.63 Excl. 23% VAT)

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm DAR00946

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00946
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this today!

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm DAR00947

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00947
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm DAR00948

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00948
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this today!

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm DAR00949

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00949
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack) DAR00959

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Our item no:	DAR00959
Filament diameter:	1.75 mm	Quantity:	4
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€193.00 (Incl. 23% VAT) (€156.91 Excl. 23% VAT)

EU warehouse

Mintion Beagleprint 3D Printer Camera (32GB)

Mintion Beagleprint 3D Printer Camera (32GB) DAR00873

Description Monitor and remotely control your 3D printer? The Mintion Beagleprint 3D Printer Camera makes it possible. The camera allows you to monitor and control printing processes remotely and in real time. If something goes wrong, you'll know right away. You can then simply stop printing using the app. This prevents a print from completely failing and filament being lost unnecessarily. Because the camera has a night mode, no extra lighting is needed when filming in the dark – useful if your printer also works overtime at night. So you save on energy!

An image is also made after printing each layer. And without any setting or command, the camera then generates a beautiful Time-lapse video. You can download this via the app or your PC. The camera is suitable for a large number of 3D printers.

Check here whether your printer is compatible.

Specifications

Brand:	Mintion	Storage:	32GB
Network:	WiFi	Weight:	0.15 kg
Our item no:	DAR00873

Order now, we can ship this today!

€85.50 (Incl. 23% VAT) (€69.51 Excl. 23% VAT)

In stock

Flsun V400 extruder

Flsun V400 extruder DAR00998

1
0

Description This Flsun extruder is an original replacement part for Flsun V400 3D printers.

Specifications

Brand:	Flsun	Input voltage:	12V
Filament diameter:	1.75 mm	Our item no:	DAR00998

€53.50 (Incl. 23% VAT) (€43.50 Excl. 23% VAT)

EU warehouse

Flsun SR touchscreen

Flsun SR touchscreen DAR01008

Description This Flsun SR Touchscreen is an original replacement part for Flsun 3D printers.

Specifications

Brand:	Flsun	Weight:	0.2 kg
Our item no:	DAR01008

€54.50 (Incl. 23% VAT) (€44.31 Excl. 23% VAT)

EU warehouse

Flsun SR hotend kit

Flsun SR hotend kit DAR01009

Description This Flsun SR hotend kit is an original replacement part for the hotend of Flsun 3D printers.

Specifications

Brand:	Flsun	Our item no:	DAR01009
Filament diameter:	1.75 mm	Screwthread type:	M6

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

Flsun SR glass plate, 270mm x 4mm

Flsun SR glass plate, 270mm x 4mm DAR01010

Description This Flsun SR glass plate is perfect for Flsun SuperRacer models. The glass plate is super flat, does not deform, is durable, has good hardness and is compatible with many models. It is an original replacement part for Flsun SuperRacer 3D printers.

Specifications

Brand:

Flsun

Our item no:

DAR01010

€21.50 (Incl. 23% VAT) (€17.48 Excl. 23% VAT)

EU warehouse

Flsun SR heater block

Flsun SR heater block DAR01012

Description This Flsun SR heater block is an original part for Flsun SuperRacer models. The heating block has good heat resistance and excellent thermal conductivity.

Specifications

Brand:

Flsun

Our item no:

DAR01012

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

Flsun SR/Q5 heater cartridge | 24V, 40W

Flsun SR/Q5 heater cartridge | 24V, 40W DAR01014

Description The Flsun SR/Q5 heater cartridge is an original replacement part for Flsun 3D printers. This heating element brings your hotend to the right temperature very quickly. The cable length is 17cm.

Specifications

Brand:	Flsun	Power rating:	40 W
Cable length:	17 cm	Our item no:	DAR01014
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

€8.50 (Incl. 23% VAT) (€6.91 Excl. 23% VAT)

EU warehouse

Flsun SR/Q5 hotend thermistor

Flsun SR/Q5 hotend thermistor DAR01015

Description This original Flsun SR/Q5 hotend thermistor has a cable length of 18cm and is an original replacement part for Flsun 3D printers.

Specifications

Brand:	Flsun	Max temp:	300 °C
Cable length:	18 cm	Our item no:	DAR01015

€7.50 (Incl. 23% VAT) (€6.10 Excl. 23% VAT)

EU warehouse

Flsun SR/Q5 Heatsink

Flsun SR/Q5 Heatsink DAR01021

Description This Flsun heatsink is suitable for 1.75mm filament. When inserting filament, cut the tip diagonally to facilitate insertion. This heatsink can be used as a replacement or spare part.

This product can be used for the Flsun SR and the Flsun Q5.

Specifications

Brand:	Flsun	Our item no:	DAR01021
Filament diameter:	1.75 mm

€12.50 (Incl. 23% VAT) (€10.16 Excl. 23% VAT)

EU warehouse

AF ISO250 isoclene spray, 250ml

AF ISO250 isoclene spray, 250ml 152006

Description AF ISO250 isoclene spray is a 99.7% pure isopropanol alcohol solution suitable for cleaning surfaces. Clean your equipment safely with this spray, which leaves no residue. For best results, clean using a cloth or cotton bud.

Specifications

Brand:	AF	Type:	-
Our item no:	152006	Volume:	250 ml

Order now, we can ship this today!

€10.75 (Incl. 23% VAT) (€8.74 Excl. 23% VAT)

In stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT) (€28.25 Excl. 23% VAT)

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this today!

€76.50 (Incl. 23% VAT) (€62.20 Excl. 23% VAT)

In stock

3D Printer starter/finishing/maintenance kit

3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon) (Incl. 23% VAT) (€68.70 Excl. 23% VAT)

Steelmans 3dB noise reduction feet pads

Steelmans 3dB noise reduction feet pads DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

Order now, we can ship this today!

€17.00 (Incl. 23% VAT) (€13.82 Excl. 23% VAT)

In stock

Calex Smart WiFi smoke detector

Calex Smart WiFi smoke detector LCA00437

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Are you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz Wi-Fi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Calex	Our item no:	LCA00437
Colour:	white	Weight:	0.23 kg
Diameter:	110 mm	WiFi:	2.4 GHz
Dimensions:	57.15 mm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon) (Incl. 23% VAT) (€25.61 Excl. 23% VAT)

Calex Smart mini indoor camera (1080p)

Calex Smart mini indoor camera (1080p) LCA00572

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Brand:	Calex	Our item no:	LCA00572
Colour:	white	WiFi:	2.4 GHz
Dimensions:	110 x 53 x 32 mm

€41.50 (Incl. 23% VAT) (€33.74 Excl. 23% VAT)

EU warehouse

WOOX smart indoor camera

WOOX smart indoor camera LWO00056

Description Use this smart indoor camera from WOOX to keep an eye on your 3D printer, children, pets and belongings and to secure your home. The WOOX camera can be operated via WiFi with your smartphone or tablet.

In addition, the camera provides a clear image in Full HD 1080p resolution that can be viewed live or stored locally (or on a cloud service), and has a built-in microphone and speaker so that you can communicate with people nearby via your device. camera can communicate. It is also equipped with a motion sensor and infrared vision (up to 7 metres).

*A Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Woox	Our item no:	LWO00056
Colour:	white	Voltage:	220 v
Height:	116 mm	WiFi:	2.4 GHz

Works with


Tuya	Google*	Alexa*	Siri

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

EU warehouse

123ink air pressure cleaner, 400ml

123ink air pressure cleaner, 400ml 301186

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:

123inkt

Volume:

400 ml

Order now, we can ship this today!

€7.75 (Incl. 23% VAT) (€6.30 Excl. 23% VAT)

In stock

WOOX smart PTZ camera

WOOX smart PTZ camera LWO00047

3
2
1
0

Description Use this smart PTZ camera from WOOX to keep an eye on your home at any time and wherever you are. You can connect the camera to an app on your phone or tablet, which will send you notifications if something is wrong. This way you always know what is happening at home or in your business premises.

The camera makes super-sharp video images (1080p) that can be viewed at any time. Because the head of the camera can also move, you have a 360° overview of a room and you can really see everything. For the best view, the PTZ camera can even be controlled and rotated live at all times. Or zoom in to see something better.

The package contains the indoor PTZ camera, a USB cable, a mounting bracket, an adapter, screws and stickers and a user manual.

Woox smart HD indoor camera video:
Video

*A Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Woox	Voltage:	220 v
Colour:	white	WiFi:	2.4 GHz
Height:	107 mm

Please note: The delivery time for this item is currently unknown.

€35.50 (Incl. 23% VAT) (€28.86 Excl. 23% VAT)

EU warehouse

© 2025 - 123-3d.ie