Nozzles revo

E3D Revo brass nozzle 1.75mm, 0.15mm DAR00856

Description This pink E3D Revo brass nozzle has a diameter of 0.15mm and works with 1.75mm filament from the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature and change it without using additional tools.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	pink	Nozzle diameter:	0.15 mm
Diameter:	13 mm	Our item no:	DAR00856
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Revo brass nozzle 1.75mm, 0.25mm

Zoom in

Description With this E3D brass nozzle with a diameter of 0.25mm (yellow) for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	yellow	Nozzle diameter:	0.25 mm
Diameter:	13 mm	Our item no:	DED00324
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this on Monday!

€26.00

€21.14 Excl. 23% VAT

In stock

E3D Revo brass nozzle 1.75mm, 0.40mm

Zoom in

Description With this red E3D brass nozzle with a diameter of 0.4mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change it without using additional tools.

The E3D Revo nozzle is equipped with its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	red	Nozzle diameter:	0.4 mm
Diameter:	13 mm	Our item no:	DED00325
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this on Monday!

€26.00

€21.14 Excl. 23% VAT

In stock

E3D Revo brass nozzle 1.75mm, 0.60mm

Zoom in

Description With this blue E3D brass nozzle with a diameter of 0.6mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	blue	Nozzle diameter:	0.6 mm
Diameter:	13 mm	Our item no:	DED00326
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D Revo brass nozzle 1.75mm, 0.80mm

Zoom in

Description With this green E3D brass nozzle with a diameter of 0.8mm for 1.75mm filament from the E3D RapidChange Revo system, you can quickly and easily adjust your nozzle diameter at room temperature. You can change them without using additional tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Nozzle coating:	none
Colour:	green	Nozzle diameter:	0.8 mm
Diameter:	13 mm	Our item no:	DED00327
Filament diameter:	1.75 mm	Quantity:	1
Length:	41 mm	Screwthread type:	Revo
Material:	Brass

Nozzle diameter:

Order now, we can ship this on Monday!

€26.00

€21.14 Excl. 23% VAT

In stock

E3D Revo brass nozzle kit | 1.75mm | 0.40mm (3-pack)

Zoom in

Description This E3D brass nozzle set contains 3 Revo nozzles with a diameter of 0.4mm in red. They are suitable for 1.75mm filament and the E3D RapidChange Revo system. You can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Material:	Brass
Colour:	red	Nozzle diameter:	0.4 mm
Diameter:	13 mm	Our item no:	DED00322
Filament diameter:	1.75 mm	Quantity:	3 Quantity
Length:	41 mm

€68.00

€55.28 Excl. 23% VAT

EU warehouse

E3D Revo brass nozzle kit | 1.75mm| 0.25/0.60/0.80mm (3-pack)

Zoom in

Description With this E3D Revo nozzle pack you'll receive 3 Revo nozzles, with the diameters 0.25mm (yellow), 0.6mm (blue) and 0.8mm (green).

These brass nozzles for 1.75mm filament are suitable for the E3D RapidChange Revo system. With this system you can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.

Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Specifications

Brand:	E3D	Material:	Brass
Diameter:	13 mm	Our item no:	DED00323
Filament diameter:	1.75 mm	Quantity:	3
Length:	41 mm

€68.00

€55.28 Excl. 23% VAT

EU warehouse

E3D Revo ObXidian nozzle 1.75mm, 0.25mm

Zoom in

Description Print fine details and complex shapes with the E3D Revo Obxidian nozzle. The interchangeable nozzle features the new E3DLC coating. This minimises the accumulation of plastic around the nozzle. The integrated heat break prevents incorrect assembly and a leaking hot end. The size is clearly indicated on the nozzle. This size nozzle is also provided with an individual colour, making it easy to recognise.

Specifications

Brand:	E3D	Nozzle coating:	E3DLC
Colour:	yellow	Nozzle diameter:	0.25 mm
Filament diameter:	1.75 mm	Our item no:	DAR00935
Material:	ObXidian Steel	Screwthread type:	Revo

Nozzle diameter:

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D Revo Obxidian nozzle, 1.75mm x 0.40mm

Zoom in

Specifications

Brand:	E3D	Nozzle coating:	E3DLC
Colour:	red	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00912
Material:	ObXidian Steel	Screwthread type:	Revo

Nozzle diameter:

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D Revo Obxidian nozzle, 1.75mm x 0.60mm

Zoom in

Specifications

Brand:	E3D	Nozzle coating:	E3DLC
Colour:	blue	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00913
Material:	ObXidian Steel	Screwthread type:	Revo

Nozzle diameter:

Order now, we can ship this on Monday!

€71.00

€57.72 Excl. 23% VAT

In stock

E3D Revo ObXidian nozzle 1.75mm, 0.80mm

Zoom in

Specifications

Brand:	E3D	Nozzle coating:	E3DLC
Colour:	green	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00936
Material:	ObXidian Steel	Screwthread type:	Revo

Nozzle diameter:

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D Revo silicone sock kit (10-pack, 2 per size)

Zoom in

Description Keep your E3D Revo hot end insulated with these silicone socks. By using the sock you can keep the heater block clean and free of melted pieces of plastic.

It also reduces heat loss and improves print quality, especially when using a cooling fan.

Specifications

Brand:	E3D	Our item no:	DED00328
Material:	Silicone	Quantity:	10

Order now, we can ship this on Monday!

€6.75

€5.49 Excl. 23% VAT

In stock

E3D Revo Belt nozzle, 1.75mm x 0.40mm

Zoom in

Description The E3D Revo Belt nozzle 1.75mm x 0.40mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	red	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	46.5 mm	Our item no:	DAR01168
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€39.50

(coming soon)

€32.11 Excl. 23% VAT

E3D Revo High Flow nozzle, 1.75mm x 0.40mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.40mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	red	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	41.1 mm	Our item no:	DAR01171
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 0.60mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.60mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	blue	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	41.1 mm	Our item no:	DAR01172
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 0.80mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 0.80mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	green	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.8 mm
Dimensions:	41.1 mm	Our item no:	DAR01173
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 1.00mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.00mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	black	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	1 mm
Dimensions:	41.1 mm	Our item no:	DAR01174
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 1.20mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.20mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	purple	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	1.2 mm
Dimensions:	41.1 mm	Our item no:	DAR01175
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 1.40mm

Zoom in

Description With the E3D Revo High Flow 1.75mm x 1.40mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	orange	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	1.4 mm
Dimensions:	41.1 mm	Our item no:	DAR01176
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow ObXidian nozzle, 1.75mm x 0.40mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.4mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01768
Material:	Copper & Hardened Steel with E3DLC coating	Voltage:	24 v
Max temp:	300 °C

Nozzle diameter:

€76.50

€62.20 Excl. 23% VAT

EU warehouse

E3D Revo High Flow ObXidian nozzle, 1.75mm x 0.60mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.6mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR01769
Material:	Copper & Hardened Steel with E3DLC coating	Voltage:	24 v
Max temp:	300 °C

Nozzle diameter:

€76.50

€62.20 Excl. 23% VAT

EU warehouse

E3D Revo High Flow ObXidian nozzle, 1.75mm x 0.80mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 0.8mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR01770
Material:	Copper & Hardened Steel with E3DLC coating	Voltage:	24 v
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50

(coming soon)

€62.20 Excl. 23% VAT

E3D Revo High Flow ObXidian nozzle, 1.75mm x 1.0mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.0mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR01771
Material:	Copper & Hardened Steel with E3DLC coating	Voltage:	24 v
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50

(coming soon)

€62.20 Excl. 23% VAT

E3D Revo High Flow ObXidian nozzle, 1.75mm x 1.20mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.2mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR01772
Material:	Copper & Hardened Steel with E3DLC coating	Voltage:	24 v
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€76.50

(coming soon)

€62.20 Excl. 23% VAT

E3D Revo High Flow ObXidian nozzle, 1.75mm x 1.40mm

Zoom in

Description Improve your flow rate with the Revo ObXidian High Flow nozzle. The nozzle has a unique internal geometry, which results in improved heat conduction. You can easily change the nozzle, so you can quickly continue 3D printing. The product comes complete with a nozzle and heatbreak and the nozzle size is easily recognisable by the coloured silicone band. In addition, the size is engraved in the nozzle. This nozzle has a diameter of 1.4mm, is suitable for 1.75mm filament and can handle a maximum temperature of 300˚C.

Specifications

Brand:	E3D	Nozzle diameter:	1.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01773
Material:	Copper & Hardened Steel with E3DLC coating	Voltage:	24 v
Max temp:	300 °C

Nozzle diameter:

€76.50

€62.20 Excl. 23% VAT

EU warehouse

Baco adjustable spanner, 200mm

Zoom in

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Brand:	123-3D	Our item no:	DGS00060
Dimensions:	20 cm

Order now, we can ship this on Monday!

€8.25

€6.71 Excl. 23% VAT

In stock

Hot end copper cleaning brush

Zoom in

Description This cleaning brush has copper bristles and is ideal for cleaning the hot end of your 3D printer.

CAUTION: To avoid short circuits, turn off your 3D printer completely before use.

Specifications

Brand:	123-3D	Material:	Copper
Colour:	black	Our item no:	DGS00072
Length:	170 mm	Width:	12 mm

Order now, we can ship this on Monday!

€3.95

€3.21 Excl. 23% VAT

In stock

Metal needle, 0.15mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.15mm and is suitable for a nozzle of 0.15mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00091
Diameter:	0.15 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.20mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.20mm and is suitable for a nozzle of 0.20mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00092
Diameter:	0.2 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.25mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.25mm and is suitable for a nozzle of 0.25mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00093
Diameter:	0.25 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.30mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.30mm and is suitable for a nozzle of 0.30mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00094
Diameter:	0.3 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.35mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.35mm and is suitable for a nozzle of 0.35mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00095
Diameter:	0.35 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.40mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.40mm and is suitable for a nozzle of 0.40mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00096
Diameter:	0.4 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.50mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.50mm and is suitable for a nozzle of 0.50mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00097
Diameter:	0.5 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.60mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.60mm and is suitable for a nozzle of 0.60mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00098
Diameter:	0.6 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.80mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.80mm and is suitable for a nozzle of 0.80mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00099
Diameter:	0.8 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 1.00mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 1mm and is suitable for a nozzle of 1mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00100
Diameter:	1 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Ratchet with caps 1/4' nozzle tool

Zoom in

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Brand:

123-3D

Our item no:

DGS00059

Order now, we can ship this on Monday!