Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Customer reviews

Official Reviews.io

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

12V

E3D v6 hot end complete kit | 1.75mm 12V thermistor cartridge

E3D v6 hot end complete kit | 1.75mm 12V thermistor cartridge DED00076

Description This complete v6 hotend kit for your RepRap 3D printer contains all parts for the v6 hotend (1.75mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached.

The kit contains the following original parts:

E3D thermistor cartridge 100k Ohm Semitec
E3D aluminium heater block
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D aluminium heatsink
E3D silicone sock for v6 hotends ( 3 pieces!)
Fasteners

The kit contains the following compatible parts:

Axial fan 30 x 30 x 10mm 12V
Ceramic Heating Cartridge 12V 40W
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting:
#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00076
Max temp:	300 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€62.50 (coming soon)

€50.81 Excl. 23% VAT

E3D V6 Lite6 direct hot end kit, 1.75mm

E3D V6 Lite6 direct hot end kit, 1.75mm DED00045

Description The E3D lite hot end is the ideal hot end for standard 3D printing applications with PLA and ABS filament. The Lite6 is the little brother of the V6 and suitable for standard materials. Unlike the V6, Lite6's PTFE tube runs all the way through, so that it can easily be replaced in the event of a defect or jam.

Below are the main specs of the Lite6:

print speed of 20-50mm/s;
easy to use;
suitable for filament with a diameter of 1.75mm;
compatible with V6 nozzles, Volcano and Bowden systems;
maximum temperature 245°C (PLA & ABS).

The kit consists of the following original parts:

E3D heatsink with Bowden coupling (original)
E3D aluminium heater block (original)
E3D brass nozzle (0.4mm) (original)
E3D thermistor cartridge 100k Ohm Semitec (original)
E3D injection molded fan duct (colour: red)
E3D fasteners (original)
E3D silicone sock for V6 hot ends (original)
Ceramic heating element 12V/30W (original)
Axial fan 30 x 30 x 10mm 12V
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting: #TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Max operating temp:	245 °C
Filament diameter:	1.75 mm	Our item no:	DED00045

€57.00

€46.34 Excl. 23% VAT

EU warehouse

E3D V6 universal hot end 1.75mm (only metal parts)

E3D V6 universal hot end 1.75mm (only metal parts) DED00024

Description This kit contains only the metal hot end parts and is intended for users with some experience and/or in possession of their own parts. Electronic components and the PTFE tube are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hot end. The heatsink has an integrated Bowden coupling.

The kit contains the following components:

E3D V6 aluminium heatsink 1.75mm;
E3D V6 aluminium heater block;
E3D V6 heat break 1.75mm;
E3D V6 brass nozzle 1.75mm x 0.4mm;
E3D V6 spare fasteners;

This kit can be used in both a Bowden and a direct drive setup.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00024
Max operating temp:	400 °C

€45.50

€36.99 Excl. 23% VAT

EU warehouse

E3D V6 All-Metal hotend kit | 12V Bowden, 2.85mm

E3D V6 All-Metal hotend kit | 12V Bowden, 2.85mm DED00296

Description This complete V6 hotend kit (12V Bowden) for your 3D printer contains all parts for the v6 hotend (2.85mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic Heating Cartridge 12V
E3D v6 Bowden clutch 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00296
Filament diameter:	2.85 mm	Voltage:	12 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€71.00 (coming soon)

€57.72 Excl. 23% VAT

E3D V6 All-Metal hotend kit | 12V Direct Drive, 2.85mm

E3D V6 All-Metal hotend kit | 12V Direct Drive, 2.85mm DED00298

Description This complete V6 hotend kit (12V Direct Drive) for your 3D printer contains all parts for the v6 hotend (2.85 mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic Heating Cartridge 12V
E3D v6 Direct Drive coupling 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00298
Filament diameter:	2.85 mm	Voltage:	12 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€67.00 (coming soon)

€54.47 Excl. 23% VAT

E3D V6 Gold Edition hotend kit | 12V Bowden, 1.75mm

E3D V6 Gold Edition hotend kit | 12V Bowden, 1.75mm DED00300

Description The V6 Gold Edition HotEnd Kit 1.75mm 12V Bowden from E3D is suitable for high temperatures (maximum 285°C). Thanks to the gold-plated copper block, the heat transfer to the filament increases. This reduces the chance that filament residues will stick to the hotend. The brass nozzle is made of hardened steel. Do you print with carbon fiber, wood/metal filled filaments or even glow-in-the-dark filaments? Then these nozzles are ideal. The heating elements are precise and quick disconnect cartridges. The shortcuts allow you to remove the hotend easily.

This kit contains:

Gold anodized HeatSink 1.75mm
V6 HeatBreak 1.75mm
Hardened steel nozzle 1.75mm x 0.4mm
Thermistor cartridge
Thermistor extension cable
Heating cartridge 12V
30mm x 30mm x 10mm 12V
V6 clear fan duct
V6 mounting kit
V6 plated copper heating block
Capricorn tube 100mm
thermal paste
collet
collet clamp

Specifications

Brand:	E3D	Our item no:	DED00300
Filament diameter:	1.75 mm	Voltage:	12 v

€113.00

€91.87 Excl. 23% VAT

EU warehouse

E3D Plated Copper Volcano upgrade kit | 12V, 1.75mm

E3D Plated Copper Volcano upgrade kit | 12V, 1.75mm DED00283

Description The copper-plated E3D Volcano upgrade set improves the performance of a printer's hot end. Thanks to the copper plating, the hot end can easily be heated up to 285 Celsius with an expandability of up to 500 Celsius. An additional advantage of copper plating is that the heat conductivity is three times higher than that of brass. This means that the relative retention of heat is three times greater. This ensures that there is a more constant temperature, which promotes the flow of filament.

Kit includes copper plated heating pad, mounting kit, 0.8mm copper plated 1.75 nozzle, 30W standard 12v heating element, Thermistor cartridge along with extension lead, thermal paste and cable tie.

Specifications

Brand:	E3D	Our item no:	DED00283
Filament diameter:	1.75 mm	Voltage:	12 v
Material:	Copper

€87.00

€70.73 Excl. 23% VAT

EU warehouse

E3D Volcano upgrade kit | 12V, 1.75mm

E3D Volcano upgrade kit | 12V, 1.75mm DED00285

Description The Volcano 12V upgrade kit (1.75 mm) from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x 0.8mm brass Volcano nozzle

Specifications

Brand:	E3D	Our item no:	DED00285
Max temp:	285 °C	Voltage:	12 v

€37.50

€30.49 Excl. 23% VAT

EU warehouse

E3D Volcano Eruption upgrade kit | 12V, 1.75mm

E3D Volcano Eruption upgrade kit | 12V, 1.75mm DED00290

Description The Volcano Eruption upgrade kit 1.75 mm 12V from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x brass Volcano nozzles: 0.60/0.80/1.00/1.20mm

Specifications

Brand:	E3D	Our item no:	DED00290
Filament diameter:	1.75 mm	Voltage:	12 v
Max temp:	285 °C

€51.50

€41.87 Excl. 23% VAT

EU warehouse

E3D Volcano hotend kit | 12V Direct Drive, 1.75mm

E3D Volcano hotend kit | 12V Direct Drive, 1.75mm DED00294

Description The Volcano HotEnd kit 1.75 mm 12V Direct Drive from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm direct
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 12V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30mm x 30mm x 10mm fan 12V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Brand:	E3D	Our item no:	DED00294
Filament diameter:	1.75 mm	Voltage:	12 v
Max temp:	300 °C

€71.00 (coming soon)

€57.72 Excl. 23% VAT

E3D Volcano hotend kit | 12V, 1.75mm (with Bowden add-on)

E3D Volcano hotend kit | 12V, 1.75mm (with Bowden add-on) DED00292

Description The Volcano HotEnd kit 1.75 mm 12V (with bowden add-on) from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm bowden
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 12V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30 x 30 x 10 mm fan 12V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Brand:	E3D	Our item no:	DED00292
Filament diameter:	1.75 mm	Voltage:	12 v
Max temp:	300 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€75.00 (coming soon)

€60.98 Excl. 23% VAT

E3D Super Volcano upgrade kit | 12V, 1.75mm (1mm nozzle)

E3D Super Volcano upgrade kit | 12V, 1.75mm (1mm nozzle) DED00224

Description The E3D Super Volcano Upgrade Kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 12V, brass nozzle 1.75 mm, thermal paste and a mosfet with accompanying wiring.

Specifications

Brand:	E3D	Our item no:	DED00224
Filament diameter:	1.75 mm	Voltage:	12 v
Power rating:	80 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€153.50 (coming soon)

€124.80 Excl. 23% VAT

E3D Super Volcano upgrade starter kit | 12V, 1.75mm (.8mm, 1mm, 1.2mm, 1.4mm nozzle)

E3D Super Volcano upgrade starter kit | 12V, 1.75mm (.8mm, 1mm, 1.2mm, 1.4mm nozzle) DED00282

Description The E3D Super Volcano upgrade starter kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 12V, brass nozzle 1.75mm, thermal paste and a mosfet with accompanying wiring. This starter kit comes with an extra set of nozzles. These come in the sizes 0.8mm, 1.0mm, 1.2mm, 1.4mm.

Specifications

Brand:	E3D	Our item no:	DED00282
Filament diameter:	1.75 mm	Voltage:	12 v
Power rating:	80 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€169.00 (coming soon)

€137.40 Excl. 23% VAT

E3D Super Volcano upgrade kit | 12V, 2.85mm (1mm nozzle)

E3D Super Volcano upgrade kit | 12V, 2.85mm (1mm nozzle) DED00225

Description The E3D Super Volcano upgrade kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 12V, brass nozzle 2.85 mm, thermal paste and a mosfet with accompanying wiring.

Specifications

Brand:	E3D	Our item no:	DED00225
Filament diameter:	2.85 mm	Voltage:	12 v
Power rating:	80 W

€118.00

€95.93 Excl. 23% VAT

EU warehouse

E3D Super Volcano upgrade starter kit | 12V, 2.85mm (.8mm, 1mm, 1.2mm, 1.4mm nozzle)

E3D Super Volcano upgrade starter kit | 12V, 2.85mm (.8mm, 1mm, 1.2mm, 1.4mm nozzle) DED00226

Description The E3D Super Volcano upgrade kit is a kit intended for the print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the Thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a SuperVolcano sock, 80Watt heater cartridge 12V, Brass nozzle 2.85mm, thermal paste and a mosfet with accompanying wiring. The starter kit comes with an extra set of nozzles. These come in sizes 0.8mm, 1.0mm, 1.2mm, 1.4mm.

Specifications

Brand:	E3D	Our item no:	DED00226
Filament diameter:	2.85 mm	Voltage:	12 v
Power rating:	80 W

€159.00

€129.27 Excl. 23% VAT

EU warehouse

E3D V6 silicone sock pro for hot ends (3-pack)

E3D V6 silicone sock pro for hot ends (3-pack) DED00072

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Brand:	E3D	Our item no:	DED00072
Colour:	blue

€6.00

€4.88 Excl. 23% VAT

In stock

E3D Prusa V6 MK2 HotEnd kit 12V

E3D Prusa V6 MK2 HotEnd kit 12V DED00254

Description The E3D Prusa V6 mk2 is a 12 volt Prusa compatible hot end. Thanks in part to the 40W heater cartridge, the V6 hot end is able to print at temperatures up to 300ᵒC. The kit includes a 40W 12 volt heater and thermistor cartridge, an aluminum V6 heater block, an aluminum heatbrake and a collet with collet clip.

Specifications

Brand:	E3D	Power rating:	40 W
Filament diameter:	1.75 mm	Our item no:	DED00254
Max temp:	300 °C	Voltage:	12 v
Nozzle diameter:	0.4 mm

€81.00

€65.85 Excl. 23% VAT

EU warehouse

E3D V6 Chimera+ extruder kit | 12V, 1.75mm

E3D V6 Chimera+ extruder kit | 12V, 1.75mm DED00146

Description The E3D Chimera+ is a 12V air-cooled 2-in, 2-out extruder kit. This set is only for 1.75mm Bowden printers. The nozzles can be individually adjusted in height and temperature.

The kit contains the following parts:

2 x E3D blue plastic collet clips.
2 x E3D black plastic collets.
2 x E3D silicone sock.
2 x E3D v6 nozzle brass 1.75mm x 0.40mm.
2 x E3D v6 heater block.
2 x E3D heater cartridge 12V 30W.
2 x E3D thermistor cartridge.
E3D air-cooled heatsink.
800mm PTFE Bowden tube.
12V 30 x 30 x 10mm fan.
Thermal paste.
Mounting kit.

You can view the technical specifications here.

Specifications

Brand:	E3D	Our item no:	DED00146
Filament diameter:	1.75 mm	Voltage:	12 v
Nozzle diameter:	0.4 mm

€153.00

€124.39 Excl. 23% VAT

EU warehouse

E3D V6 Cyclops+ extruder kit | 12V, 1.75mm

E3D V6 Cyclops+ extruder kit | 12V, 1.75mm DED00147

Description The E3D Cyclops+ is a 12V air-cooled 2-in, 1-out extruder kit. This set is only for 1.75mm Bowden printers. The 2 in, 1 out method makes this kit easier to set up than a 2 in, 2 out setup. Because this kit only uses 1 nozzle, you will never have problems with a leaking second nozzle.

The kit contains the following parts:

E3D air-cooled heatsink.
2 x E3D black plastic collets.
2 x E3D blue plastic collet clips.
Cyclops+ mounting kit.
80cm PTFE Bowden tube.
12V 30 x 30 x 10mm fan.
E3D v6 brass nozzle 1.75mm x 0.40mm.
E3D Cyclops heater block.
2 x E3D Kraken heat breaks.
Thermal paste.
E3D heater cartridge 12V 30W.
E3D thermistor cartridge.

You can view the technical specifications here.

Specifications

Brand:	E3D	Our item no:	DED00147
Filament diameter:	1.75 mm	Voltage:	12 v
Nozzle diameter:	0.4 mm

€137.00

€111.38 Excl. 23% VAT

EU warehouse

Heaterblock insulation cotton

Heaterblock insulation cotton DVB00017

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Brand:	123-3D	Our item no:	DVB00017
Dimensions:	75 x 21 mm	Thickness:	3 mm

€1.35

€1.10 Excl. 23% VAT

In stock

E3D V6 Lite6 direct hot end kit | 12V 1.75mm

E3D V6 Lite6 direct hot end kit | 12V 1.75mm DED00160

Description This set contains the following products:
- E3D Lite - Heatsink 1.75mm
- E3D V6 - Heater block including spare fixings (cartridge version)
- E3D V6 - Brass nozzle - 0.40mm /1.75mm
- E3D Axial fan 30 x 30 x 10mm (12V)
- E3D V6 - Red injection molded fan duct
- E3D V6 - Embedded Bowden plug fitting (1.75mm)
- E3D Thermistor cartridge + cable
- E3D Ceramic heater cartridge 12V/30W (100cm)
- E3D V6 - Blue silicone sock

Specifications

Brand:	E3D	Max operating temp:	245 °C
Filament diameter:	1.75 mm	Our item no:	DED00160

€31.50

€25.61 Excl. 23% VAT

EU warehouse

E3D v6 hotend kit | 12V Direct, 1.75mm Universal

E3D v6 hotend kit | 12V Direct, 1.75mm Universal DED00302

Description This complete v6 hotend kit - 1.75mm Universal (Direct) (12V) for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 12V
PTFE tube, 10 cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00302
Filament diameter:	1.75 mm	Voltage:	12 v
Max temp:	300 °C

€67.00

€54.47 Excl. 23% VAT

EU warehouse

E3D v6 hot end complete kit | 12V, 1.75mm Universal (with Bowden add-on)

E3D v6 hot end complete kit | 12V, 1.75mm Universal (with Bowden add-on) DED00304

Description This complete v6 hot end complete kit - 1.75mm Universal (with Bowden add-on) (12V) from E3D for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 12V
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00304
Filament diameter:	1.75 mm	Voltage:	12 v
Max temp:	300 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€71.00 (coming soon)

€57.72 Excl. 23% VAT

E3D v6 upgrade kit heaterblock & silicone sock

E3D v6 upgrade kit heaterblock & silicone sock DED00250

Description This v6 aluminum heater block kit allows you to upgrade an old style clamp mount block for use with cartridge thermistors. Supplied with an M3 set screw for the thermistor cartridge and an M3 button head screw to clamp the heater cartridge.

This kit includes;

1 x V6 aluminum heater block
1 x V6 Standard Sock
1 x Thermistor Cartridge
1 x thermistor extension cable
1 x V6 mounting kit

Specifications

Brand:	E3D	Our item no:	DED00250
Max temp:	285 °C

€24.50

€19.92 Excl. 23% VAT

In stock

Capricorn XS heat break liner, 2mm x 3mm (300mm)

Capricorn XS heat break liner, 2mm x 3mm (300mm) DBW00066

Description The Capricorn XS heat break liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heat breaks.

Specifications

Brand:	Capricorn	Length:	30 cm
Colour:	dark blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	3 mm
Inner diameter:	2 mm	Our item no:	DBW00066

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50 (coming soon)

€10.16 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2026 - 123-3d.ie