Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Customer reviews

Official Reviews.io

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

24V

E3D V6 universal hot end 1.75mm (only metal parts)

E3D V6 universal hot end 1.75mm (only metal parts) DED00024

Description This kit contains only the metal hot end parts and is intended for users with some experience and/or in possession of their own parts. Electronic components and the PTFE tube are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hot end. The heatsink has an integrated Bowden coupling.

The kit contains the following components:

E3D V6 aluminium heatsink 1.75mm;
E3D V6 aluminium heater block;
E3D V6 heat break 1.75mm;
E3D V6 brass nozzle 1.75mm x 0.4mm;
E3D V6 spare fasteners;

This kit can be used in both a Bowden and a direct drive setup.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00024
Max operating temp:	400 °C

€45.50

€36.99 Excl. 23% VAT

EU warehouse

E3D V6 All-Metal hotend kit | 24V Bowden, 2.85mm

E3D V6 All-Metal hotend kit | 24V Bowden, 2.85mm DED00297

Description This complete V6 hotend kit (24V Bowden) for your 3D printer contains all parts for the v6 hotend (2.85mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic heating cartridge 24V
E3D v6 Bowden clutch 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00297
Filament diameter:	2.85 mm	Voltage:	24 v

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D V6 All-Metal hotend kit | 24V Direct Drive, 2.85mm

E3D V6 All-Metal hotend kit | 24V Direct Drive, 2.85mm DED00299

Description This complete V6 hotend kit (24V Direct Drive) for your 3D printer contains all parts for the v6 hotend (2.85 mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic heating cartridge 24V
E3D v6 Direct Drive coupling 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00299
Filament diameter:	2.85 mm	Voltage:	24 v

€67.00

€54.47 Excl. 23% VAT

EU warehouse

E3D Plated Copper Volcano upgrade kit | 24V, 1.75mm

E3D Plated Copper Volcano upgrade kit | 24V, 1.75mm DED00284

Description The copper-plated E3D Volcano upgrade set improves the performance of a printer's hot end. Thanks to the copper plating, the hot end can easily be heated up to 285 Celsius with an expandability of up to 500 Celsius. An additional advantage of copper plating is that the heat conductivity is three times higher than that of brass. This means that the relative retention of heat is three times greater. This ensures that there is a more constant temperature, which promotes the flow of filament.

The kit includes a copper plated heating block, mounting kit, 0.8mm copper plated 1.75 or 2.85mm nozzle, 30W standard 24v heating element, Thermistor cartridge along with an extension cable, thermal paste and a cable tie.

Specifications

Brand:	E3D	Our item no:	DED00284
Filament diameter:	1.75 mm	Voltage:	24 v
Material:	Copper

€87.00

€70.73 Excl. 23% VAT

EU warehouse

E3D Volcano hotend kit | 24V, 1.75mm (with Bowden add-on)

E3D Volcano hotend kit | 24V, 1.75mm (with Bowden add-on) DED00293

Description The Volcano hotend kit 1.75 mm 24V (with bowden add-on) from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm bowden
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 24V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30 x 30 x 10 mm fan 24V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Brand:	E3D	Our item no:	DED00293
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€75.50

€61.38 Excl. 23% VAT

EU warehouse

E3D Volcano hotend kit | 24V Direct Drive, 1.75mm

E3D Volcano hotend kit | 24V Direct Drive, 1.75mm DED00295

Description The Volcano HotEnd kit 1.75 mm 24V Direct Drive from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm direct
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 24V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30 x 30 x 10 mm fan 24V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Brand:	E3D	Our item no:	DED00295
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€71.00

€57.72 Excl. 23% VAT

In stock

E3D Volcano upgrade kit | 24V, 1.75mm

E3D Volcano upgrade kit | 24V, 1.75mm DED00286

Description The Volcano Upgrade kit 1.75 mm 24V from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x 0.8mm brass Volcano nozzle

Specifications

Brand:	E3D	Our item no:	DED00286
Max temp:	285 °C	Voltage:	24 v

€37.50

€30.49 Excl. 23% VAT

EU warehouse

E3D Volcano Eruption upgrade kit | 24V, 1.75mm

E3D Volcano Eruption upgrade kit | 24V, 1.75mm DED00291

Description The Volcano Eruption upgrade kit 1.75 mm 24V from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x brass Volcano nozzles: 0.60 / 0.80 / 1.00 / 1.20 mm

Specifications

Brand:	E3D	Our item no:	DED00291
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	285 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€51.00 (coming soon)

€41.46 Excl. 23% VAT

E3D Super Volcano upgrade kit | 24V, 1.75mm (1 x 1mm nozzle)

E3D Super Volcano upgrade kit | 24V, 1.75mm (1 x 1mm nozzle) DED00228

Description The E3D Super Volcano upgrade kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 24V, brass nozzle 1.75mm and thermal paste.

Specifications

Brand:	E3D	Our item no:	DED00228
Filament diameter:	1.75 mm	Voltage:	24 v
Power rating:	80 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€127.00 (coming soon)

€103.25 Excl. 23% VAT

E3D Super Volcano upgrade starter kit | 24V, 1.75mm (.8mm, 1mm, 1.2mm, 1.4mm nozzles)

E3D Super Volcano upgrade starter kit | 24V, 1.75mm (.8mm, 1mm, 1.2mm, 1.4mm nozzles) DED00227

Description The E3D Super Volcano upgrade kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 24V, brass nozzle 1.75mm and thermal paste. The starter kit comes with an extra set of nozzles. These come in sizes 0.8mm, 1.0mm, 1.2mm, 1.4mm.

Specifications

Brand:	E3D	Our item no:	DED00227
Filament diameter:	1.75 mm	Voltage:	24 v
Power rating:	80 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€169.00 (coming soon)

€137.40 Excl. 23% VAT

E3D Super Volcano upgrade kit | 24V, 2.85mm (1 x 1mm nozzle)

E3D Super Volcano upgrade kit | 24V, 2.85mm (1 x 1mm nozzle) DED00229

Description The E3D Super Volcano upgrade kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 24V, brass nozzle 2.85mm, thermal paste and a mosfet with accompanying wiring.

Specifications

Brand:	E3D	Our item no:	DED00229
Filament diameter:	2.85 mm	Voltage:	24 v
Power rating:	80 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€142.50 (coming soon)

€115.85 Excl. 23% VAT

E3D Super Volcano upgrade starter kit | 24V, 2.85mm (.8mm, 1mm, 1.2mm, 1.4mm nozzles)

E3D Super Volcano upgrade starter kit | 24V, 2.85mm (.8mm, 1mm, 1.2mm, 1.4mm nozzles) DED00230

Description The E3D Super Volcano upgrade starter kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 24V, brass nozzle 2.85mm and thermal paste. The starter kit comes with an extra set of nozzles. These come in the sizes 0.8mm, 1.0mm, 1.2mm, 1.4mm.

Specifications

Brand:	E3D	Our item no:	DED00230
Filament diameter:	2.85 mm	Voltage:	24 v
Power rating:	80 W

€159.00

€129.27 Excl. 23% VAT

EU warehouse

E3D Prusa V6 MK3 HotEnd kit 24V

E3D Prusa V6 MK3 HotEnd kit 24V DED00255

Description The E3D Prusa V6 mk3 is a 24 volt Prusa compatible hot end. Thanks to the 40W heater cartridge, the V6 hot end is able to print at temperatures up to 300ᵒC. The kit includes a 40W 24 Volt heater and thermistor cartridge, an aluminum heater block, aluminum heatbrake and a collet with collet clip.

Specifications

Brand:	E3D	Power rating:	40 W
Filament diameter:	1.75 mm	Our item no:	DED00255
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.4 mm

€81.00

€65.85 Excl. 23% VAT

EU warehouse

E3D V6 silicone sock pro for hot ends (3-pack)

E3D V6 silicone sock pro for hot ends (3-pack) DED00072

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Brand:	E3D	Our item no:	DED00072
Colour:	blue

€6.00

€4.88 Excl. 23% VAT

In stock

E3D Hemera Tool upgrade kit, 24V

E3D Hemera Tool upgrade kit, 24V DED00269

Description The E3D Hemera Tool upgrade set allows you to easily integrate a Hemera printhead into the E3D ToolChanger system. The set includes a build plate along with a receiver, cooling fan, torque set, Hemera mounting, PCB connection board and a 24v 30W heating element.

Specifications

Brand:	E3D	Voltage:	24 v
Our item no:	DED00269

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€142.00 (coming soon)

€115.45 Excl. 23% VAT

Heaterblock insulation cotton

Heaterblock insulation cotton DVB00017

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Brand:	123-3D	Our item no:	DVB00017
Dimensions:	75 x 21 mm	Thickness:	3 mm

€1.35

€1.10 Excl. 23% VAT

In stock

E3D V6 Chimera+ kit | 1.75mm, 24V

E3D V6 Chimera+ kit | 1.75mm, 24V DED00280

Description The Chimera+ is a versatile hotend with two filaments and two nozzles. It is a versatile dual extrusion system that can print two different types of filament at the same time. The water-cooled Chimera+ kit is useful for heated build rooms where air cooling is not suitable, such as at ambient temperatures above 40°C. With the kit you can print materials such as PEEK at a high temperature. The Chimera+ can reach a maximum temperature of 300°C and is compatible with the E3D ecosystem.

This kit contains the following parts:

1x air-cooled HeatSink
1x Cylops+ mounting kit
1x 30x30x10mm 24V
2x V6 silicone socks
2x PTFE tube 800 mm
2x brass nozzles 0.4mm 1.75mm
2x V6 Aluminum Heater Blocks
2x V6 mounting sets
2x 30W heating cartridge 24V
2x thermistor cartridge
2x thermistor extension cable
Collet clips

Specifications

Brand:	E3D	Our item no:	DED00280
Filament diameter:	1.75 mm	Voltage:	24 v

€131.00

€106.50 Excl. 23% VAT

EU warehouse

E3D V6 water cooled Chimera+ kit | 1.75mm, 24V

E3D V6 water cooled Chimera+ kit | 1.75mm, 24V DED00279

Description The Chimera+ is a versatile hotend with two filaments and two nozzles. It is a versatile dual extrusion system that can print two different types of filament at the same time. The water-cooled Chimera+ kit is useful for heated build rooms where air cooling is not suitable, such as at ambient temperatures above 40°C. With the kit you can print materials such as PEEK at a high temperature. The Chimera+ can reach a maximum temperature of 300°C and is compatible with the E3D ecosystem.

This kit contains the following parts:

1x water-cooled HeatSink
1x Cylops+ mounting kit
1x 30x30x10mm 24V
2x V6 silicone socks
2x PTFE tube 800mm
2x brass nozzles 0.4mm 1.75mm
2x V6 Aluminum Heater Blocks
2x V6 mounting sets
2x 30W heating cartridge 24V
2x thermistor cartridge
2x thermistor extension cable
Collet clips

Specifications

Brand:	E3D	Our item no:	DED00279
Filament diameter:	1.75 mm	Voltage:	24 v

€163.00

€132.52 Excl. 23% VAT

EU warehouse

E3D V6 Gold Edition hotend kit | 24V Bowden, 1.75mm

E3D V6 Gold Edition hotend kit | 24V Bowden, 1.75mm DED00301

Description The V6 Gold Edition hotend kit 24V Bowden (1.75mm) from E3D is suitable for high temperatures (maximum 285°C). Thanks to the gold-plated copper block, the heat transfer to the filament increases. This reduces the chance that filament residues will stick to the hotend. The brass nozzle is made of hardened steel. Do you print with carbon fiber, wood/metal filled filaments or even glow-in-the-dark filaments? Then these nozzles are ideal. The heating elements are precise and quick disconnect cartridges. The shortcuts allow you to remove the hotend easily.

This kit contains:

Gold anodized HeatSink 1.75mm
V6 HeatBreak 1.75mm
Hardened steel nozzle 1.75mm x 0.4mm
Thermistor cartridge
Thermistor extension cable
Heating cartridge 24V
30mm x 30mm x 10mm 24V
V6 clear fan duct
V6 mounting kit
V6 plated copper heating block
Capricorn tube 100mm
thermal paste
collet
collet clamp

Specifications

Brand:	E3D	Our item no:	DED00301
Filament diameter:	1.75 mm	Voltage:	24 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€113.00 (coming soon)

€91.87 Excl. 23% VAT

E3D v6 hot end complete kit | 24V, 1.75mm Universal (with Bowden add-on)

E3D v6 hot end complete kit | 24V, 1.75mm Universal (with Bowden add-on) DED00305

Description This complete v6 hot end complete kit - 1.75mm Universal (with Bowden add-on) (24V) from E3D for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 24V
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00305
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D, BCN3D hot end family

E3D, BCN3D hot end family DCP00200

Description With the BCN3D hot end family you get a complete package. Thanks to the different sizes of hot ends, you can push the boundaries of 3D printing.

For example, you can print the outside of the model with a 0.4mm nozzle for the most beautiful details and have the inside printed with a 1.0mm for extra strength.

With this hot end you can print with different filaments such as PLA, PVA, ABS, TPU, Nylon and many others. With the 0.6mm nozzle made of hardened steel you can also print abrasive materials such as wood, metal, carbon and glow-in-the-dark.

The BCN3D hot end family comes with the following:

2x Hot end X 0,6mm by E3D
2x Hot end 0.8mm by E3D
2x Hot end 1.0mm by E3D

	●	BCN3D Epsilon W27
	●	BCN3D Epsilon W50

Additional information: Installation video (YouTube)

Specifications

Brand:	BCN3D	Our item no:	DCP00200
Filament diameter:	2.85 mm	Voltage:	24 v

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€607.00 (coming soon)

€493.50 Excl. 23% VAT

E3D v6 upgrade kit heaterblock & silicone sock

E3D v6 upgrade kit heaterblock & silicone sock DED00250

Description This v6 aluminum heater block kit allows you to upgrade an old style clamp mount block for use with cartridge thermistors. Supplied with an M3 set screw for the thermistor cartridge and an M3 button head screw to clamp the heater cartridge.

This kit includes;

1 x V6 aluminum heater block
1 x V6 Standard Sock
1 x Thermistor Cartridge
1 x thermistor extension cable
1 x V6 mounting kit

Specifications

Brand:	E3D	Our item no:	DED00250
Max temp:	285 °C

€24.50

€19.92 Excl. 23% VAT

In stock

E3D v6 hot end complete kit | 24V Direct, 1.75mm Universal

E3D v6 hot end complete kit | 24V Direct, 1.75mm Universal DED00303

Description This complete v6 hotend kit - 1.75mm Universal (Direct) (24V) for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 24V
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00303
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€67.00

€54.47 Excl. 23% VAT

EU warehouse

Capricorn XS heat break liner, 2mm x 3mm (300mm)

Capricorn XS heat break liner, 2mm x 3mm (300mm) DBW00066

Description The Capricorn XS heat break liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heat breaks.

Specifications

Brand:	Capricorn	Length:	30 cm
Colour:	dark blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	3 mm
Inner diameter:	2 mm	Our item no:	DBW00066

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50 (coming soon)

€10.16 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2026 - 123-3d.ie