Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

3mm

E3D brass Volcano nozzle, 2.8mm x 0.4mm

E3D brass Volcano nozzle, 2.8mm x 0.4mm DED00048

Description This E3D volcano nozzle has an opening of 0.4mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00048
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 2.85mm x 0.8mm

E3D brass Volcano nozzle, 2.85mm x 0.8mm DED00038

Description This E3D volcano nozzle has an opening of 0.8mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DED00038
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 2.85mm x 1mm

E3D brass Volcano nozzle, 2.85mm x 1mm DED00039

Description This E3D volcano nozzle has a 1mm opening, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	2.85 mm	Our item no:	DED00039
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 2.85mm x 1.2mm

E3D brass Volcano nozzle, 2.85mm x 1.2mm DED00040

Description This E3D volcano nozzle has an opening of 1.2mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	2.85 mm	Our item no:	DED00040
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this today!

€8.25

€6.71 Excl. 23% VAT

In stock

E3D Volcano hardened steel nozzle, 2.85mm x 0.40mm

E3D Volcano hardened steel nozzle, 2.85mm x 0.40mm DED00066

Description The replacement V6 nozzle for Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for highly specialised materials, where a standard brass nozzle runs the risk of corroding. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm and is suitable for filament with a diameter of 2.85mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00066
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D Volcano hardened steel nozzle, 2.85mm x 0.60mm

E3D Volcano hardened steel nozzle, 2.85mm x 0.60mm DED00067

Description This replacement V6 nozzle for the Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.6mm and is suitable for filament with a diameter of 0.6mm

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DED00067
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D Volcano hardened steel nozzle, 2.85mm x 1.20mm

E3D Volcano hardened steel nozzle, 2.85mm x 1.20mm DED00068

Description This replacement V6 nozzle for the Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 1.2mm and is suitable for filament with a diameter of 2.85mm

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	2.85 mm	Our item no:	DED00068
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D Volcano copper nozzle, 2.85mm x 0.40mm

E3D Volcano copper nozzle, 2.85mm x 0.40mm DED00128

Description This E3D Volcano nozzle has an opening of 0.4mm and is ideal for printing tall layers with 1.75mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00128
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

E3D Volcano copper nozzle, 2.85mm x 0.80mm

E3D Volcano copper nozzle, 2.85mm x 0.80mm DED00130

Description This E3D Volcano nozzle has an opening of 0.8mm and is ideal for printing tall layers with 2.85mm filament. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DED00130
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

E3D Volcano silicone sock (3-pack)

E3D Volcano silicone sock (3-pack) DED00244

Description Give your hot end an upgrade with this Volcano silicone sock for E3D or other volcano style hot ends.

Prevent heat loss and prevent filament residues from sticking to your heater block with this heat-resistant silicone sock. In addition, the temperature is more stable, so you can also print 'bridges' or 'overhangs' of a higher quality. After attaching the sock, it adapts to the heater block. Suitable for nozzles with a diameter of 0.4 mm to 1.2 mm.

The sock has a lifespan of 100+ hours and is in a pack of 3.

Specifications

Brand:	E3D	Material:	Silicone
Colour:	orange	Our item no:	DED00244

Order now, we can ship this today!

€10.00

€8.13 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85 x 0.40mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85 x 0.40mm DMS00072

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DMS00072
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.6mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.6mm DMS00073

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DMS00073
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.8mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.8mm DMS00074

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DMS00074
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

Order now, we can ship this today!

€19.50

€15.85 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 1mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 1mm DMS00075

Description The Micro Swiss brass nozzle is suitable for the Volcano hot end and is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 1mm.

Compatible with the following printers and parts:
	●	Printers with an E3D Volcano hot end (3mm filament)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	1 mm
Filament diameter:	2.85 mm	Our item no:	DMS00075
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.25mm

Micro Swiss brass coated nozzle for E3D Volcano hotend | 2.85mm x 0.25mm DMS00107

Description The Micro Swiss Brass Volcano nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.25mm.

Compatible with the following printers and parts:

Printers with an E3D Volcano hotend (2.85mm filament)
Artillery Sidewinder X1

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.25 mm
Filament diameter:	2.85 mm	Our item no:	DMS00107
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm DAR00946

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00946
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this today!

€55.00

€44.72 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm DAR00947

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00947
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00

€44.72 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm DAR00948

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00948
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this today!

€55.00

€44.72 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm DAR00949

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00949
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00

€44.72 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack) DAR00959

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Our item no:	DAR00959
Filament diameter:	1.75 mm	Quantity:	4
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€193.00

€156.91 Excl. 23% VAT

EU warehouse

Oscar3D ECO Volcano ruby nozzle, 2.85mm x 0.40mm

Oscar3D ECO Volcano ruby nozzle, 2.85mm x 0.40mm DOS00015

Description The Oscar3D ECO Volcano red ruby nozzle is ideal for robust and stable printing results. Thanks to the wide, flat tip, a perfectly smooth surface is achieved. The built-in ruby, one of the sturdiest materials in the world, ensures that the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.4mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DOS00015
Material:	Brass + red ruby	Screwthread type:	M6
Nozzle coating:	none

€93.00

€75.61 Excl. 23% VAT

EU warehouse

Oscar3D ECO Volcano ruby nozzle, 2.85mm x 0.60mm

Oscar3D ECO Volcano ruby nozzle, 2.85mm x 0.60mm DOS00016

Description The Oscar3D ECO Volcano red ruby nozzle is ideal for robust and stable printing results. Thanks to the wide, flat tip, a perfectly smooth surface is achieved. The built-in ruby, one of the sturdiest materials in the world, ensures that the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.6mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DOS00016
Material:	Brass + red ruby	Screwthread type:	M6
Nozzle coating:	none

This product is end of life.

Oscar3D VARIO Volcano ruby nozzle, 2.85mm x 0.60mm

Oscar3D VARIO Volcano ruby nozzle, 2.85mm x 0.60mm DOS00022

Description The Oscar3D VARIO Volcano red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.6mm. You can use the nozzle in combination with an E3D Volcano heater block.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DOS00022
Material:	Brass + red ruby	Screwthread type:	M6
Nozzle coating:	none

€93.00

€75.61 Excl. 23% VAT

EU warehouse

E3D V6 Volcano heater block cartridge

E3D V6 Volcano heater block cartridge DED00133

Description With this heater block it is possible to print even faster. This Volcano heater block is suitable for E3D thermistor cartridges. Due to the longer melting range of the Volcano series, the filament will melt well at higher speeds. The Volcano upgrade is especially suitable for larger nozzle diameters. The mounting materials are included with this original product.

Specifications

Brand:

E3D

Our item no:

DED00133

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D copper Volcano heater block with mounting (cartridge sensor version)

E3D copper Volcano heater block with mounting (cartridge sensor version) DED00216

Description This E3D Volcano Copper Plated Heater block with mounting kit (cartridge sensor version) has been developed for high temperatures. This makes it possible to print materials such as Nylon, Polycarbocate and Peek, regular materials such as PLA and ABS are also still suitable for printing with this high-quality Volcano hot end.

This set can also be combined with the PT100 upgrade kit from E3D, allowing an even higher accuracy in temperature detection.

The kit contains the following parts:

Volcano copper plated heater block
V6 mounting kit

Compatible with all Volcano Nozzles and all E3D HotEnds except Cyclops.

Specifications

Brand:	E3D	Our item no:	DED00216
Material:	Copper

€45.50

€36.99 Excl. 23% VAT

EU warehouse

Heaterblock insulation cotton

Heaterblock insulation cotton DVB00017

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Brand:	123-3D	Our item no:	DVB00017
Dimensions:	75 x 21 mm	Thickness:	3 mm

Order now, we can ship this today!

€1.35

€1.10 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

© 2025 - 123-3d.ie