Temperature regulation

E3D heater cartridge | 12V, 30W DED00142

Description With this original ceramic E3D 12V heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	30 W
Cable length:	100 cm	Our item no:	DED00142
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D heater cartridge | 12V, 40W

Zoom in

Description With this original E3D 12V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00259
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

Order now, we can ship this today!

€15.00

€12.20 Excl. 23% VAT

In stock

E3D heater cartridge | 24V, 40W

Zoom in

Description With this original E3D 24V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00260
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

Order now, we can ship this today!

€14.00

€11.38 Excl. 23% VAT

In stock

E3D high precision ceramic heater cartridge | 24V, 40W

Zoom in

Description This E3D high precision heater cartridge of 24 volts/40 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hotends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00262
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

€24.75

€20.12 Excl. 23% VAT

EU warehouse

E3D high temperature ceramic heater cartridge | 12V, 65W

Zoom in

Description This E3D high temperature heater cartridge of 12 volts/65 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm.

The heater cartridge is capable of reaching temperatures of no less than 550°C, which means that a copper heater block is required.

In combination with the E3D copper Nozzle or E3D Nozzle X you have a hotend that is ideal for filaments such as PEEK or PEI.

Specifications

Brand:	E3D	Max operating temp:	550 °C
Cable length:	200 cm	Power rating:	65 W
Cartridge diameter:	6 mm	Our item no:	DED00263
Cartridge length:	20 mm	Voltage:	12 v

€97.50

€79.27 Excl. 23% VAT

EU warehouse

E3D high temperature ceramic heater cartridge | 24V, 65W

Zoom in

Description This 24 volt/65 watt E3D high temperature heater cartridge is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm.

The heater cartridge is capable of reaching temperatures of no less than 550°C, which means that a copper heater block is required.

In combination with the E3D copper Nozzle or E3D Nozzle X you have a hotend that is ideal for filaments such as PEEK or PEI.

Specifications

Brand:	E3D	Max operating temp:	550 °C
Cable length:	200 cm	Power rating:	65 W
Cartridge diameter:	6 mm	Our item no:	DED00264
Cartridge length:	20 mm	Voltage:	24 v

€97.50

€79.27 Excl. 23% VAT

EU warehouse

E3D Super Volcano ceramic heater cartridge | 12V, 80W | 100cm

Zoom in

Description With this original E3D 12V ceramic heating element for the Super Volcano you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

NB! This heater cartridge can use a maximum of 8A. Do not connect it directly to your electronics. Use the supplied MOSFET module.

For connection, please refer to the E3D Super Volcano Assembly.

Specifications

Brand:	E3D	Outer diameter:	6 mm
Cable length:	100 cm	Power rating:	80 W
Cartridge length:	47.5 mm	Our item no:	DED00161
Colour:	black	Voltage:	12 v
Max current:	8 A

€21.75

€17.68 Excl. 23% VAT

EU warehouse

E3D PT1000 Temperature Sensor

Zoom in

Description The E3D PT1000 Temperature sensor is a meter that can accurately detect temperatures up to 500°C. The PT1000 is also equipped with a 50mm long black cable and a Molex Microfit 3.0 connection. Additionally, the cartridge is supplied with a 1 meter extension cable.

Specifications

Brand:	E3D	Cartridge length:	15 mm
Cable length:	50 cm	Heatbed max temp:	500 °C
Cartridge diameter:	3 mm	Our item no:	DED00265

Order now, we can ship this today!

€19.50

€15.85 Excl. 23% VAT

In stock

E3D thermistor cartridge

Zoom in

Description The E3D Thermistor Cartridge is an easy to attach thermistor cartridge for the E3D V6 heaterblocks. The cartridge contains the Semitec 104GT thermistor. The cartridge housing is made of copper and the thermistor is secured with a high quality thermally conductive ceramic adhesive.

The cartridge comes with a cable with connector.

For the Marlin firmware you need the following setting:
#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Max temp:	280 °C
Cable length:	100 cm	Our item no:	DED00069
Diameter:	3 mm

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D fibreglass sleeve, 9cm

Zoom in

Description This piece of fibreglass insulation sleeving is suitable for thin wire. The outer diameter of the sleeving is 1mm and the inner diameter is 0.25mm.

Specifications

Brand:	E3D	Outer diameter:	1 mm
Inner diameter:	0.2 mm	Our item no:	DED00073
Length:	9 cm

€2.75

€2.24 Excl. 23% VAT

EU warehouse

E3D Thermal Paste, 1 gram

Zoom in

Description Thermal paste improves the thermal transition from the warm to the cold part of the heatbreak. By using thermal paste, the risk of clogging (the softening of the filament in the heatbreak too early) is considerably reduced.

The composition of the paste is as follows: 50% silicone, 20% carbon, 30% metal oxide.

Specifications

Amount:	0.001 kg	Our item no:	DED00085
Brand:	E3D	Weight:	0.003 kg
Safety datasheet:	Safety Information

Order now, we can ship this today!

€2.75

€2.24 Excl. 23% VAT

In stock

E3D PT100 upgrade kit

Zoom in

Description This E3D PT100 upgrade kit is ideal if you want to print special materials that have to be printed at high temperatures. The PT100 sensor from E3D can accurately read temperatures up to 400°C. This set also includes the E3D PT100 Amplifier Board to connect the E3D PT100 sensor to your existing printer electronics.

To use this set, you need to change the temperature sensor type to type 20 in the Marlin firmware.

Specifications

Brand:

E3D

Our item no:

DED00157

€39.50

€32.11 Excl. 23% VAT

EU warehouse

E3D PT100 sensor cartridge

Zoom in

Description This E3D PT100 sensor cartridge has a 10cm cable with a molex connector. This sensor comes with a molex to dupont cable of 80cm. With an E3D PT100 temperature sensor you can very precisely measure high temperatures up to 400°C. The cartridge has a diameter of 3mm and a length of 15.5mm, making it suitable for use in the E3D V6, Chimera, Lite6 and the Kraken if a heater block is used that is suitable for a sensor cartridge.

The E3D PT100 sensor is not the same as a thermistor. If your electronics are not suitable for the PT100 sensor, you can use the E3D PT100 Amplifier Board .

Specifications

Brand:	E3D	Cartridge length:	15.5 mm
Cable length:	80 cm	Our item no:	DED00155
Cartridge diameter:	3 mm

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D PT100 Amplifier Board

Zoom in

Description This E3D PT100 Amplifier Board allows you to use the E3D PT100 sensor on your 3D Printer electronics. The board amplifies the signal from the PT100 sensor and converts it into a readable signal for your electronics. For correct operation in the Marlin firmware, specify the temperature sensor type 20.

The official E3D documentation can be found here.

Specifications

Brand:	E3D	Our item no:	DED00156
Dimensions:	38 x 28 mm	Thickness:	1.5 mm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

E3D axial fan, 30mm x 30mm x 10mm

Zoom in

Description This small 12V DC cooling fan actively cools electronics, such as the extruder of the 3D printer. The fan has a size of 30mm x 30mm x 10mm.

This is the original fan that comes with the E3D lite kits.

Specifications

Brand:	E3D	Dimensions:	10 x 30 x 30 mm
Cable length:	95 cm	Our item no:	DED00134
Current rating:	0.1 A	Voltage:	12 v
Fan type:	axial

Order now, we can ship this today!

€9.50

€7.72 Excl. 23% VAT

In stock

E3D axial fan, 30mm x 30mm x 10mm

Zoom in

Description This small 24V DC cooling fan actively cools electronics, such as the extruder of the 3D printer. The fan has a size of 30mm x 30mm x 10mm. The fan has a connector connection and a cable of 100cm.

This is the original fan that comes with the E3D lite kits.

Specifications

Brand:	E3D	Dimensions:	10 x 30 x 30 mm
Cable length:	100 cm	Our item no:	DED00135
Current rating:	0.08 A	Voltage:	24 v
Fan type:	axial

Order now, we can ship this today!

€9.50

€7.72 Excl. 23% VAT

In stock

External thermocouple board v1.2

Zoom in

Description This external thermocouple board is compatible with various electronics (including Megatronics and Ramps) and offers a solution when performing extra temperature measurements.

NOTE: An analog input must be free to connect the thermocouple board.

Advantages:

Easy to install
Very small design (25mm x 25mm)
Compatible with Megatronics and RAMPS.

Specifications

Brand:	123-3D	Our item no:	DRW00053
Dimensions:	12 x 25 x 25 mm

€13.25

€10.77 Excl. 23% VAT

EU warehouse

Heaterblock insulation cotton

Zoom in

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Brand:	123-3D	Our item no:	DVB00017
Dimensions:	75 x 21 mm	Thickness:	3 mm

Order now, we can ship this today!

€1.35

€1.10 Excl. 23% VAT

In stock

Thermocouple type K cartridge, 1m

Zoom in

Description With the thermocouple type K cartridge you can achieve very accurate temperature measurements. The cable is 1 metre long and equipped with fork terminals for easy connection. The cartridge has a diameter of 3mm and a length of 15mm. The thermocouple is compatible with the cartridge heater block from E3D.

Note: the thermocouple type K must be supported by the electronics of the 3D printer.

Specifications

Brand:	123-3D	Length:	1 m
Cartridge diameter:	3 mm	Our item no:	DTH00006
Cartridge length:	15 mm	Thermocouple type:	thermocouple type k

€14.50

€11.79 Excl. 23% VAT

EU warehouse

Axial fan, 30mm x 30mm x 10mm

Zoom in

Description This small 12V DC cooling fan actively cools electronics, such as the extruder of the 3D printer. The fan has a size of 30mm x 30mm x 10mm.

Specifications

Brand:	123-3D	Fan type:	axial
Cable length:	95 cm	Dimensions:	10 x 30 x 30 mm
Connector A:	Molex 2 pin female	Our item no:	DMO00006
Current consumption:	60 ma	Voltage:	12 v

Order now, we can ship this today!

€4.05

€3.29 Excl. 23% VAT

In stock

Axial fan 24V, 30mm x 30mm x 10mm

Zoom in

Description This small 24V DC cooling fan actively cools electronics. The fan is, among other things, very suitable for the extruder of a 3D printer. The fan has a size of 30mm x 30mm x 10mm.

Specifications

Brand:	123-3D	Fan type:	axial
Cable length:	95 cm	Dimensions:	10 x 30 x 30 mm
Connector A:	Molex 2 pin female	Our item no:	DMO00022
Current consumption:	80 ma	Voltage:	24 v

Order now, we can ship this today!

€4.65

€3.78 Excl. 23% VAT

In stock

Ceramic heater cartridge | 12V, 40W | 100cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.
Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Colour:	red
Cable length:	100 cm	Power rating:	40 W
Cartridge diameter:	6 mm	Our item no:	DTH00018
Cartridge length:	23 mm	Voltage:	12 v

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge | 12V, 40W | 150cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 150cm.

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.

Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Power rating:	40 W
Cable length:	150 cm	Our item no:	DTH00007
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	23 mm

Order now, we can ship this today!

€6.50

€5.28 Excl. 23% VAT

In stock

Ceramic heater cartridge | 12V, 40W | 200cm

Zoom in

Description With this 123-3D ceramic heating element, your hot end will heat up in no time!

Are you planning to upgrade the hot end of your 3D printer or to build a 3D printer yourself? Then this ceramic heater cartridge is the right choice! The heating element has a maximum power of 40W and is compatible with most extruders.

The total cable length is 200cm.

Specifications

AWG:	22 awg	Outer diameter:	6 mm
Brand:	123-3D	Power rating:	40 W
Cable length:	200 cm	Our item no:	DTH00020
Colour:	red	Tolerance:	10
Current rating:	3.33 A	Voltage:	12 v
Length:	20 mm

€8.75

€7.11 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Temperature regulation

Popular products