Filament sensors

Description With the Filament Sentinel from Dyze, filament congestion is a thing of the past!

Prevent failed 3D prints with this filament detector that gives a signal when something is wrong with the filament. In addition, the detector cleans the filament and is easy to mount on your single or dual extruder 3D printer. Attach one or more sentinels to the filament spool holder or in front of the extruder for optimal operation. Suitable for any type of filament with a diameter of 2.85mm.

Note: Does your 3D printer not have an LCD screen? Then the sentinel only works with an Octoprint/OctoPi.

Download the specifications here.

Specifications

Brand:	Dyze Design	Our item no:	DYZ00013
Current rating:	31 ma	Screwthread type:	M8
Filament diameter:	2.85 mm	Voltage:	5 v
Max operating temp:	70 °C

Order now, we can ship this today!

€39.50

€32.11 Excl. 23% VAT

In stock

Filament run-out sensor for 1.75mm filament

Zoom in

Description This filament run-out sensor for 1.75mm filament detects an empty spool in time and ensures that your prints never fail again!

The product comes with a 100cm long wire:

Red - + 5/3V
Black - Ground
White - Signal

The sensor has a clear arrow marking for the direction of the filament and is very sensitive so that the filament will be detected quickly. The sensor can be easily mounted through the two 3mm holes.

Specifications

Brand:	123-3D	Filament diameter:	1.75 mm
Cable length:	100 cm	Dimensions:	12.5 x 22 x 30 mm
Colour:	black	Our item no:	DAR00008

Order now, we can ship this today!

€7.75

€6.30 Excl. 23% VAT

In stock

BigTreeTech SFS v1.0 smart filament detection sensor

Zoom in

Description Never let a 3D project fail due to filament problems with this SFS V1.0 filament detection sensor from Bigtreetech.

This high-quality sensor is suitable for almost any filament type with a size of 1.75mm and detects in time whether there is something wrong with your filament. Has the filament run out halfway through the print or does the filament appear to be broken for unforeseen reasons during printing? Then this smart filament sensor ensures that your 3D print is automatically paused so that you can solve the problem and your print can be successfully resumed.

The sensor has a response time of only 7mm, can be easily connected to different displays and is compatible with almost any motherboard with a break detection interface such as the SKR mini E3, SKR E3 DIP, SKR V1.3, MKS GEN L, MKS GEN V1.4 and more.

Specifications

Brand:	BigTreeTech	Our item no:	DAR00248
Dimensions:	29.55 x 75 x 30 mm	Weight:	0.06 kg
Input voltage:	3.3V-5V

Order now, we can ship this today!

€24.50

€19.92 Excl. 23% VAT

In stock

Creality 3D CR-200B Filament detection kit

Zoom in

Description This Creality filament sensor kit is suitable for the following models of Creality printers: CR-200B, CR-30 (PrintMill), CR-6 SE, CR-10 Smart, CR-10 Smart Pro, CR-6 Max and the Ender- 7. When the filament runs out, a red LED lights up on the sensor. As soon as the sensor detects filament again, the LED lights up blue.

Specifications

Brand:

Creality 3D

Our item no:

DAR00584

€15.50

€12.60 Excl. 23% VAT

EU warehouse

BigTreeTech SFS v2.0 smart filament detection sensor

Zoom in

Description This smart filament detection sensor helps you prevent problems with your filament. When a problem is detected, an error will appear on the screen and printing will be automatically paused. It can detect 4 problems: clogged nozzle, filament tangled, running out of filament and extruder problems. This is done by means of a very precise photoelectric sensor.

Real-time status indication
A light indicates the status of your filament. With blue flashing light, printing proceeds normally, with red light the filament is empty or broken. If there is a continuous blue light or no light, it could be one of the other problems that this sensor can detect. To find out exactly what the problem is, you can check your filament and extruder.

Easily install on your printer
The bi-directional supply system ensures that you will have no problems with installation. The sensor is 53.1mm x 30.3mm x 27.3mm and has 3 mounting holes for easy attachment to your printer.

Other functionalities
The smart filament detection sensor is equipped with a filament feed lever, making it easy to load filament. It also has firmware support for RRF, Klipper and Marlin and works with both a direct drive extruder and a bowden extruder.

Specifications

Brand:	BigTreeTech	Our item no:	DAR01239
Dimensions:	30.3 x 53.1 x 27.3 mm	Weight:	0.036 kg
Input voltage:	3.3V-5V

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Creality 3D Ender-5 S1 filament detection sensor

Zoom in

Description Prevent failed 3D prints with this Creality 3D Ender-5 S1 filament detection sensor. The sensor signals when something is wrong with the filament, so you can pause the print. This is compatible with the Ender-5 S1 3D printers from Creality 3D.

Specifications

Brand:	Creality 3D	Filament diameter:	1.75 mm
Colour:	black	Our item no:	DAR01269

€10.50

€8.54 Excl. 23% VAT

EU warehouse

BIQU Ajax TD1S

Zoom in

Description The BIQU AJAX TD1S is an advanced filament sensor that measures the transmission distance (TD) and the exact colour code of your filament. Developed in collaboration with AJAX 3D and BIQU, this compact device offers accurate measurements and seamless integration with HueForge for realistic 3D prints.

Key Features:

Accurately measure the transmission distance (TD) and colour code of filament
Seamless integration with HueForge for photorealistic renderings
Standalone use possible thanks to OLED display and USB-C power supply

Specifications

Brand:	BIQU	Dimensions:	24.5 x 54.5 x 21.6 mm
Colour:	black	Our item no:	DAR02482
Filament diameter:	1.75 mm	USB version:

€98.50

€80.08 Excl. 23% VAT

EU warehouse

Creality 3D Sermon D1 Filament Sensor Kit

Zoom in

Description This Creality 3D Filament Sensor Kit is suitable for the following Creality printers: Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus and the CR-M4.

Specifications

Brand:	Creality 3D	Our item no:	DRO00196
Filament diameter:	1.75 mm

€17.50

€14.23 Excl. 23% VAT

EU warehouse

Dyze Sentinel filament detector, 1.75mm

Zoom in

Description

The Dyze Sentinel is a filament detector and gives a message if there is something wrong with the filament. In addition to the detection functionality, the Sentinel also makes the filament dust-free.

1.75mm and 2.85mm are supported and it is possible to connect multiple Sentinels using a daisy chain method for easy monitoring of multiple extruders.

The primary connection cable is included.

Specifications