Buy 3D printers, filament, parts & tools | lowest prices

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DBO00076
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.5mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DBO00095
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm

Zoom in

Description

This brass Bondtech CHT M6 nozzle has a nickel coating and is highly resistant to corrosion. The nozzle also produces less friction so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts and flows faster.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DBO00071
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this tomorrow!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DBO00072
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00 (coming soon)

€17.07 Excl. 23% VAT

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.0mm and is suitable for filament with a diameter of 175 mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DBO00073
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1.4 mm
Filament diameter:	1.75 mm	Our item no:	DBO00074
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.8mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1.8 mm
Filament diameter:	1.75 mm	Our item no:	DBO00075
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00078
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.4 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00079
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.6 mm

Nozzle diameter:

Order now, we can ship this tomorrow!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00080
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.8 mm

Nozzle diameter:

Order now, we can ship this tomorrow!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00081
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00082
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1.4 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1. mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00083
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1.8 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm (5-pack)

Zoom in

Description The Bondtech CHT Volcano nozzle has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved. This is a 5-pack.

Specifications

Brand:	Bondtech	Nozzle coating:	nickel plated
Filament diameter:	1.75 mm	Our item no:	DAR00875
Material:	Brass	Screwthread type:	M6

€113.00

€91.87 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.40mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00851
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.60mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.60mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00852
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.80mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.80mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00853
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.00 (coming soon)

€21.14 Excl. 23% VAT

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.00mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00854
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.20mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.20mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR00855
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00946
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this tomorrow!

€55.00

€44.72 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00947
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00

€44.72 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00948
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this tomorrow!

€55.00

€44.72 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00949
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00

€44.72 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Our item no:	DAR00959
Filament diameter:	1.75 mm	Quantity:	4
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€193.00

€156.91 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00950
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00951
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this tomorrow!

€48.00

€39.02 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00952
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00953
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm (4-pack)

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on the hardware used, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Our item no:	DAR00958
Filament diameter:	1.75 mm	Quantity:	4
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€183.00

€148.78 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00954
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal MK8 coated nozzle 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00955
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00956
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00957
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal coated brass nozzle MK8, 1.75mm (4-pack)

Zoom in

Description The Bondtech CHT® BiMetal MK8 Coated Nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your MK8 heat block by 25 to 65%. This depends on the hardware used, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
bq Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
Creality Ender 2
Creality Ender 3 Pro
Creality Ender 5
Creality CR-20 Pro
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Craft bot family
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DAR00960
Material:	Copper	Quantity:	4
Nozzle coating:	nickel plated	Screwthread type:	M6

€183.00

€148.78 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.40mm

Zoom in

Description Increase the quality of your prints with the CHT Spider Coated Brass Nozzle from Bondtech. This nozzle provides more melting capacity, allowing you to print faster and save time. You can also make stronger prints due to the improved layer adhesion. The CHT Spider nozzle is compatible with the Creality Spider hotend (V1) and can be used with many different filaments, including PLA, TPU, Nylon and HIPS. The nozzle size is 0.40mm and is suitable for 1.75mm filament.

Specifications

Brand:	Bondtech	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01372
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.4 mm

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.60mm

Zoom in

Description Increase the quality of your prints with the CHT Spider Coated Brass Nozzle from Bondtech. This nozzle provides more melting capacity, allowing you to print faster and save time. You can also make stronger prints due to the improved layer adhesion. The CHT Spider nozzle is compatible with the Creality Spider hotend (V1) and can be used with many different filaments, including PLA, TPU, Nylon and HIPS. The nozzle size is 0.60mm and is suitable for 1.75mm filament.

Specifications

Brand:	Bondtech	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01373
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.6 mm

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.80mm

Zoom in

Description Increase the quality of your prints with the CHT Spider Coated Brass Nozzle from Bondtech. This nozzle provides more melting capacity, allowing you to print faster and save time. You can also make stronger prints due to the improved layer adhesion. The CHT Spider nozzle is compatible with the Creality Spider hotend (V1) and can be used with many different filaments, including PLA, TPU, Nylon and HIPS. The nozzle size is 0.80mm and is suitable for 1.75mm filament.

Specifications

Brand:	Bondtech	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01374
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.8 mm

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 1.00mm

Zoom in

Description Increase the quality of your prints with the CHT Spider Coated Brass Nozzle from Bondtech. This nozzle provides more melting capacity, allowing you to print faster and save time. You can also make stronger prints due to the improved layer adhesion. The CHT Spider nozzle is compatible with the Creality Spider hotend (V1) and can be used with many different filaments, including PLA, TPU, Nylon and HIPS. The nozzle size is 1.00mm and is suitable for 1.75mm filament.

Specifications

Brand:	Bondtech	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01375
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1 mm

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated copper nozzle FIN, 0.2mm

Zoom in

Description Achieve razor-sharp detail and higher throughput with this high-quality 0.2mm nozzle. Designed for the Slice Engineering Mako hotend with FIN connection.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR02216
Material:	Coated copper

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Bondtech CHT® coated copper nozzle FIN, 0.4mm

Zoom in

Description Achieve razor-sharp detail and higher throughput with this high-quality 0.4mm nozzle. Designed for the Slice Engineering Mako hotend with FIN connection.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02217
Material:	Coated copper

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Bondtech CHT® coated copper nozzle FIN, 0.6mm

Zoom in

Description Achieve razor-sharp detail and higher throughput with this high-quality 0.6mm nozzle. Designed for the Slice Engineering Mako hotend with FIN connection.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR02218
Material:	Coated copper

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Bondtech CHT® coated copper nozzle FIN, 0.8mm

Zoom in

Description Achieve razor-sharp detail and higher throughput with this high-quality 0.8mm nozzle. Designed for the Slice Engineering Mako hotend with FIN connection.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR02219
Material:	Coated copper

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Baco adjustable spanner, 200mm

Zoom in

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Brand:	123-3D	Our item no:	DGS00060
Dimensions:	20 cm

Order now, we can ship this tomorrow!

€8.25

€6.71 Excl. 23% VAT

In stock

Hot end copper cleaning brush

Zoom in

Description This cleaning brush has copper bristles and is ideal for cleaning the hot end of your 3D printer.

CAUTION: To avoid short circuits, turn off your 3D printer completely before use.

Specifications

Brand:	123-3D	Material:	Copper
Colour:	black	Our item no:	DGS00072
Length:	170 mm	Width:	12 mm

Order now, we can ship this tomorrow!

€3.95

€3.21 Excl. 23% VAT

In stock

Metal needle, 0.15mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.15mm and is suitable for a nozzle of 0.15mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00091
Diameter:	0.15 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.20mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.20mm and is suitable for a nozzle of 0.20mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00092
Diameter:	0.2 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.25mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.25mm and is suitable for a nozzle of 0.25mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00093
Diameter:	0.25 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.30mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.30mm and is suitable for a nozzle of 0.30mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00094
Diameter:	0.3 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.35mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.35mm and is suitable for a nozzle of 0.35mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00095
Diameter:	0.35 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle, 0.40mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.40mm and is suitable for a nozzle of 0.40mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00096
Diameter:	0.4 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.50mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.50mm and is suitable for a nozzle of 0.50mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00097
Diameter:	0.5 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.60mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.60mm and is suitable for a nozzle of 0.60mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and gets hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00098
Diameter:	0.6 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 0.80mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 0.80mm and is suitable for a nozzle of 0.80mm or larger. The needle has a thicker part so you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00099
Diameter:	0.8 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Metal needle 1.00mm (5-pack)

Zoom in

Description With this handy needle you can easily fix a clogged 3D printer nozzle. The needle has a diameter of 1mm and is suitable for a nozzle of 1mm or larger. The needle has a thicker part to which you can easily hold it.

Note: the needle has a sharp point and will become hot if you leave it in the nozzle for too long.

Specifications

Brand:	123-3D	Our item no:	DGS00100
Diameter:	1 mm

Diameter:

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Ratchet with caps 1/4' nozzle tool

Zoom in

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Brand:

123-3D

Our item no:

DGS00059

Order now, we can ship this tomorrow!

€18.50

€15.04 Excl. 23% VAT

In stock

Solid carbide drill bits, 0.1mm-1mm

Zoom in

Description This 10-piece solid carbide drill set is ideal for precision jobs!

Use this set to drill tiny holes (with a diameter of 0.1mm to 1mm) in various materials such as copper, brass, wood, printed circuit boards and many plastics. In addition, you can also use the drills to unclog the nozzle of your printer head/extruder.

The drill bits have a pitch of 0.1mm and a shank diameter of 3.175mm.

Specifications

Brand:	123-3D	Our item no:	DGS00047
Material:	Steel

Order now, we can ship this tomorrow!

€8.25

€6.71 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

Customer reviews

Payment options

Follow us on social media

Official dealer

Bondtech

Popular products