E3D Super Volcano

Compatible with the following parts:

E3D - Super Volcano Block & Sock

E3D - Super Volcano Kit 12V 1,75mm

E3D - Super Volcano MultiKit 24V 1,75mm

E3D - Super Volcano Kit 24V 1,75mm

Description The E3D Super Volcano block is made of nickel-plated copper and has an 11x higher volume flow rate than the standard E3D V6 hot end. The Super Volcano is part of the E3D ecosystem allowing it to be used with the V6 or Kraken heatbreaks and our Lite6 integrated heatsink and heatbreak.

Because the Super Volcano blocks are designed for the special 80W heating elements, this gives an ultimate performance at high print temperatures of up to 300°C. The supplied fibreglass sleeving replaces the commonly used silicone sock.

This set contains the following original parts:

Super Volcano Block
Fibreglass sleeving
Fasteners

The Super Volcano mounting manual can be found here.

Specifications

Brand:	E3D	Material:	Copper
Manual:	Download	Our item no:	DED00163

€117.50

€95.53 Excl. 23% VAT

EU warehouse

E3D Super Volcano ceramic heater cartridge | 12V, 80W | 100cm

Zoom in

Description With this original E3D 12V ceramic heating element for the Super Volcano you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

NB! This heater cartridge can use a maximum of 8A. Do not connect it directly to your electronics. Use the supplied MOSFET module.

For connection, please refer to the E3D Super Volcano Assembly.

Specifications

Brand:	E3D	Outer diameter:	6 mm
Cable length:	100 cm	Power rating:	80 W
Cartridge length:	47.5 mm	Our item no:	DED00161
Colour:	black	Voltage:	12 v
Max current:	8 A

€21.75

€17.68 Excl. 23% VAT

EU warehouse

E3D Super Volcano hardened steel nozzle, 1.75mm x 1.20mm

Zoom in

Description The hardened steel E3D Super Volcano nozzle is extremely suitable for printing special filaments such as carbon, metal, wood and glow-in-the-dark. This nozzle achieves very high throughput and printing speeds thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.20mm.

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	1.75 mm	Our item no:	DED00177
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Super Volcano hardened steel nozzle, 1.75mm x 1.40mm

Zoom in

Specifications

Brand:	E3D	Nozzle diameter:	1.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00178
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Super Volcano hardened steel nozzle, 2.85mm x 1.00mm

Zoom in

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	2.85 mm	Our item no:	DED00181
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

1 mm

1.4 mm

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Super Volcano hardened steel nozzle, 2.85mm x 1.40mm

Zoom in

Specifications

Brand:	E3D	Nozzle diameter:	1.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00183
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

1 mm

1.4 mm

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Super Volcano copper nozzle, 1.75mm x 1.40mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing tall layers. The nozzle is made of copper alloy for optimum thermal properties. Copper will conduct heat 3x better than brass. The alloy makes it possible to heat even above 500°C without softening the metal of the nozzle.

The high-quality copper nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.40mm.

Specifications

Brand:	E3D	Nozzle diameter:	1.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00188
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Super Volcano brass nozzle, 1.75mm x 1.40mm

Zoom in

Description This E3D Super Volcano nozzle is ideal for printing large layer heights. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 1.4mm.

Specifications

Brand:	E3D	Nozzle diameter:	1.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00168
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D Super Volcano brass nozzle, 2.85mm x 0.60mm

Zoom in