Multi extrusion

E3D V6 Chimera+ extruder kit | 12V, 1.75mm

Description The E3D Chimera+ is a 12V air-cooled 2-in, 2-out extruder kit. This set is only for 1.75mm Bowden printers. The nozzles can be individually adjusted in height and temperature.

The kit contains the following parts:

2 x E3D blue plastic collet clips.
2 x E3D black plastic collets.
2 x E3D silicone sock.
2 x E3D v6 nozzle brass 1.75mm x 0.40mm.
2 x E3D v6 heater block.
2 x E3D heater cartridge 12V 30W.
2 x E3D thermistor cartridge.
E3D air-cooled heatsink.
800mm PTFE Bowden tube.
12V 30 x 30 x 10mm fan.
Thermal paste.
Mounting kit.

You can view the technical specifications here.

Specifications

Brand:	E3D	Our item no:	DED00146
Filament diameter:	1.75 mm	Voltage:	12 v
Nozzle diameter:	0.4 mm

€153.00

€124.39 Excl. 23% VAT

EU warehouse

E3D V6 Cyclops+ extruder kit | 12V, 1.75mm

Zoom in

Description The E3D Cyclops+ is a 12V air-cooled 2-in, 1-out extruder kit. This set is only for 1.75mm Bowden printers. The 2 in, 1 out method makes this kit easier to set up than a 2 in, 2 out setup. Because this kit only uses 1 nozzle, you will never have problems with a leaking second nozzle.

The kit contains the following parts:

E3D air-cooled heatsink.
2 x E3D black plastic collets.
2 x E3D blue plastic collet clips.
Cyclops+ mounting kit.
80cm PTFE Bowden tube.
12V 30 x 30 x 10mm fan.
E3D v6 brass nozzle 1.75mm x 0.40mm.
E3D Cyclops heater block.
2 x E3D Kraken heat breaks.
Thermal paste.
E3D heater cartridge 12V 30W.
E3D thermistor cartridge.

You can view the technical specifications here.

Specifications

Brand:	E3D	Our item no:	DED00147
Filament diameter:	1.75 mm	Voltage:	12 v
Nozzle diameter:	0.4 mm

€137.00

€111.38 Excl. 23% VAT

EU warehouse

Capricorn XS heat break liner, 2mm x 3mm (300mm)

Zoom in

Description The Capricorn XS heat break liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heat breaks.

Specifications

Brand:	Capricorn	Length:	30 cm
Colour:	dark blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	3 mm
Inner diameter:	2 mm	Our item no:	DBW00066

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50 (coming soon)

€10.16 Excl. 23% VAT

E3D v6 The Kraken water cooled extruder set

Zoom in

Description Upgrade your 3D printer with The Kraken, a complete extruder set with multiple nozzles.

Ideal for use in a heated chamber, this compact, water-cooled extruder is made entirely of metal. The Kraken comes with 4 nozzles, which can all print separately at a different temperature and with a different color in one and the same 3D print. In addition, each nozzle can be individually adjusted in height and adjusted proportionally to the print bed.

This set is suitable for filament with a diameter of 1.75mm and is supplied with 4 nozzles of 0.4mm as standard. You also do not need a fan for this design, simple passive cooling is sufficient!

The Kraken set consists of:

one 40mm x 35mm hot end
four nozzles of 0.4mm
four heating elements
four thermistors
four V5 heating blocks
four connector cables
one water pump
tubes, nuts, etc.

PLEASE NOTE: This set is especially suitable for advanced users and does not contain a water reservoir. You must make these yourself.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00246
Material:	Metal

€199.50

€162.20 Excl. 23% VAT

EU warehouse

Heaterblock insulation cotton

Zoom in

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications