Creality 3D CR-10 max nozzles

Creality M6x.75 brass nozzle, 0.20mm (123-3D version)

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.2mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR00295
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.30mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.3mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DAR00296
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.40mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.4mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00297
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

In stock

Creality M6x.75 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.5mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DAR00298
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.60mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.6mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00299
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

In stock

Creality M6x.75 brass nozzle, 0.80mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 x.75 thread and has an opening of 0.8mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00300
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

In stock

Brass coated nozzle | 1.75mm x 0.4mm (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has an opening of 0.4mm and is equipped with M6 x 0.75mm screw thread. MK8 nozzles are slightly shorter than the older MK7 version.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMK00033
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers: