Home
3D printers
Geeetech Prusa i3 Pro B

Geeetech Prusa i3 Pro B

GEEETECH A10 Series, A20 Series, A30 Series endstop module for hot end for A10T, A30T, A20T, A20, A30Pro printers

Description This is a replacement A10 Series, A20 Series, A30 Series endstop module for hot end. It is suitable for A10T, A30T, A20T, A20, A30Pro printers with a V4.1B mainboard.

Specifications

Brand:

Geeetech

Our item no:

DAR00667

€2.75

€2.24 Excl. 23% VAT

In stock

GEETECH axial fan 12V for Pro B, 40mm x 40mm x 10mm

Zoom in

Description Original Geeetech fan for cooling the hotend and mainboard of the Pro B 3D printer. The axial fan is equipped with a connection cable with 2 pin connector and 15cm long.

Specifications

Brand:	Geeetech	Dimensions:	10 x 40 x 40 mm
Cable length:	15 cm	Max RPM:	6,000 rpm
Current rating:	0.11 A	Our item no:	DAR00683
Fan type:	axial	Voltage:	12 v

€7.50

€6.10 Excl. 23% VAT

EU warehouse

GEEETECH end stop kit for the Prusa i3 Pro B 3D Printer

Zoom in

Description Replace a defective end stop on your GEEETECH i3 Pro B printer with this set of 3 and you will immediately have spare end stops in stock.

Specifications

Brand:

Geeetech

Our item no:

DAR00684

€10.50

€8.54 Excl. 23% VAT

EU warehouse

GEEETECH thermistor with cable for Prusa i3 Pro B 3D Printer, 70cm

Zoom in

Description Original Geeetech hotend thermistor to replace a defective thermistor on the i3 Pro B printer. The cable length is 70cm and is equipped with a 2 pin connector.

Specifications

Brand:	Geeetech	Our item no:	DAR00685
Cable length:	70 cm

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

€17.00

€13.82 Excl. 23% VAT

In stock

Calex Smart WiFi smoke detector

Zoom in

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Are you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz Wi-Fi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Calex	Our item no:	LCA00437
Colour:	white	Weight:	0.23 kg
Diameter:	110 mm	WiFi:	2.4 GHz
Dimensions:	57.15 mm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Calex Smart mini indoor camera (1080p)

Zoom in

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Brand:	Calex	Our item no:	LCA00572
Colour:	white	WiFi:	2.4 GHz
Dimensions:	110 x 53 x 32 mm

€41.50

€33.74 Excl. 23% VAT

EU warehouse

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

€7.75

€6.30 Excl. 23% VAT

In stock

WOOX smart PTZ camera

Zoom in

Description Use this smart PTZ camera from WOOX to keep an eye on your home at any time and wherever you are. You can connect the camera to an app on your phone or tablet, which will send you notifications if something is wrong. This way you always know what is happening at home or in your business premises.

The camera makes super-sharp video images (1080p) that can be viewed at any time. Because the head of the camera can also move, you have a 360° overview of a room and you can really see everything. For the best view, the PTZ camera can even be controlled and rotated live at all times. Or zoom in to see something better.

The package contains the indoor PTZ camera, a USB cable, a mounting bracket, an adapter, screws and stickers and a user manual.

Woox smart HD indoor camera video:
Video

*A Voice Assistant is required to use Google or Alexa.

Specifications