1.75mm

Description This nozzle is suitable for an E3D hotend and with a medium opening of 0.40mm ensures smooth and precise printing of layers. This nozzle (marking #3) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00012
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€6.75

€5.49 Excl. 23% VAT

In stock

E3D V6 brass nozzle, 1.75mm x 0.25mm

Zoom in

Description This nozzle is suitable for an E3D hot end and ensures very precise results with a small opening of 0.25mm. This nozzle (marking #0) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.25 mm
Filament diameter:	1.75 mm	Our item no:	DED00009
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€12.50

€10.16 Excl. 23% VAT

In stock

E3D v6 brass nozzle, 1.75mm x 0.30mm

Zoom in

Description This nozzle is suitable for an E3D hotend and ensures very precise results with a small opening of 0.30mm. This nozzle (marking # 1) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DED00010
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D v6 brass nozzle, 1.75 x 0.50mm

Zoom in

Description This nozzle is suitable for an E3D hotend and with a medium opening of 0.50mm ensures smooth and precise printing of layers. This nozzle (marking # 6) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DED00084
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€6.75

€5.49 Excl. 23% VAT

In stock

E3D v6 brass nozzle, 1.75mm x 0.60mm

Zoom in

Description This nozzle is suitable for an E3D hotend and with a fairly large opening of 0.60mm ensures smooth printing of medium-sized layers. This nozzle (marking #4) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DED00013
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€6.75

€5.49 Excl. 23% VAT

EU warehouse

E3D v6 brass nozzle, 1.75mm x 0.80mm

Zoom in

Description This nozzle is suitable for an E3D hotend and with a large opening of 0.80mm ensures smooth printing of larger layers. This nozzle (marking #5) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DED00014
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€6.75

€5.49 Excl. 23% VAT

In stock

M6 brass nozzle, 0.20mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.2mm. The nozzle is made of brass and suitable for 1.75 mm filament. The nozzle size is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DMK00013
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

M6 brass nozzle, 0.30mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.3mm. The nozzle is made of brass and suitable for 1.75mm filament. The nozzle size is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DMK00014
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

M6 brass nozzle, 0.40mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.4mm. The nozzle is made of brass and suitable for 1.75mm filament. The size of the nozzle is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMK00015
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€5.00

€4.07 Excl. 23% VAT

In stock

M6 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.5mm. The nozzle is made of brass and suitable for 1.75mm filament. The size of the nozzle is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DMK00016
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€5.00

€4.07 Excl. 23% VAT

EU warehouse

M6 brass nozzle, 0.60mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.6mm. The nozzle is made of brass and suitable for 1.75mm filament. The nozzle size is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMK00017
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€5.00

€4.07 Excl. 23% VAT

EU warehouse

M6 brass nozzle, 0.80mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.8mm. The nozzle is made of brass and suitable for 1.75mm filament. The size of the nozzle is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMK00018
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€5.00

€4.07 Excl. 23% VAT

In stock

E3D V6 nozzle fun pack, 1.75mm

Zoom in

Description This fun pack of original ED3 nozzles (1.75mm) are suitable for the E3D-V6 hot end series. The fun pack contains 6 nozzles and an E3D nozzle key. The nozzles are suitable for 1.75mm filament and have a marking that corresponds to the nozzle opening.

The set contains the following diameters:
0.25mm (marking #0)
0.30 mm (marking #1)
0.35mm (marking #2)
0.50mm (marking #6)
0.60 mm (marking #4)
0.80mm (marking #5)

NB!
The nozzles in this set will not fit the E3D Cyclops and Volcano hot ends.

Specifications

Brand:	E3D	Material:	Brass
Filament diameter:	1.75 mm	Our item no:	DED00144

€37.50

€30.49 Excl. 23% VAT

EU warehouse

E3D V6 nozzle pro pack, 1.75mm

Zoom in

Description This pro pack of original ED3 nozzles (1.75mm) are suitable for the E3D-V6 hot end series.
The pro pack contains 6 nozzles and an E3D nozzle wrench. The nozzles are suitable for 1.75mm filament and have a marking that corresponds to the nozzle opening.

The set contains the following nozzle types:
Brass 0.15mm (marking #2 diagonal)
Brass 0.80mm (marking #5)
Copper 0.25mm (marking #0)
Copper 0.40mm (marking #3)
Hardened Steel 0.40mm (marking #3)
Hardened Steel 0.60mm (marking #4)

NB!
The nozzles in this set will not fit the E3D Cyclops and Volcano hot ends.

Specifications

Brand:	E3D	Our item no:	DED00145
Filament diameter:	1.75 mm	Screwthread type:	M6

Order now, we can ship this on Monday!

€87.00

€70.73 Excl. 23% VAT

In stock

E3D nozzle wrench, 7mm

Zoom in

Description Use this wrench to carefully attach your E3D nozzle.

Specifications

Brand:	E3D	Our item no:	DED00053
Material:	Steel

Order now, we can ship this on Monday!

€2.75

€2.24 Excl. 23% VAT

In stock

Baco adjustable spanner, 200mm

Zoom in

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Brand:	123-3D	Our item no:	DGS00060
Dimensions:	20 cm

Order now, we can ship this on Monday!

€8.25

€6.71 Excl. 23% VAT

In stock

E3D V6 silicone sock pro for hot ends (3-pack)

Zoom in

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Brand:	E3D	Our item no:	DED00072
Colour:	blue

Order now, we can ship this on Monday!

€6.00

€4.88 Excl. 23% VAT

In stock

Hot end copper cleaning brush

Zoom in

Description This cleaning brush has copper bristles and is ideal for cleaning the hot end of your 3D printer.

CAUTION: To avoid short circuits, turn off your 3D printer completely before use.

Specifications

Brand:	123-3D	Material:	Copper
Colour:	black	Our item no:	DGS00072
Length:	170 mm	Width:	12 mm

Order now, we can ship this on Monday!

€3.95

€3.21 Excl. 23% VAT

In stock

Metal needle, 0.15mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.15mm and is suitable for a nozzle of 0.15mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00091
Diameter:	0.15 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Black silicone sock for MK8 hotend

Zoom in

Description Keep your hot end clean and insulated with this MK8 silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Brand:	123-3D	Material:	Silicone
Colour:	black	Our item no:	DAR00089

Order now, we can ship this on Monday!

€3.25

€2.64 Excl. 23% VAT

In stock

Metal needle, 0.20mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.20mm and is suitable for a nozzle of 0.20mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00092
Diameter:	0.2 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Blue silicone sock for MK8 hotend

Zoom in

Description Keep your hot end clean and insulated with this MK8 silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Brand:	123-3D	Material:	Silicone
Colour:	blue	Our item no:	DAR00090

€3.25

€2.64 Excl. 23% VAT

EU warehouse

Metal needle, 0.25mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.25mm and is suitable for a nozzle of 0.25mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00093
Diameter:	0.25 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.30mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.30mm and is suitable for a nozzle of 0.30mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00094
Diameter:	0.3 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.35mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.35mm and is suitable for a nozzle of 0.35mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00095
Diameter:	0.35 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.40mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.40mm and is suitable for a nozzle of 0.40mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00096
Diameter:	0.4 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.50mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.50mm and is suitable for a nozzle of 0.50mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00097
Diameter:	0.5 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.60mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.60mm and is suitable for a nozzle of 0.60mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00098
Diameter:	0.6 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.80mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.80mm and is suitable for a nozzle of 0.80mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00099
Diameter:	0.8 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 1.00mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 1mm and is suitable for a nozzle of 1mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00100
Diameter:	1 mm

Diameter:

Order now, we can ship this on Monday!

€4.75

€3.86 Excl. 23% VAT

In stock

Ratchet with caps 1/4' nozzle tool

Zoom in

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Brand:

123-3D

Our item no:

DGS00059

Order now, we can ship this on Monday!