BuildTak

Description With the BuildTak spatula you can easily remove 3D prints from the print bed.

This spatula is made of high-quality stainless steel and has a thin front so that you can easily remove your prints from the print bed, without damaging them. Equipped with an ergonomic non-slip handle for extra grip.

Specifications

Brand:	BuildTak	Our item no:	DME00222
Dimensions:	132 mm

€22.50

€18.29 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 220mm x 220mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 220mm x 220mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00178
Dimensions:	220 x 220 mm

€19.75

€16.06 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 235mm x 235mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 235mm x 235mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00179
Dimensions:	235 x 235 mm	Type:	nylon plus

€22.75

€18.50 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 241mm x 254mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 241 x 254mm and is manufactured in the United States.

NOTE: This variant is suitable for the Prusa MK3!

Specifications

Brand:	BuildTak	Our item no:	DME00185
Dimensions:	241 x 254 mm	Type:	nylon plus

€24.75

€20.12 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 300mm x 300mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 300mm x 300mm and is manufactured in the United States.

PLEASE NOTE: This variant is only suitable for the Taz6!

Specifications

Brand:	BuildTak	Our item no:	DME00180
Dimensions:	300 x 300 mm

€33.50

€27.24 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 310mm x 320mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 310mm x 320mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00181
Dimensions:	310 x 320 mm	Type:	nylon plus

€39.50

€32.11 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 406mm x 406mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 406mm x 406mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00182
Dimensions:	406 x 406 mm	Type:	nylon plus

€56.50

€45.93 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ foil bonding platform, 500mm x 500mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 500mm x 500mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00183
Dimensions:	500 x 500 mm	Type:	nylon plus

€87.50

€71.14 Excl. 23% VAT

EU warehouse

BuildTak Nylon+ bonding platform film, 600mm x 600mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality Nylon+ film from BuildTak.

This bonding platform is provided with a special No-Cleanup adhesive and is easy to apply to the print bed. The foil is specially designed to improve the bed adhesion of your Nylon 3D prints for an optimal result. In addition, Nylon+ also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 600mm x 600mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00184
Dimensions:	600 x 600 mm	Type:	nylon plus

€127.00

€103.25 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 220mm x 220mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 220mm x 220mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00169
Dimensions:	220 x 220 mm

€18.75

€15.24 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 235mm x 235mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 235mm x 235mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00170
Dimensions:	235 x 235 mm	Type:	PEI

€22.75

€18.50 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 241mm x 254mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 241mm x 254mm and is manufactured in the United States.

NOTE: This variant is suitable for the Prusa MK3

Specifications

Brand:	BuildTak	Our item no:	DME00176
Dimensions:	241 x 254 mm	Type:	PEI

€22.75

€18.50 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 300mm x 300mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 300mm x 300mm and is manufactured in the United States.

PLEASE NOTE: This variant is only suitable for the Taz6!

Specifications

Brand:	BuildTak	Our item no:	DME00171
Dimensions:	300 x 300 mm

€30.50

€24.80 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 310mm x 320mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 310mm x 320mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00172
Dimensions:	310 x 320 mm	Type:	PEI

€46.50

€37.80 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 406mm x 406mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 406mm x 406mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00173
Dimensions:	406 x 406 mm	Type:	PEI

€55.50

€45.12 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 500mm x 500mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has an area of 500mm x 500mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00174
Dimensions:	500 x 500 mm	Type:	PEI

€81.50

€66.26 Excl. 23% VAT

EU warehouse

BuildTak PEI foil bonding platform, 600mm x 600mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality PEI film from BuildTak.

This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PETG filament. In addition, PEI also ensures that you can easily remove your print from the print bed. The bonding platform has a surface area of 600mm x 600mm and is manufactured in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00175
Dimensions:	600 x 600 mm	Type:	PEI

€113.00

€91.87 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate PEI 3-piece system for Ultimaker S5, 260mm x 354mm

Zoom in

Description The BuildTak FlexPlate system with PEI adhesive platform film allows you to easily remove your 3D prints from the print bed!

The set consists of a flexible circuit board, a magnetic mounting plate and one sheet of PEI adhesive platform foil. All designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

Mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface. Done!

This variant of the FlexPlate system is only suitable for the Ultimaker S5, has a print bed surface of 260mm x 354mm and is produced in the United States.

TIP: To avoid printing problems, adjust the height of your Z-axis to compensate for the thickness of the new print bed.

Specifications

Brand:	BuildTak	Our item no:	DME00193
Dimensions:	260 x 354 mm	Type:	flexplate

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€137.00 (coming soon)

€111.38 Excl. 23% VAT

BuildTak FlexPlate, 220mm x 220mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favourable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

This plate is suitable for various 3D printers with a print bed surface of 220mm x 220mm and produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications

Brand:	BuildTak	Our item no:	DME00194
Dimensions:	220 x 220 mm

€25.50

€20.73 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate, 235mm x 235mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favorable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!
This plate is suitable for various 3D printers with a print bed surface of 235mm x 235mm and produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications

Brand:	BuildTak	Our item no:	DME00195
Dimensions:	235 x 235 mm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate, 300mm x 300mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favorable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

This FlexPlate is only suitable for the Taz6, has a print bed surface of 300mm x 300mm and is produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications

Brand:	BuildTak	Our item no:	DME00196
Dimensions:	300 x 300 mm

€41.50

€33.74 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate, 406mm x 406mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favorable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!
This plate is suitable for various 3D printers with a print bed surface of 406mm x 406mm and produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications

Brand:	BuildTak	Our item no:	DME00198
Dimensions:	406 x 406 mm	Type:	flexplate

€59.50

€48.37 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate, 600mm x 600mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favorable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

This plate is suitable for various 3D printers with a print bed surface of 600mm x 600mm and produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications

Brand:	BuildTak	Our item no:	DME00200
Dimensions:	600 x 600 mm	Type:	flexplate

€129.00

€104.88 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate system, 220mm x 220mm (3-pack)

Zoom in

Description The set consists of BuildTak Magnetic Mounting Base (magnetic base), BuildTak FlexPlate (flexible spring steel sheet), and a BuildTak Sheet (adhesive printing surface). All designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

Mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface. Done!

The FlexPlate system is suitable for various 3D printers with a print bed surface of 220mm x 220mm and is produced in the United States.

TIP: To avoid printing problems, adjust the height of your Z-axis to compensate for the thickness of the new print bed.

Specifications

Brand:	BuildTak	Our item no:	DME00186
Dimensions:	220 x 220 mm

€84.50

€68.70 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate system, 235mm x 235mm (3-pack)

Zoom in

Description With the BuildTak FlexPlate system you can now easily remove your 3D prints from the print bed!

The set consists of a flexible circuit board, a magnetic mounting plate and a sheet of the standard adhesive platform foil. All designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

In addition, mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface. Done!

The FlexPlate system is suitable for various 3D printers with a print bed surface of 235mm x 235mm and is produced in the United States.

TIP: To avoid printing problems, adjust the height of your Z-axis to compensate for the thickness of the new print bed.

Specifications

Brand:	BuildTak	Our item no:	DME00187
Dimensions:	235 x 235 mm	Type:	flexplate

€89.50

€72.76 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate system, 300mm x 300mm (3-pack)

Zoom in

Description The BuildTak FlexPlate system allows you to easily remove your 3D prints from the print bed!

The set consists of a flexible circuit board, a magnetic mounting plate and a sheet of the standard adhesive platform foil. All designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

Mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface. Done!

This variant of the FlexPlate system is only suitable for the Taz6, has a print bed surface of 300 x 300mm and is produced in the United States.

TIP: To avoid printing problems, adjust the height of your Z-axis to compensate for the thickness of the new print bed.

Specifications

Brand:	BuildTak	Our item no:	DME00188
Dimensions:	300 x 300 mm

€127.00

€103.25 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate system, 406mm x 406mm (3-pack)

Zoom in

Description The BuildTak FlexPlate allows you to easily remove your 3D prints from the print bed!

The set consists of a flexible circuit board, a magnetic mounting plate and a sheet of the standard adhesive platform foil. All designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

Mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface. Done!

The FlexPlate system is suitable for various 3D printers with a print bed surface of 406 x 406mm and is produced in the United States.

TIP: To avoid printing problems, adjust the height of your Z-axis to compensate for the thickness of the new print bed.

Specifications

Brand:	BuildTak	Our item no:	DME00190
Dimensions:	406 x 406 mm	Type:	flexplate

€183.00

€148.78 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate system, 600mm x 600mm (3-pack)

Zoom in

Description The BuildTak FlexPlate system allows you to easily remove your 3D prints from the print bed!

The set consists of a flexible circuit board, a magnetic mounting plate and a sheet of the standard adhesive platform foil. All designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

Mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface. Done!

The FlexPlate system is suitable for various 3D printers with a print bed surface of 600mm x 600mm and is produced in the United States.

TIP: To avoid printing problems, adjust the height of your Z-axis to compensate for the thickness of the new print bed.

Specifications

Brand:	BuildTak	Our item no:	DME00192
Dimensions:	600 x 600 mm	Type:	flexplate

€437.50

€355.69 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 114mm x 114mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 114mm x 114mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00210
Dimensions:	114 x 114 mm	Type:	default

€4.75

€3.86 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 220mm x 220mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 220mm x 220mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00202
Dimensions:	220 x 220 mm

€15.75

€12.80 Excl. 23% VAT

EU warehouse

BuildTak standard bonding platform foil, 235mm x 235mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 235mm x 235mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00203
Dimensions:	235 x 235 mm	Type:	default

€17.25

€14.02 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 300mm x 300mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed) and can be used several times. This variant is only suitable for the Taz6, has a surface of 300mm x 300mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00204
Dimensions:	300 x 300 mm

€25.50

€20.73 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 310mm x 320mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 310mm x 320mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00205
Dimensions:	310 x 320 mm	Type:	default

€30.50

€24.80 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 406mm x 406mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), reusable, has a surface of 406mm x 406mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00206
Dimensions:	406 x 406 mm	Type:	default

€46.50

€37.80 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 500mm x 500mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This bonding platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 500mm x 500mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00207
Dimensions:	500 x 500 mm	Type:	default

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€73.50 (coming soon)

€59.76 Excl. 23% VAT

BuildTak white standard foil bonding platform, 220mm x 220mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This white adhesive platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 220mm x 220mm and is produced in the United States.

Specifications

Brand:	BuildTak	Dimensions:	220 x 220 mm
Colour:	white	Our item no:	DME00214

€15.75

€12.80 Excl. 23% VAT

EU warehouse

BuildTak white standard foil bonding platform, 235mm x 235mm

Zoom in

Specifications

Brand:	BuildTak	Dimensions:	235 x 235 mm
Colour:	white	Our item no:	DME00215

€17.25

€14.02 Excl. 23% VAT

EU warehouse

BuildTak white standard foil bonding platform, 241mm x 254mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This white adhesive platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed) and can be used several times. This variant is suitable for the Prusa MK3, has a surface of 241mm x 254mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00221
Colour:	white	Type:	default
Dimensions:	241 x 254 mm

€18.25

€14.84 Excl. 23% VAT

EU warehouse

BuildTak white standard foil bonding platform, 300mm x 300mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high quality bonding platform film from BuildTak.

This white adhesive platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed) and can be used several times. This variant is only suitable for the Taz6, has a surface of 300mm x 300mm and is produced in the United States.

Specifications

Brand:	BuildTak	Dimensions:	300 x 300 mm
Colour:	white	Our item no:	DME00216

€25.50

€20.73 Excl. 23% VAT

EU warehouse

BuildTak white standard foil bonding platform, 310mm x 320mm

Zoom in

Specifications

Brand:	BuildTak	Our item no:	DME00217
Colour:	white	Type:	default
Dimensions:	310 x 320 mm

€30.50

€24.80 Excl. 23% VAT

EU warehouse

BuildTak white standard foil bonding platform, 406mm x 406mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This white adhesive platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), reusable, has a surface of 406mm x 406mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00218
Colour:	white	Type:	default
Dimensions:	406 x 406 mm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

BuildTak white standard foil bonding platform, 500mm x 500mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high quality bonding platform film from BuildTak.

This white adhesive platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 500mm x 500mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00219
Colour:	white	Type:	default
Dimensions:	500 x 500 mm

€73.50

€59.76 Excl. 23% VAT

EU warehouse

BuildTak standard bonding platform film, 600mm x 600mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This white adhesive platform features a special No-Cleanup adhesive, protects your print bed and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a surface of 600mm x 600mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00220
Colour:	white	Type:	default
Dimensions:	600 x 600 mm

€96.50

€78.46 Excl. 23% VAT

EU warehouse

BuildTak standard foil bonding platform, 203mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This round bonding platform features a special No-Cleanup adhesive, protects the print bed of your Delta printer and minimises the risk of warping or warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), reusable, has a diameter of 203mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00212
Diameter:	203 mm	Type:	default

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.75 (coming soon)

€10.37 Excl. 23% VAT

BuildTak standard foil bonding platform, 304mm

Zoom in

Description Improve the bed adhesion of your 3D print with this high-quality bonding platform film from BuildTak.

This round bonding platform features a special no-cleanup adhesive, protects the print bed of your Delta printer and minimises the risk of warping o r warping corners. The film is easy to apply and specially designed to optimise the bed adhesion of your 3D prints of PLA, ABS, HIPS, PET+, metal, wood and flexible filament. In addition, the foil also ensures that you can easily remove your print from the print bed.

The bonding platform is heat resistant (also suitable in combination with a heated bed), can be used several times, has a diameter of 304mm and is produced in the United States.

Specifications

Brand:	BuildTak	Our item no:	DME00213
Diameter:	304 mm	Type:	default

€25.50

€20.73 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate, 500mm x 500mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favorable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

This plate is suitable for various 3D printers with a print bed surface of 500mm x 500mm and produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications

Brand:	BuildTak	Our item no:	DME00199
Dimensions:	500 x 500 mm	Type:	flexplate

€89.50

€72.76 Excl. 23% VAT

EU warehouse

BuildTak FlexPlate, 260mm x 354mm

Zoom in

Description Do you regularly print with different materials and do you use the BuildTak FlexPlate system? Then this loose FlexPlate is a perfect addition!

Thanks to the FlexPlate's magnetic mounting system, you can easily switch the FlexPlate when changing the 3D filament type. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favorable conditions with good bed adhesion and without suffering from warping or warping corners. In addition, the FlexPlate is designed to make removing your print as easy as possible. All you need to do is bend the FlexPlate so that the print pops off on its own!

This FlexPlate is only suitable for the Ultimaker S5, has a print bed surface of 260mm x 354mm and is produced in the United States.

PLEASE NOTE: You only buy the FlexPlate and not the entire system. Click here to view our full BuildTak FlexPlate range.

Specifications