MK10 nozzles

€3.60

€7.50

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

MK10 compatible nozzle 0.40mm (123-3D brand)

Description This 0.4mm MK10 nozzle is suitable for the following 3D printers:

Makerbot MK10
FlashForge
Wanhao D4
Dremel 3D

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMK00006
Material:	Brass	Screw thread diameter:	7 mm
Nozzle coating:	none	Screwthread type:	M7

Nozzle diameter:

Order directly

€3.60

€7.50

Order now, we can ship this on Monday!

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

In stock

MK10 compatible nozzle 0.50mm (123-3D brand)

Description This 0.5mm MK10 nozzle is suitable for the following 3D printers:

Makerbot MK10
FlashForge
Wanhao D4
Dremel 3D

Specifications

Brand:	123-3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DMK00007
Material:	Brass	Screw thread diameter:	7 mm
Nozzle coating:	none	Screwthread type:	M7

Nozzle diameter:

Order directly

€3.60

€7.50

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

Nozzle MK10 extruder 0.6mm (123-3D brand)

Description This 0.6mm MK10 nozzle is suitable for the following 3D printers:

Makerbot MK10
FlashForge
Wanhao D4
Dremel 3D

Specifications

Brand:	123-3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMK00008
Material:	Brass	Screw thread diameter:	7 mm
Nozzle coating:	none	Screwthread type:	M7

Nozzle diameter:

Order directly

€3.60

€7.50

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

Nozzle MK10 extruder 0.8mm (123-3D brand)

Description This 0.8mm MK10 nozzle is suitable for the following 3D printers:

Makerbot MK10
FlashForge
Wanhao D4
Dremel 3D

Specifications

Brand:	123-3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMK00009
Material:	Brass	Screw thread diameter:	7 mm
Nozzle coating:	none	Screwthread type:	M7

Nozzle diameter:

Order directly

€3.60

€7.50

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

Nozzle MK10 extruder 1.00mm (123-3D brand)

Description This 1.0mm MK10 nozzle is suitable for the following 3D printers:

Makerbot MK10
FlashForge
Wanhao D4
Dremel 3D

Specifications

Brand:	123-3D	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DMK00010
Material:	Brass	Screw thread diameter:	7 mm
Nozzle coating:	none	Screwthread type:	M7

Nozzle diameter:

Order directly

€3.60

€7.50

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

Heatbreak MK10 compatible

Description This stainless steel heatbreak is suitable for most MK10 hot ends and works with a filament diameter of 1.75mm.

NB! The heatbreak is not fitted with a 4mm PTFE tube.

Specifications

Brand:	123-3D	Length :	26 mm
Filament diameter:	1.75 mm	Outer diameter:	8 mm
Inner diameter:	4 mm	Our item no:	DMK00012

Order directly

PTFE tube, 4 x 2 mm (per 10 cm)

€1.25

€14.00 (Incl. 23% VAT) (€11.38 Excl. 23% VAT)

EU warehouse

E3D Thermal Paste, 1 gram

Description Thermal paste improves the thermal transition from the warm to the cold part of the heatbreak. By using thermal paste, the risk of clogging (the softening of the filament in the heatbreak too early) is considerably reduced.

The composition of the paste is as follows: 50% silicone, 20% carbon, 30% metal oxide.

Specifications

Amount:	0.001 kg	Our item no:	DED00085
Brand:	E3D	Weight:	0.003 kg
Safety datasheet:	Safety Information

Order now, we can ship this on Monday!

€2.75 (Incl. 23% VAT) (€2.24 Excl. 23% VAT)

In stock

Black silicone sock for MK10 hotend

Description Keep your hot end clean and insulated with this MK10 silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Brand:	123-3D	Material:	Silicone
Colour:	black	Our item no:	DAR00087

€3.25 (Incl. 23% VAT) (€2.64 Excl. 23% VAT)

EU warehouse

Light blue silicone sock for MK10 hotend

Description Keep your hot end clean and insulated with this MK10 silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Brand:	123-3D	Material:	Silicone
Colour:	light blue	Our item no:	DAR00088

€3.25 (Incl. 23% VAT) (€2.64 Excl. 23% VAT)

EU warehouse

Capricorn XS heat break liner, 2mm x 3mm (300mm)

Description The Capricorn XS heat break liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heat breaks.

Specifications

Brand:	Capricorn	Length:	30 cm
Colour:	dark blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	3 mm
Inner diameter:	2 mm	Our item no:	DBW00066

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50 (coming soon) (Incl. 23% VAT) (€10.16 Excl. 23% VAT)

Micro Swiss A2 hard steel nozzle for MK10 all metal hot end Kit, 1.75mm x 0.4mm

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following part:
	●	Micro Swiss MK10 All Metal Hot end

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Material:	Steel	Our item no:	DMS00000

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€21.00 (Incl. 23% VAT) (€17.07 Excl. 23% VAT)

EU warehouse

Micro Swiss A2 hard steel nozzle for MK10 all metal hot end kit, 1.75mm x 0.6mm

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following part:
	●	Micro Swiss MK10 all metal hot end

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Material:	Steel	Our item no:	DMS00002

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€21.00 (Incl. 23% VAT) (€17.07 Excl. 23% VAT)

EU warehouse

Micro Swiss A2 hard steel nozzle for MK10 All Metal Hotend Kit, 1.75mm x 0.80mm

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following part:
		Micro Swiss MK10 All Metal Hotend

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.8 mm
Material:	Steel	Our item no:	DMS00112

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€21.00 (Incl. 23% VAT) (€17.07 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 0.2mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following part:
	●	Only suitable for Micro Swiss MK10 full metal hot end

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.2 mm
Material:	Brass	Our item no:	DMS00076

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | PTFE lined hotend | 1.75mm x 0.20mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following printers:
	FlashForge Creator Pro	Dremel Idea Builder
	FlashForge Creator X	Dremel 3D40 Idea Builder
	Flash Forge Dreamer	PowerSpec 3D Pro
	FlashForge Finder	PowerSpec 3D X
	Monoprice Maker Select v2	Wanhao Duplicator 4S
	Monoprice Maker Select Plus	Wanhao Duplicator 4X
	Qidi Tech X-One	Wanhao i3
	Qidi Tech I	QIDI X Plus
	Cocoon Create 3D Printer	QIDI X-MAX

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DMS00030
Material:	Brass	Screwthread type:	M7
Nozzle coating:	twinclad XT

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€19.50 (coming soon) (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

Micro Swiss brass coated nozzle for MK10 | PTFE lined hotend | 1.75mm x 0.30mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.3mm.

Compatible with the following printers:
	FlashForge Creator Pro	Dremel Idea Builder
	FlashForge Creator X	Dremel 3D40 Idea Builder
	Flash Forge Dreamer	PowerSpec 3D Pro
	FlashForge Finder	PowerSpec 3D X
	Monoprice Maker Select v2	Wanhao Duplicator 4S
	Monoprice Maker Select Plus	Wanhao Duplicator 4X
	Qidi Tech X-One	Wanhao i3
	Qidi Tech I	QIDI X Plus
	Cocoon Create 3D Printer	QIDI X-MAX

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DMS00031
Material:	Brass	Screwthread type:	M7
Nozzle coating:	twinclad XT

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | PTFE lined hotend | 1.75mm x 0.40mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	FlashForge Creator Pro	Dremel Idea Builder
	FlashForge Creator X	Dremel 3D40 Idea Builder
	Flash Forge Dreamer	PowerSpec 3D Pro
	FlashForge Finder	PowerSpec 3D X
	Monoprice Maker Select v2	Wanhao Duplicator 4S
	Monoprice Maker Select Plus	Wanhao Duplicator 4X
	Qidi Tech X-One	Wanhao i3
	Qidi Tech I	QIDI X Plus
	Cocoon Create 3D Printer	QIDI X-MAX

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00032
Material:	Brass	Screwthread type:	M7
Nozzle coating:	twinclad XT

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | PTFE lined hotend | 1.75mm x 0.50mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.5mm.

Compatible with the following printers:
	FlashForge Creator Pro	Dremel Idea Builder
	FlashForge Creator X	Dremel 3D40 Idea Builder
	Flash Forge Dreamer	PowerSpec 3D Pro
	FlashForge Finder	PowerSpec 3D X
	Monoprice Maker Select v2	Wanhao Duplicator 4S
	Monoprice Maker Select Plus	Wanhao Duplicator 4X
	Qidi Tech X-One	Wanhao i3
	Qidi Tech I	QIDI X Plus
	Cocoon Create 3D Printer	QIDI X-MAX

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DMS00033
Material:	Brass	Screwthread type:	M7
Nozzle coating:	twinclad XT

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | PTFE lined hotend | 1.75mm x 0.60mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	FlashForge Creator Pro	Dremel Idea Builder
	FlashForge Creator X	Dremel 3D40 Idea Builder
	Flash Forge Dreamer	PowerSpec 3D Pro
	FlashForge Finder	PowerSpec 3D X
	Monoprice Maker Select v2	Wanhao Duplicator 4S
	Monoprice Maker Select Plus	Wanhao Duplicator 4X
	Qidi Tech X-One	Wanhao i3
	Qidi Tech I	QIDI X Plus
	Cocoon Create 3D Printer	QIDI X-MAX

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMS00034
Material:	Brass	Screwthread type:	M7
Nozzle coating:	twinclad XT

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 0.3mm

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.3mm.

Compatible with the following part:
	●	Only suitable for Micro Swiss MK10 full metal hot end

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.3 mm
Material:	Brass	Our item no:	DMS00077

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 0.4mm

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following part:
	●	Only suitable for Micro Swiss MK10 full metal hot end

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Material:	Brass	Our item no:	DMS00078

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 0.50mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.5mm.

Compatible with the following part:

Only suitable for Micro Swiss MK10 All Metal Hotend

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.5 mm
Material:	Brass	Our item no:	DMS00079

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 0.60mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following part:

Only suitable for Micro Swiss MK10 All Metal Hotend

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Material:	Brass	Our item no:	DMS00080

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 0.80mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following part:

Only suitable for Micro Swiss MK10 All Metal Hotend

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	0.8 mm
Material:	Brass	Our item no:	DMS00081

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 1.00mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.0mm.

Compatible with the following part:

Only suitable for Micro Swiss MK10 All Metal Hotend

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	1 mm
Material:	Brass	Our item no:	DMS00082

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for MK10 | All Metal Hotend kit | 1.75mm x 1.20mm

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.2mm.

Compatible with the sollowing part:

Only suitable or Micro Swiss MK10 All Metal Hotend

Specifications

Brand:	Micro Swiss	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Nozzle diameter:	1.2 mm
Material:	Brass	Our item no:	DMS00083

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Oscar3D MK10 ruby nozzle, 2.85mm x 0.40mm

Description This Oscar3D MK10 ruby 2.85 x 0.40mm nozzle is ideal for intensive printer use. The core of the nozzle is ruby ground with a tolerance of ±10 micrometers. The hardness of the ruby makes the nozzle ideal for using materials that would quickly wear down ordinary nozzles. These can be materials such as carbon fibre or metals.

Using a ruby ensures a more constant temperature and more even temperature distribution. This reduces the chance of blockages. The Oscar3D MK10 is also equipped with an M6 brass screw thread with a length of 5mm.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00784
Material:	Brass + red ruby	Screw thread diameter:	7 mm
Nozzle coating:	none	Screwthread type:	M7

€81.00 (Incl. 23% VAT) (€65.85 Excl. 23% VAT)

EU warehouse

Baco adjustable spanner, 200mm

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Brand:	123-3D	Our item no:	DGS00060
Dimensions:	20 cm

Order now, we can ship this on Monday!

€8.25 (Incl. 23% VAT) (€6.71 Excl. 23% VAT)

In stock

Hot end copper cleaning brush

Description This cleaning brush has copper bristles and is ideal for cleaning the hot end of your 3D printer.

CAUTION: To avoid short circuits, turn off your 3D printer completely before use.

Specifications

Brand:	123-3D	Material:	Copper
Colour:	black	Our item no:	DGS00072
Length:	170 mm	Width:	12 mm

Order now, we can ship this on Monday!

€3.95 (Incl. 23% VAT) (€3.21 Excl. 23% VAT)

In stock

Metal needle, 0.15mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.15mm and is suitable for a nozzle of 0.15mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00091
Diameter:	0.15 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle, 0.20mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.20mm and is suitable for a nozzle of 0.20mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00092
Diameter:	0.2 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle, 0.25mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.25mm and is suitable for a nozzle of 0.25mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00093
Diameter:	0.25 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle, 0.30mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.30mm and is suitable for a nozzle of 0.30mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00094
Diameter:	0.3 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle, 0.35mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.35mm and is suitable for a nozzle of 0.35mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00095
Diameter:	0.35 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle, 0.40mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.40mm and is suitable for a nozzle of 0.40mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00096
Diameter:	0.4 mm

Diameter:

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

EU warehouse

Metal needle 0.50mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.50mm and is suitable for a nozzle of 0.50mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00097
Diameter:	0.5 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle 0.60mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.60mm and is suitable for a nozzle of 0.60mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00098
Diameter:	0.6 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle 0.80mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.80mm and is suitable for a nozzle of 0.80mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00099
Diameter:	0.8 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Metal needle 1.00mm (5-pack)

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 1mm and is suitable for a nozzle of 1mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00100
Diameter:	1 mm

Diameter:

Order now, we can ship this on Monday!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

Ratchet with caps 1/4' nozzle tool

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Brand:

123-3D

Our item no:

DGS00059

Order now, we can ship this on Monday!

€18.50 (Incl. 23% VAT) (€15.04 Excl. 23% VAT)

In stock

Solid carbide drill bits, 0.1mm-1mm