Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Micro Swiss Kits

Micro Swiss All Metal Hotend Kit for Wanhao Duplicator 6

Micro Swiss All Metal Hotend Kit for Wanhao Duplicator 6 DMS00017

Description

This all-metal hot-end set from Micro Swiss for the Wanhao Duplicator 6 is the perfect upgrade for your 3D printer. The set has several improvements:

Slot clamp system
No adjusting screw that can damage the heatbreak
Significantly better heat transfer
Easier to disassemble and adjust

The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.

The kit contains the following parts:

0.4mm brass nozzle
heat break
cooling block

Compatible with the following printers:
		WANHAO Duplicator 6
		Monoprice Maker Ultimate 3D Printer

Specifications

Brand:

Micro Swiss

Our item no:

DMS00017

€65.00

€52.85 Excl. 23% VAT

EU warehouse

Micro Swiss all metal Hotend Kit for CR-10 Ender 3D Printers

Micro Swiss all metal Hotend Kit for CR-10 Ender 3D Printers DMS00021

Description This all-metal hot-end set from Micro Swiss for the Creality 3D Printers is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and therefore ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost x3 lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fastening parts

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10		Creality CR-20		Creality Ender-5
		Creality CR-10 Mini		Creality CR-20 Pro		TronXY X5S
		Creality CR-10S		Creality Ender-2		Tevo Tornado
		Creality CR-10S4		Creality Ender-3
		Creality CR-10S5		Creality Ender-3 Pro

NOTE: Not suitable for the Creality CR-10 V2

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00021

Order now, we can ship this today!

€75.50

€61.38 Excl. 23% VAT

In stock

Micro Swiss all metal Hotend Kit for Creality CR-10S PRO | CR-10 Max

Micro Swiss all metal Hotend Kit for Creality CR-10S PRO | CR-10 Max DMS00022

Description

This all-metal hot-end set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10S Pro
		Creality CR 10 Max

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00022

€67.00

€54.47 Excl. 23% VAT

EU warehouse

Micro Swiss CNC machined extruder handle and extruder plate for FlashForge (left)

Micro Swiss CNC machined extruder handle and extruder plate for FlashForge (left) DMS00097

Description These extruder parts are milled from aluminium and replace the standard plastic parts that can lose their function over time.
The set can be replaced one to one.

This kit contains the following parts:

High Quality Bearing Extruder Handle
Extruder plate
Set of screws
Spring

Compatible with the following printers:
	●	QIDI
	●	FlashForge Creator Pro
	●	Flash Forge Finder (Left Hand)
	●	FlashForge Guider 2 (Left Hand) (Older version, without metal plate over the heater block)

Specifications

Brand:

Micro Swiss

Our item no:

DMS00097

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Micro Swiss MK10 All Metal Hotend Kit

Micro Swiss MK10 All Metal Hotend Kit DMS00015

Description This full metal hotend upgrade from Micro Swiss for MK 10 hotends is made of 2 types of metal. The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.
The kit contains the following parts:

0.4mm brass nozzle
heat break
thermal paste

To install this set, please refer to the following installation video.

Compatible with the following printers:
		FlashForge Creator Pro		PowerSpec 3D Pro
		FlashForge Creator X		PowerSpec 3D X
		Flash Forge Dreamer		PowerSpec Ultra 3D Printer
		QIDI TECH I		Wanhao Duplicator 4S
		Dremel Idea Builder		Wanhao Duplicator 4X
		Cocoon Create 3D Print		Wanhao Duplicator 9 (D9)
		Monoprice Maker Select 3D Printer v2		Wanhao i3

Specifications

Brand:	Micro Swiss	Nozzle type:	MK10
Material:	Metal	Our item no:	DMS00015

€39.50

€32.11 Excl. 23% VAT

EU warehouse

Micro Swiss Plated Wear Resistant MK8 Hotend Upgrade

Micro Swiss Plated Wear Resistant MK8 Hotend Upgrade DMS00018

Description This MK8 full metal hotend upgrade from Micro Swiss. The unique design of the heatsink eliminates the need for a heatbreak PTFE tube. The hotend is covered with a TwinClad XT nickel composite coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

Compatible with the following printers and parts:
		MakerBot Replicator 1		MK8 Hotends
		MakerBot Replicator 2

Specifications

Brand:

Micro Swiss

Our item no:

DMS00018

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€30.50 (coming soon)

€24.80 Excl. 23% VAT

Micro Swiss Thermal Break for Micro Swiss All Metal Hotend kit (CR-10 / CR-10S Pro)

Micro Swiss Thermal Break for Micro Swiss All Metal Hotend kit (CR-10 / CR-10S Pro) DMS00113

Description This Titanium heat break from Micro Swiss is a replacement for the Micro Swiss All Metal Hotend Kit for CR10 printers.

Compatible with the following printers and parts:
		Micro Swiss hotend for CR-10 / Ender Kit
		Micro Swiss hotend for CR-10s Pro Kit

Specifications

Brand:

Micro Swiss

Our item no:

DMS00113

€15.00

€12.20 Excl. 23% VAT

EU warehouse

Micro Swiss Thermal Tube for Micro Swiss MK10 / MK11 all metal hotend kits

Micro Swiss Thermal Tube for Micro Swiss MK10 / MK11 all metal hotend kits DMS00114

Description This heat break from Micro Swiss is a replacement for the MK10 / MK11 Hotends. It is made of 2 types of metal. The lower part of the heatbreak is made of stainless steel and therefore retains the heat well, the higher part is made of aluminium so that it quickly dissipates the heat away from the filament. Because the heatbreak is completely made of metal, the heat will always be constant and printing can be done at a higher speed and temperature.

Compatible with the following printers and parts:
		FlashForge Creator Pro		Monoprice Maker Select 3D Printer v2
		FlashForge Creator X		Dremel Idea Builder
		Flash Forge Dreamer		Cocoon Create 3D Print
		PowerSpec 3D Pro		Wanhao Duplicator 4S
		PowerSpec 3D X		Wanhao Duplicator 4X
		PowerSpec Ultra 3D Printer		Wanhao i3
		QIDI TECH I		Micro Swiss MK10 / MK11 Hotends

Specifications

Brand:

Micro Swiss

Our item no:

DMS00114

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack) DMS00102

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favorable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
		Creality CR-10		MakerBot Replicator 1
		Creality CR-10S		MakerBot Replicator 2
		Creality CR-10S4		MakerBot Replicator 2x
		Creality CR-10S5		MakerBot Replicator 5th Gen
		Creality CR-10 MINI		MakerBot Replicator Mini
		Creality Ender-2		MakerBot Replicator z18
		Creality Ender-3		CraftBot 2
		Creality Ender-3 Pro		CraftBot PLUS
		Creality CR-20		BQ White box
		Creality CR-20 Pro		BQ Prusa I3 Hephestos
		Anet A6		TronXY X5S
		Anet A8		Tevo Tornado
		Alfawise U20		Micro Swiss All Metal Hotend for CR-10
		Alfawise U30		Micro Swiss All Metal Hotend for CR-10s Pro
		Prusa i3 MK2		anycubic
		Prusa i3 MK2S		Printers with a E3D V4 / V5 / V6 1.75 mm Hotend
		Prusa i3 MK3

Specifications

Brand:	Micro Swiss	Our item no:	DMS00102
Material:	Silicone	Quantity:	3

Order now, we can ship this today!

€12.50

€10.16 Excl. 23% VAT

In stock

Micro Swiss collet clips for Micro Swiss CR10 Hotend kit (3-pack)

Micro Swiss collet clips for Micro Swiss CR10 Hotend kit (3-pack) DMS00116

Description These collet clips from Micro Swiss are replacement for the Micro Swiss CR10 hotend kit.

Compatible with the following printers and parts:
		Micro Swiss hotend for CR-10 / Ender Kit
		Micro Swiss hotend for CR-10s Pro Kit

Specifications

Brand:	Micro Swiss	Quantity:	3
Our item no:	DMS00116

Order now, we can ship this today!

€8.25

€6.71 Excl. 23% VAT

In stock

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers DAR00798

Description The NG Direct Drive Extruder from Micro Swiss is suitable for Creality CR-10 and Ender 3 printers. Thanks to the Bevel Gear design, the extruder has a short filament path of less than 41 mm. The placement of the motor allows for a very compact design with little overhang. This increases the rigidity of the system.

Further highlights:

Dual-gear drive made of hardened steel
3:1 gear ratio
Lightweight
Integrated with an all-metal hotend

This product contains:

Screws and wrenches
1x mounting plate
1x hot end
1x extension cable
1x Stepper Motor
1x Extruder Assembly
1x fan shroud

Specifications

Brand:	Micro Swiss	Our item no:	DAR00798
Filament diameter:	1.75 mm

Order now, we can ship this today!

€127.50

€103.66 Excl. 23% VAT

In stock

Micro Swiss NG Direct Drive Extruder for Creality Ender 6

Micro Swiss NG Direct Drive Extruder for Creality Ender 6 DAR00928

Description The Micro Swiss NG™ Direct Drive Extruder is a lightweight extruder for the Creality Ender 6. The design has the shortest TwinClad XT™ plated filament path currently on the market and has a Micro Swiss All Metal Hotend. Due to the Bevel Gear system, there is also a short filament path of even less than 41mm. The unique placement of the LDO Stepper motor enables a very compact overhang design, ensuring an optimal printing experience for every user.

Not suitable for use in combination with the BL-Touch.

Specifications

Brand:	Micro Swiss	Our item no:	DAR00928
Filament diameter:	1.75 mm

€141.50

€115.04 Excl. 23% VAT

EU warehouse

Micro Swiss NG Direct Drive Extruder for Creality Ender-5 / 5 Pro / 5 Plus

Micro Swiss NG Direct Drive Extruder for Creality Ender-5 / 5 Pro / 5 Plus DAR01059

Description The Micro Swiss NG™ Direct Drive Extruder is a lightweight extruder that fits perfectly on the Creality Ender 5, 5 Pro and 5 plus. The Bevel Gear system ensures that the TwinClad XT™ plated filament path is less than 41mm. The positioning of the motor allows for a low overhang design. With the hardened steel Dual Gear feed and the Micro Swiss All Metal Hotend, this is an extruder that provides an optimal printing experience for every user.

Specifications

Brand:	Micro Swiss	Our item no:	DAR01059
Filament diameter:	1.75 mm

€169.00

€137.40 Excl. 23% VAT

EU warehouse

Micro Swiss CNC machined extruder handle for the Wanhao i3 extruder

Micro Swiss CNC machined extruder handle for the Wanhao i3 extruder DMS00091

Description This extruder part is milled from aluminium and replaces the standard plastic part that can lose its function over time.
The part can be replaced one on one.

This kit contains the following section:

High Quality Bearing Extruder Handle

Compatible with the following printers:
	●	Wanhao i3
	●	Wanhao i3 Plus
	●	Monoprice Maker Select V2
	●	Cocoon Create 3D Printer

Specifications

Brand:	Micro Swiss	Our item no:	DMS00091
Material:	Aluminum

€22.50

€18.29 Excl. 23% VAT

EU warehouse

Micro Swiss CNC machined extruder handle for the Wanhao Duplicator 6 extruder

Micro Swiss CNC machined extruder handle for the Wanhao Duplicator 6 extruder DMS00092

Description This extruder part is machined from aluminium and replaces the standard plastic part that can lose its function over time.
The part can be replaced one on one.

The kit contains the following parts:

High Quality Bearing Extruder Handle

Compatible with the following printers:
	●	Wanhao Duplicator 6
	●	Monoprice Maker Ultimate 3D Printer

Specifications

Brand:	Micro Swiss	Our item no:	DMS00092
Material:	Aluminum

€22.50

€18.29 Excl. 23% VAT

EU warehouse

Micro Swiss CNC machined extruder handle and extruder plate for the Wanhao i3 (complete)

Micro Swiss CNC machined extruder handle and extruder plate for the Wanhao i3 (complete) DMS00094

Description These extruder parts are milled from aluminium and replace the standard plastic parts that can lose their function over time. The set can be replaced one to one.

The kit contains the following parts:

High Quality Bearing Extruder Handle
Extruder plate
Set of screws
Spring

Compatible with the following printers:
	●	Wanhao i3
	●	Wanhao i3 Plus
	●	Monoprice Maker Select V2
	●	Cocoon Create 3D Printer

Specifications

Brand:	Micro Swiss	Our item no:	DMS00094
Material:	Aluminum

€33.50

€27.24 Excl. 23% VAT

EU warehouse

Micro Swiss CNC machined extruder handle and extruder plate for the Duplicator 6 extruder

Micro Swiss CNC machined extruder handle and extruder plate for the Duplicator 6 extruder DMS00096

Description These extruder parts are milled from aluminium and replace the standard plastic parts that can lose their function over time. The set can be replaced one to one.

The kit contains the following parts:

High Quality Bearing Extruder Handle
Extruder plate
Set of screws
Spring

Compatible with the following printers:
	●	Wanhao Duplicator 6
	●	Monoprice Maker Ultimate 3D Printer

Specifications

Brand:	Micro Swiss	Our item no:	DMS00096
Material:	Aluminum

€33.50

€27.24 Excl. 23% VAT

EU warehouse

Micro Swiss all metal Hotend Kit for Creality CR-6 SE (Max)

Micro Swiss all metal Hotend Kit for Creality CR-6 SE (Max) DMS00120

Description This all-metal hot-end set from Micro Swiss for the Creality CR-6 SE (Max) is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink eliminates the need for a heatbreak PTFE tube and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost x3 lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fastening parts

Compatible with the following printers:
● Creality CR-6 SE
● Creality CR-6 SE Max

Specifications

Brand:	Micro Swiss	Our item no:	DMS00120
Filament diameter:	1.75 mm

€75.50

€61.38 Excl. 23% VAT

EU warehouse

Micro Swiss Bowden Dual Gear Extruder

Micro Swiss Bowden Dual Gear Extruder DMS00121

Description The Micro Swiss Bowden dual drive extruder is designed as a quick and easy replacement for most Bowden-type 3D printers.

Most important features:

• Dual drive
• Hardened tool steel, CNC precision cut gears
• Adjustable filament grip
• Easy filament loading
• Excellent extrusion control
• E-steps value: 130

Specifications

Brand:

Micro Swiss

Our item no:

DMS00121

Order now, we can ship this today!

€49.50

€40.24 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2025 - 123-3d.ie