Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

E3D Volcano copper nozzle, 1.75mm x 0.60mm

E3D Volcano copper nozzle, 1.75mm x 0.60mm DED00124

Description This E3D Volcano nozzle has an opening of 0.6mm and is ideal for printing tall layers with 1.75mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DED00124
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

E3D Volcano copper nozzle, 1.75mm x 0.80mm

E3D Volcano copper nozzle, 1.75mm x 0.80mm DED00125

Description This E3D Volcano nozzle has an opening of 0.6mm and is ideal for printing tall layers with 1.75mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DED00125
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

E3D Volcano copper nozzle, 1.75mm x 1.00mm

E3D Volcano copper nozzle, 1.75mm x 1.00mm DED00126

Description This E3D Volcano nozzle has an opening of 0.8mm and is ideal for printing tall layers with 1.75mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DED00126
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€19.50 (coming soon) (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

E3D brass Volcano nozzle, 1.75mm x 0.4mm

E3D brass Volcano nozzle, 1.75mm x 0.4mm DED00047

Description This E3D volcano nozzle has an opening of 0.4mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00047
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€8.25 (Incl. 23% VAT) (€6.71 Excl. 23% VAT)

In stock

E3D Volcano brass nozzle, 1.75mm x 0.60mm

E3D Volcano brass nozzle, 1.75mm x 0.60mm DED00033

Description This brass E3D Volcano nozzle has an opening of 0.6mm and is ideal for printing tall layers with 1.75mm filament. The high-quality nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DED00033
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€8.25 (Incl. 23% VAT) (€6.71 Excl. 23% VAT)

In stock

E3D brass Volcano nozzle, 1.75mm x 0.8mm

E3D brass Volcano nozzle, 1.75mm x 0.8mm DED00034

Description This E3D volcano nozzle has an opening of 0.8mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DED00034
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€8.25 (Incl. 23% VAT) (€6.71 Excl. 23% VAT)

In stock

E3D brass Volcano nozzle, 1.75mm x 1mm

E3D brass Volcano nozzle, 1.75mm x 1mm DED00035

Description This E3D volcano nozzle has an opening of 1mm and is ideal for printing tall layers with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DED00035
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25 (Incl. 23% VAT) (€6.71 Excl. 23% VAT)

EU warehouse

E3D brass Volcano nozzle, 1.75mm x 1.2mm

E3D brass Volcano nozzle, 1.75mm x 1.2mm DED00036

Description This E3D volcano nozzle has an opening of 1.2mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	1.75 mm	Our item no:	DED00036
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25 (Incl. 23% VAT) (€6.71 Excl. 23% VAT)

EU warehouse

E3D Volcano hardened steel nozzle 1.75 x 0.8mm

E3D Volcano hardened steel nozzle 1.75 x 0.8mm DED00220

Description The hardened steel E3D Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and an opening of 0.8mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DED00220
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€26.00 (Incl. 23% VAT) (€21.14 Excl. 23% VAT)

EU warehouse

E3D Volcano hardened steel nozzle 1.75 x 1mm

E3D Volcano hardened steel nozzle 1.75 x 1mm DED00222

Description The hardened steel E3D Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1mm.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DED00222
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.00 (coming soon) (Incl. 23% VAT) (€21.14 Excl. 23% VAT)

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.25mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.25mm DMS00106

Description The Micro Swiss Brass Volcano nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.25mm.

Compatible with the following printers:

Printers with an E3D Volcano hotend (1.75mm filament)
Artillery Sidewinder X1

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.25 mm
Filament diameter:	1.75 mm	Our item no:	DMS00106
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.4mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.4mm DMS00068

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00068
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€19.50 (coming soon) (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.60mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.60mm DMS00069

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMS00069
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.80mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 0.80mm DMS00070

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMS00070
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 1mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 1.75mm x 1mm DMS00071

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.00mm.

Compatible with the following printers:
	●	Printers with an E3D Volcano hot end (1.75mm filament)
	●	Artillery Sidewinder X1

Specifications

Brand:	Micro Swiss	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DMS00071
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50 (Incl. 23% VAT) (€15.85 Excl. 23% VAT)

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm DAR00946

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00946
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this today!

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm DAR00947

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00947
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm DAR00948

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00948
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this today!

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm DAR00949

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00949
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00 (Incl. 23% VAT) (€44.72 Excl. 23% VAT)

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack) DAR00959

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Our item no:	DAR00959
Filament diameter:	1.75 mm	Quantity:	4
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€193.00 (Incl. 23% VAT) (€156.91 Excl. 23% VAT)

EU warehouse

Flsun V400 brass nozzle, 1.75mm x 0.4mm

Flsun V400 brass nozzle, 1.75mm x 0.4mm DAR00996

Description This 0.4mm Flsun nozzle is an original replacement part for Flsun V400 3D printers. The nozzle is made of brass, allowing high printing speeds to be achieved.

Specifications

Brand:	Flsun	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00996
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

€10.50 (Incl. 23% VAT) (€8.54 Excl. 23% VAT)

EU warehouse

E3D Zodiac Volcano CRB nozzle, 1.75mm x 0.40mm

E3D Zodiac Volcano CRB nozzle, 1.75mm x 0.40mm DAR01160

Description The E3D Zodiac Volcano CRB nozzle is designed to be abrasion resistant and prevent filament build-up. This means that it can be used again and again, without showing any signs of use. The filament will also stick less, so it will not clog the nozzle. CRB nozzles can be used with temperatures up to 300℃, which makes them ideal for printing with many different filaments. This nozzle is 0.40mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	21 mm	Our item no:	DAR01160
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon) (Incl. 23% VAT) (€38.62 Excl. 23% VAT)

E3D Zodiac Volcano CRB nozzle, 1.75mm x 0.60mm

E3D Zodiac Volcano CRB nozzle, 1.75mm x 0.60mm DAR01161

Description The E3D Zodiac Volcano CRB nozzle is designed to be abrasion resistant and prevent filament build-up. This means that it can be used again and again, without showing any signs of use. The filament will also stick less, so it will not clog the nozzle. CRB nozzles can be used with temperatures up to 300℃, which makes them ideal for printing with many different filaments. This nozzle is 0.60mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	21 mm	Our item no:	DAR01161
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon) (Incl. 23% VAT) (€38.62 Excl. 23% VAT)

E3D Zodiac Volcano PRO nozzle, 1.75mm x 0.40mm

E3D Zodiac Volcano PRO nozzle, 1.75mm x 0.40mm DAR01162

Description The E3D Zodiac Volcano PRO nozzle is designed to be even more wear resistant than the CRB nozzles. This Pro nozzle can be used with temperatures up to 450℃. This makes it ideal for use with filament that needs to be printed at very high temperatures. The Zodiac Volcano Pro is made from hardened tool steel and has a double layer coating. This nozzle is 0.40mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	21 mm	Our item no:	DAR01162
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	450 °C

Nozzle diameter:

€75.50 (Incl. 23% VAT) (€61.38 Excl. 23% VAT)

EU warehouse

E3D Zodiac Volcano PRO nozzle, 1.75mm x 0.60mm

E3D Zodiac Volcano PRO nozzle, 1.75mm x 0.60mm DAR01163

Description The E3D Zodiac Volcano PRO nozzle is designed to be even more wear resistant than the CRB nozzles. This Pro nozzle can be used with temperatures up to 450℃. This makes it ideal for use with filament that needs to be printed at very high temperatures. The Zodiac Volcano Pro is made from hardened tool steel and has a double layer coating. This nozzle is 0.60mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	21 mm	Our item no:	DAR01163
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	450 °C

Nozzle diameter:

€75.50 (Incl. 23% VAT) (€61.38 Excl. 23% VAT)

EU warehouse

E3D Volcano silicone sock (3-pack)

E3D Volcano silicone sock (3-pack) DED00244

Description Give your hot end an upgrade with this Volcano silicone sock for E3D or other volcano style hot ends.

Prevent heat loss and prevent filament residues from sticking to your heater block with this heat-resistant silicone sock. In addition, the temperature is more stable, so you can also print 'bridges' or 'overhangs' of a higher quality. After attaching the sock, it adapts to the heater block. Suitable for nozzles with a diameter of 0.4 mm to 1.2 mm.

The sock has a lifespan of 100+ hours and is in a pack of 3.

Specifications

Brand:	E3D	Material:	Silicone
Colour:	orange	Our item no:	DED00244

Order now, we can ship this today!

€10.00 (Incl. 23% VAT) (€8.13 Excl. 23% VAT)

In stock

E3D nozzle wrench, 7mm

E3D nozzle wrench, 7mm DED00053

Description Use this wrench to carefully attach your E3D nozzle.

Specifications

Brand:	E3D	Our item no:	DED00053
Material:	Steel

Order now, we can ship this today!

€2.75 (Incl. 23% VAT) (€2.24 Excl. 23% VAT)

In stock

E3D V6 silicone sock pro for hot ends (3-pack)

E3D V6 silicone sock pro for hot ends (3-pack) DED00072

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Brand:	E3D	Our item no:	DED00072
Colour:	blue

Order now, we can ship this today!

€6.00 (Incl. 23% VAT) (€4.88 Excl. 23% VAT)

In stock

© 2025 - 123-3d.ie