Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

73 - 96 of 101

Modefine 3D M2 hotend for P1 series (ceramic heater+thermistor)

Modefine 3D M2 hotend for P1 series (ceramic heater+thermistor) DAR01647

Description This all-metal M2 hotend contains a ceramic heater and thermistor. It has an improved nozzle structure, where the heating block and nozzle are connected with a screw thread. This means there is less chance of material leaking during printing. The nozzle is made of SKD11 hardened steel, which means this hotend can handle a temperature of up to 320˚C. Because the radiator and the heating block are connected by two screws, there is less chance of problems during high-speed 3D printing. Finally, there is better heat conduction thanks to the use of a nickel-plated chromium zirconium and copper alloy. This hotend is suitable for the P1 series 3D printers from Bambu Lab.

Specifications

Brand:	Modefine 3D	Extruder max temp:	320 °C
Filament diameter:	1.75 mm	Our item no:	DAR01647
Nozzle diameter:	0.4 mm	Weight:	0.036 kg

€22.50

€18.29 Excl. 23% VAT

EU warehouse

Modefine 3D Hardening Nozzle 0.2mm

Modefine 3D Hardening Nozzle 0.2mm DAR01651

Description This 0.2mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Brand:	Modefine 3D	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR01651
Material:	Hardened Steel	Weight:	0.03 kg
Max temp:	400 °C

Nozzle diameter:

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Modefine 3D Hardening Nozzle 0.4mm

Modefine 3D Hardening Nozzle 0.4mm DAR01652

Description This 0.4mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Brand:	Modefine 3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01652
Material:	Hardened Steel	Weight:	0.03 kg
Max temp:	400 °C

Nozzle diameter:

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Modefine 3D Hardening Nozzle 0.6mm

Modefine 3D Hardening Nozzle 0.6mm DAR01653

Description This 0.6mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Brand:	Modefine 3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR01653
Material:	Hardened Steel	Weight:	0.03 kg
Max temp:	400 °C

Nozzle diameter:

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Modefine 3D Hardening Nozzle 0.8mm

Modefine 3D Hardening Nozzle 0.8mm DAR01654

Description This 0.8mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Brand:	Modefine 3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR01654
Material:	Hardened Steel	Weight:	0.03 kg
Max temp:	400 °C

Nozzle diameter:

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.50 (coming soon)

€5.28 Excl. 23% VAT

E3D Bambu Lab Metal Only High Flow ObXidian, 0.40mm

E3D Bambu Lab Metal Only High Flow ObXidian, 0.40mm DAR01774

Description The ObXidian high flow hotend is specially designed for the X1 and P1 series from Bambu Lab. Thanks to this hotend, these fast 3D printers can print even more efficiently. With the wear-resistant ObXidian hotend, you can count on reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to filaments that are reinforced with fibres. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend has a 0.4mm nozzle and is suitable for the X1, X1 Carbon, PS1 and P1P 3D printers from Bambu Lab.

Please note: This product contains only the metal parts.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01774

Nozzle diameter:

€99.50

€80.89 Excl. 23% VAT

EU warehouse

E3D Bambu Lab Metal Only High Flow ObXidian, 0.60mm

E3D Bambu Lab Metal Only High Flow ObXidian, 0.60mm DAR01775

1
0

Description The ObXidian high flow hotend is specially designed for the X1 and P1 series from Bambu Lab. Thanks to this hotend, these fast 3D printers can print even more efficiently. With the wear-resistant ObXidian hotend, you can count on reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to filaments that are reinforced with fibres. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend has a 0.6mm nozzle and is suitable for the X1, X1 Carbon, PS1 and P1P 3D printers from Bambu Lab.

Please note: This product contains only the metal parts.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR01775

Nozzle diameter:

€99.50

€80.89 Excl. 23% VAT

EU warehouse

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.40mm

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.40mm DAR01776

Description The ObXidian high flow hotend is specially designed for the P1 series of Bambu Lab. Thanks to this hotend, these fast 3D printers can print even more efficiently. With the wear-resistant ObXidian hotend, you can count on reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to filaments that are reinforced with fibres. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend contains a 0.4mm nozzle and is suitable for the PS1 and P1P 3D printers from Bambu Lab.

Please note: This product is not compatible with the X1E 3D printer

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01776

Nozzle diameter:

€141.50

€115.04 Excl. 23% VAT

EU warehouse

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.60mm

E3D Bambu Lab P1 High Flow ObXidian Kit, 0.60mm DAR01777

Description The ObXidian high flow hotend is specially designed for the P1 series of Bambu Lab. Thanks to this hotend, these fast 3D printers can print even more efficiently. With the wear-resistant ObXidian hotend, you can count on reliable and consistent extrusion. The coating in the heated parts and the nozzle provides protection against damage to filaments that are reinforced with fibres. The nozzle also has a non-stick protective layer to prevent plastic accumulation. This hotend contains a 0.6mm nozzle and is suitable for the PS1 and P1P 3D printers from Bambu Lab.

Please note: This product is not compatible with the X1E 3D printer

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR01777

Nozzle diameter:

€141.50

€115.04 Excl. 23% VAT

EU warehouse

Capricorn Bambu Lab AMS upgrade kit

Capricorn Bambu Lab AMS upgrade kit DAR01891

Description The Capricorn AMS kit from Bambu Lab contains 4 metres of TL-Series PTFE tubing, allowing you to upgrade your current PTFE tubing. These tubes protect your filament from dust and humidity, allowing you to always produce perfect prints. The kit contains everything you need to replace your tubes.

Specifications

Brand:	Capricorn	Length:	4 m
Colour:	blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Inner diameter:	2 mm	Our item no:	DAR01891

€33.50

€27.24 Excl. 23% VAT

EU warehouse

Bambu Lab P1P Display Connector Cable

Bambu Lab P1P Display Connector Cable DAR01335

Description You can use the Bambu Lab P1P Display Connector Cable to connect the motherboard and the high-resolution display. The cable transmits SD card data and images between the 3D printer and the display. This product is only suitable for the Bambu Lab P1P.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01335

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series & A1 mini WiFi antenna

Bambu Lab P1 Series & A1 mini WiFi antenna DAR01991

Description This Bambu Lab WiFi antenna improves the WiFi signal so that the 3D printer can connect better to the network. This product is suitable for the P1 series and A1 mini from Bambu Lab and contains the following parts:

1 x WiFi antenna

Specifications

Brand:

Bambu Lab

Our item no:

DAR01991

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.95 (coming soon)

€5.65 Excl. 23% VAT

BIQU CryoGrip Pro Glacier Buildplate, 257mm x 257mm Suitable for X1 / P1 / A1

BIQU CryoGrip Pro Glacier Buildplate, 257mm x 257mm DAR02084

Description This BIQU CryoGrip Pro Glacier buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments including ABS, TPU and PA at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257mm x 257mm and is suitable for the X1/P1/A1 3D printer from Bambu Lab.

Please note: The Glacier buildplate can be used for PLA and PETG, but excels with other materials. If you plan on printing with PLA and/or PETG only, the Frostbite buildplate is also an excellent choice. It has a rougher texture and offers fantastic adhesion to PLA and PETG.

Specifications

Brand:	BIQU	Our item no:	DAR02084
Dimensions:	257 x 257 mm	Variant:	X1 Carbon / P1P / P1S / A1

Order now, we can ship this tomorrow!

€32.95

€26.79 Excl. 23% VAT

In stock

Bambu Lab Makers Supply Triple-axis Tourbillon Model Components Kit 007

Bambu Lab Makers Supply Triple-axis Tourbillon Model Components Kit 007 DAR02097

2
1
0

Description This hardware kit contains everything you need to make a triple axis tourbillon model. To make the complete model, you also need to download and print the parts of the model. The kit contains:

3 x M2x6 FHCS (Machine Screw)
24 x M2x8 FHCS (Machine Screw)
11 x M2x10 FHCS (Machine Screw)
2 x M2x12 FHCS (Machine Screw)
1 x M2x14 FHCS (Machine Screw)
8 x M2.5x6 BHCS (Machine Screw)
2 x M3x23 SHCS (Machine Screw)
6 x MR52 Steel Deep Groove Ball Bearing
1 x 6704 Steel Deep Groove Ball Bearing
1 x F8-14M Miniature Plane Thrust Ball Bearing
6 x MR128 Steel Deep Groove Ball Bearings
16 x 6mm Stainless Steel Ball
1 x 2*13mm Brass Dowel Pin
1 x 2*22mm Brass Dowel Pin
1 x 2*32mm Brass Dowel Pin
1 x TT Motor (DC5V 59RPM CCW Single Axis)

Please note: this kit only contains the mechanical parts. The other parts need to be 3D printed by yourself. Also always use a USB power supply with the correct voltage.

Tip: Check the mechanism before connecting it to the power. This can easily be done by turning the handle. Always make sure that the motor is not blocked.

Specifications

Brand:	Bambu Lab	Voltage:	5 v
Our item no:	DAR02097	Weight:	0.079 kg

€44.50

€36.18 Excl. 23% VAT

EU warehouse

Bambu Lab Makers Supply Jet Engine Kit Collection

Bambu Lab Makers Supply Jet Engine Kit Collection DAR02098

3
2
1
0

Description This hardware kit contains everything you need to make an engine model. To make the complete model, the parts of the model must also be downloaded and printed. This kit contains:

80 x M2.5x10 SHCS (Machine Screw)
80 x M2.5 Stainless Steel Hex Nut
150 x M2.5x5x0.5 Stainless Steel Flat Washer
2 x 6204 Plastic Deep Groove Ball Bearing
2 x 6003 Plastic Deep Groove Ball Bearing

Specifications

Brand:

Bambu Lab

Our item no:

DAR02098

Please note: The delivery time for this item is currently unknown.

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ CM2™ - Hardend Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ CM2™ - Hardend Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S DAR02209

Description This Microswiss FlowTech CM2 hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1 x FlowTech™ Heater Core for Bambu Lab (P1-series)
1 x Heatsink for Bambu Lab
1 x FlowTech 0.4mm Nozzle (CM2™)
2 x Titanium hotend mounting screws
1 x Silicon Sock
2 x Fan mounting shoulder screws
1 x Printed Nozzle Changing Tool

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02209

€104.50

€84.96 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ CM2™ CHT - Hardened Tip - High Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ CM2™ CHT - Hardened Tip - High Flow - Hotend for Bambu Lab P1P/P1S DAR02210

Description This Microswiss FlowTech CM2 CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech CHT High Flow Nozzles, the print speed can even reach 50mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1 x FlowTech™ Heater Core for Bambu Lab (P1-series)
1 x Heatsink for Bambu Lab
1 x FlowTech 0.4mm Nozzle (CM2™, CHT, CM2™ CHT, DiamondBack)
2 x Titanium hotend mounting screws
1 x Silicon Sock
2 x Fan mounting shoulder screws
1 x Printed Nozzle Changing Tool

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02210

€114.50

€93.09 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ Brass Plated CHT - High Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ Brass Plated CHT - High Flow - Hotend for Bambu Lab P1P/P1S DAR02211

Description This Microswiss FlowTech Brass Plated CHT hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. In combination with the Bondtech FlowTech™ - Brass Plated Nozzle, the flow rate can even increase to 50 mm/s. Thanks to the closed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1 x FlowTech™ Heater Core for Bambu Lab (P1-series)
1 x Heatsink for Bambu Lab
1 x FlowTech™ - 0.4mm Brass Plated Nozzle
2 x Titanium hotend mounting screws
1 x Silicon Sock
2 x Fan mounting shoulder screws
1 x Printed Nozzle Changing Tool

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02211

€109.50

€89.02 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ DiamondBack - Diamond Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S

Micro Swiss FlowTech™ DiamondBack - Diamond Tip - Standard Flow - Hotend for Bambu Lab P1P/P1S DAR02212

Description This Microswiss FlowTech DiamondBack hotend is specially designed for improved performance. The hotend is plug-and-play, making it easy to install and use right away. Thanks to the sealed heater core, the heat is effectively retained, keeping the temperature consistent and stable. It is also leak-free, which reduces the chance of damaging other parts and extends the lifespan of the hotend. This hotend is suitable for the Bambu Lab P1P and P1S. The package contains:

1 x FlowTech™ Heater Core for Bambu Lab (P1-series)
1 x Heatsink for Bambu Lab
1 x FlowTech 0.4mm Nozzle (CM2™, CHT, CM2™ CHT, DiamondBack)
2 x Titanium hotend mounting screws
1 x Silicon Sock
2 x Fan mounting shoulder screws
1 x Printed Nozzle Changing Tool

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02212

€216.50

€176.02 Excl. 23% VAT

EU warehouse

Bamboo Lab AMS 2 Pro Pre-Order

Bamboo Lab AMS 2 Pro DAR02425

Description Pre-Order.

The Bambu Lab AMS 2 Pro is an advanced automatic material management system specifically designed for multi-colour and multi-material 3D printing. With support for up to 24 filaments and integrated drying functions up to 65°C, this system offers reliable performance and increased print quality. RFID recognition, a powerful servo motor and a user-friendly design make the AMS 2 Pro a valuable addition to any Bambu Lab 3D printer.

Support for 24 filaments by serial connection of multiple AMS units
Integrated filament drying up to 65°C with automatic rinse rotation and air dehumidification
RFID synchronisation for automatic recognition and setup of Bambu Lab filaments

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to delivery.

Specifications

Brand:	Bambu Lab	Dimensions:	226 x 372 x 280 mm
Filament diameter:	1.75 mm	Weight:	2.5 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€469.00 (coming soon)

€381.30 Excl. 23% VAT

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this tomorrow!

€34.75

€28.25 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this tomorrow!

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Steelmans 3dB noise reduction feet pads DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

Order now, we can ship this tomorrow!

€17.00

€13.82 Excl. 23% VAT

In stock

© 2025 - 123-3d.ie