AMS

Bambu Lab AMS Lite - Automatic Material System

Description Discover a world of possibilities with the AMS lite, the multi-material system from Bambu Lab. This allows printing with multiple colours or materials at the same time. The system can also serve as an automatic filament backup.

User friendly
The automatic filament backup loads a new spool when the old spool is empty. This way the printing process is not interrupted and the spool does not have to be changed manually. Since more different materials can be used at the same time, it is also possible to print supports with a different material. This can make it easier to remove supports, for example by using a soluble filament.

The improved compatibility makes it possible to use not only Bambu Lab coils, but also cardboard coils or coils from other brands. The design makes it easy to work with the AMS lite. The transparent housing makes it extra easy to detect and solve problems.

Please note: Filaments that are too soft, brittle or abrasive cannot be used with the AMS lite.

Specifications

Brand:	Bambu Lab	Our item no:	DAR02070
Filament diameter:	1.75 mm	Weight:	1.6 kg
Dimensions:	342 x 208 x 397 mm

€289.50

€235.37 Excl. 23% VAT

EU warehouse

Bambu Lab AMS - Automatic Material System

Zoom in

Description Open a world of new, creative possibilities with Bambu Lab AMS. This makes it possible to print with different colours and materials. This allows you to easily print supports from fragile or soluble material, so you have to spend less time on post-processing.

Intelligent system
The AMS uses an intelligent system including a 32-bit MCU and a smart algorithm. It detects when the filament runs out and has a filament backup system. This system ensures a smooth transition to a new spool, allowing the 3D printer to continue printing undisturbed. This way you can print much easier and more efficiently and no unused filament remains on the spool.

The AMS also detects whether the filament has become tangled. At that point it will stop printing so you can solve the problem. By using Bambu Lab filaments, the AMS can identify which rolls of filament you have added. For filaments that are not from Bambu Lab, it is necessary to manually enter which filaments they are in Bambu Studio.

Always dry
The housing is airtight and absorbs moisture by means of a desiccant. A humidity sensor monitors the humidity in the AMS and gives you a signal when it is too high or when the desiccant needs to be replaced. This keeps your filament dry and always in optimal condition for good prints.

Up to 16 colours
If you want to print with more than 4 different materials or colours, you can do this by connecting multiple AMS. By using an AMS hub, you can print up to 16 colours and different filaments at the same time. Please note: you do not receive this hub as standard.

Compatibility
Bambu Lab X1 series
Bambu Lab P1 series

Specifications

Brand:	Bambu Lab	Our item no:	DAR01228
Filament diameter:	1.75 mm	Weight:	2.5 kg
Dimensions:	224 x 368 x 283 mm

Order now, we can ship this today!

€410.00

€333.33 Excl. 23% VAT

In stock

Bambu Lab AMS Hub

Zoom in

Description The AMS Hub is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit (4 channels) to a maximum of 4 AMS units (16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01286

€70.50

€57.32 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Active Extrusion Wheel Assembly

Zoom in

Description The Active Extrusion Wheel Assembly from Bambu Lab is a friction wheel to actively drive filament forward. This construction works with the Bambu Lab AMS. This product is suitable for the X1 and P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01280

€17.50

€14.23 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Active Support Shaft Assembly

Zoom in

Description The Bambu Lab AMS Active Support Shaft Assembly is a rod for supporting rolls of filament. The rod also actively helps to drive a coil. Suitable for the AMS from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01281

€9.50

€7.72 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Bottom Cap

Zoom in

Description This AMS Bottom Cover from Bambu Lab is an original replacement part for the bottom of your Bambu Lab AMS. Suitable for the AMS from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01282

€75.50

€61.38 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Driven Support Shaft Assembly

Zoom in

Description The Bambu Lab AMS Driven Support Shaft Assembly is a roller that supports a filament spool. Suitable for the AMS from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01283

€8.50

€6.91 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Feeding Funnel

Zoom in

Description Bambu Lab's AMS Feeding Funnel is the inner part of the AMS First Stage Feeder. When the sensor detects filament insertion, the AMS feeder will automatically pull the filament forward. If the filament feeding is abnormal, the sensor will identify it and send the information back to the 3D printer.

Please Note: Please check the version of your AMS mainboard on the Bambu Lab Wiki before purchasing a new Bambu Lab AMS Feeding Funnel.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01284

€12.50

€10.16 Excl. 23% VAT

EU warehouse

Bambu Lab AMS First Stage Feeder

Zoom in

Description The AMS First Stage Feeder is specially designed to support the AMS for printing multiple colours and materials.

Each AMS has 4 first stage feeders, and each first stage feeder has its own motor and gears to actively push the filament forward or wind it back to the spool.

The first stage feeder has a sensor to detect filament. When a filament is inserted, the first stage feeder will pull the filament automatically. When a filament needs to be winded back, the first stage feeder will drive the AMS driving sleeve to rotate the spool for filament winding.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01285

Order now, we can ship this today!

€59.50

€48.37 Excl. 23% VAT

In stock

Bambu Lab AMS Internal Hub Unit

Zoom in

Description The AMS Internal Hub Unit is specially designed for Bambu AMS. The AMS internal hub unit is used to select particular filaments in AMS and convey filaments from AMS to the printer. It also has the functions of speed measurement (filament conveyance) and filament detection.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01287

€79.50 (coming soon)

€64.63 Excl. 23% VAT

Bambu Lab AMS Internal Hub Motor

Zoom in

Description The AMS Internal Hub Motor is used to provide energy for the operation of the AMS internal hub unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01288

Order now, we can ship this today!

€59.50

€48.37 Excl. 23% VAT

In stock

Bambu Lab PTFE tube connector (3-pack)

Zoom in

Description The PTFE Tube Connector is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool head.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01339

Order now, we can ship this today!

€7.50

€6.10 Excl. 23% VAT

In stock

Bambu Lab A1 Series and AMS lite Screws Kit

Zoom in

Description This Bambu Lab Screws Kit contains the most common screws for the A1 series 3D printers and AMS lite from Bambu Lab. This product contains the following parts:

10 x M2x2.5 FHCS (Machine Screw)
10 x M2.5x5 FHCS (Machine Screw)
20 x BT2x5 SHCS (Self Tapping Screw)
10 x BT2.6x5 SHCS (Self Tapping Screw)
20 x BT2.3x7 SHCS (Self Tapping Screw)
10 x BT2x8 SHCS (Self Tapping Screw)
5 x BT2.6x14 SHCS (Self Tapping Screw)
10 x Stainless Steel Flat Washer
10 x BT2.6x8 SHCS (Self Tapping Screw)
10 x BT3x8 SHCS (Self Tapping Screw)
10 x BT3x12 SHCS (Self Tapping Screw)
5 x M3x12 FHCS (Machine Screw)
20 x BT2x13 SHCS (Self Tapping Screw)
5 x 0.9x11 mm Helical Compression Spring

Specifications

Brand:

Bambu Lab

Our item no:

DAR01993

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this today!

€12.50

€10.16 Excl. 23% VAT

In stock

Bambu Lab AMS lite Filament Hub

Zoom in

Description This Bambu Lab AMS lite Filament Hub is essential for reliable filament changes during 3D printing with multiple colours or materials. The hub connects to 4 different PTFE tubes to guide the filament to the extruder. This product is suitable for the Bambu Lab AMS lite and contains the following parts:

1 x AMS lite Filament Hub
1 x Buckle (to attach the hub to the tool head)

Specifications

Brand:

Bambu Lab

Our item no:

DAR02026

€10.95 (coming soon)

€8.90 Excl. 23% VAT

Bambu Lab AMS lite Rotary Spool Holder (yellow)

Zoom in

Description This Bambu Lab AMS lite Rotary Spool Holder (yellow) holds the spool when used in combination with the AMS lite. Each spool has 3 clamps to hold the spool in place. This is the yellow version, where the spool holder can be installed on the roller at the bottom left or top right to feed filament to slot 2 or 4. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Rotary Spool Holder (yellow)

Please note: this spool holder is only suitable for the roller on the bottom left or top right to feed filament to slot 2 or 4. If you need a roller for the bottom right or top left, order the green version.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02027

€15.95 (coming soon)

€12.97 Excl. 23% VAT

Bambu Lab AMS lite 4-pin cable

Zoom in

Description This Bambu Lab AMS lite 4-pin Cable connects the A1 3D printer to the AMS lite. This controls both power and exchanges communication. This product is suitable for the AMS lite from Bambu Lab and contains the following components:

1 x AMS Lite 4-pin Cable

Specifications

Brand:

Bambu Lab

Our item no:

DAR02028

€12.95 (coming soon)

€10.53 Excl. 23% VAT

Bambu Lab AMS lite Filament Funnel Unit (left)

Zoom in

Description This Bambu Lab AMS lite filament Funnel Unit (left) is an internal part of the AMS lite feeder unit. This is the left version that works with slot 1 and 2. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Filament Funnel Unit (left)

Please note: the left and right filament funnel units are not interchangeable. So check carefully which one you need before ordering. This product is the left filament funnel unit and can only be used for slots 1 and 2. If you need filament funnel units for slots 3 and 4, order the right filament funnel unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02029

€21.95 (coming soon)

€17.85 Excl. 23% VAT

Bambu Lab AMS Lite Spool Claw

Zoom in

Description This Bambu Lab AMS Lite Spool Claw is used to hold the spool in place. The rubber pads on the bottom increase friction so the spool doesn't come loose from the spool holder during 3D printing. This product is compatible with the Bambu Lab AMS Lite and contains the following components:

3 x AMS lite Spool Claw

Specifications

Brand:

Bambu Lab

Our item no:

DAR02030

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.95 (coming soon)

€10.53 Excl. 23% VAT

Bambu Lab AMS lite Feeder Unit (left)

Zoom in

Description This Bambu Lab AMS lite Feeder Unit (left) supports the AMS lite when printing with multiple colours and materials. This is the left version that works with slot 1 and 2. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Feeder Unit (left)

Please note: this feeder unit can only be used for slots 1 and 2. If you need a feeder unit for slots 3 and 4, order the right feeder unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02031

€87.50 (coming soon)

€71.14 Excl. 23% VAT

Bambu Lab AMS lite Housing Assembly

Zoom in

Description This Bambu Lab AMS lite Housing Assembly is the housing of the AMS lite. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Housing Assembly

Specifications

Brand:

Bambu Lab

Our item no:

DAR02032

€40.50 (coming soon)

€32.93 Excl. 23% VAT

Bambu Lab AMS lite Mainboard

Zoom in

Description This AMS Lite motherboard is a genuine replacement part from Bambu Lab. This product is suitable for the Bambu Lab AMS Lite and contains the following components:

1 x AMS lite Mainboard

Specifications

Brand:

Bambu Lab

Our item no:

DAR02033

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€59.50 (coming soon)

€48.37 Excl. 23% VAT

Bambu Lab AMS lite Feeder Support

Zoom in

Description This Bambu Lab AMS Lite Feeder Support connects two feeder units. This product is suitable for the Bambu Lab AMS Lite and includes the following components:

1 x AMS lite Feeder Support

Specifications

Brand:

Bambu Lab

Our item no:

DAR02034

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.50

€9.35 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Lite Feeder Cap

Zoom in

Description This AMS Lite Feeder Cap is a genuine replacement part from Bambu Lab. This product is marked with numbers 1 through 4 and is suitable for the Bambu Lab AMS Lite. It contains the following components:

1 x AMS lite Feeder Cap

Specifications

Brand:

Bambu Lab

Our item no:

DAR02035

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€9.95 (coming soon)

€8.09 Excl. 23% VAT

Bambu Lab AMS lite Feeder Motor

Zoom in

Description This AMS Lite Feeder Motor is a genuine replacement part from Bambu Lab. This product is suitable for the Bambu Lab AMS Lite and includes the following components:

1 x AMS lite Feeder Motor

Specifications

Brand:

Bambu Lab

Our item no:

DAR02036

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50 (coming soon)

€10.16 Excl. 23% VAT

Bambu Lab AMS Lite Stand

Zoom in

Description This AMS Lite Stand is a genuine replacement part from Bambu Lab. This product is suitable for the Bambu Lab AMS Lite and includes the following components:

1 x AMS lite Stand

Specifications

Brand:

Bambu Lab

Our item no:

DAR02037

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€23.95 (coming soon)

€19.47 Excl. 23% VAT

Bambu Lab AMS lite Rotary Spool Holder (green)

Zoom in

Description This Bambu Lab AMS lite Rotary Spool Holder (green) holds the spool when used in combination with the AMS lite. Each spool has 3 clamps to hold the spool in place. This is the green version, where the spool holder can be installed on the roller on the bottom right or top left to feed filament to slot 1 or 3. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Rotary Spool Holder (green)

Please note: this spool holder is only suitable for the roller on the bottom right or top left to feed filament to slot 2 or 4. If you need a roller for the bottom left or top right, order the yellow version.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02067

€15.95 (coming soon)

€12.97 Excl. 23% VAT

Bambu Lab AMS lite Filament Funnel Unit (right)

Zoom in

Description This Bambu Lab AMS lite filament Funnel Unit (right) is an internal part of the AMS lite feeder unit. This is the right version that works with slot 3 and 4. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Filament Funnel Unit (right)

Please note: the left and right filament funnel units are not interchangeable. So check carefully which one you need before ordering. This product is the right filament funnel unit and can only be used for slots 3 and 4. If you need filament funnel units for slots 1 and 2, order the left filament funnel unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02068

€22.50 (coming soon)

€18.29 Excl. 23% VAT

Bambu Lab AMS lite Feeder Unit (right)

Zoom in

Description This Bambu Lab AMS lite Feeder Unit (right) supports the AMS lite when printing with multiple colours and materials. This is the right version that works with slot 3 and 4. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Feeder Unit (right)

Please note: this feeder unit can only be used for slots 3 and 4. If you need a feeder unit for slots 1 and 2, order the left feeder unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02069

€89.50 (coming soon)

€72.76 Excl. 23% VAT

Bambu Lab 4 in 1 PTFE Adapter

Zoom in

Description

The Bambu Lab 4-in-1 PTFE Adapter is used to connect PTFE tubes. Unlike the original PTFE tube connector, the 4-in-1 adapter may connect four feeder modules to the printer at the same time. (up to seven distinct filaments: one AMS and three additional filaments)

It can assist customers in connecting the printer to AMS as well as other filaments that are incompatible with AMS, such as TPU 95A, Bambu PET-CF, and other carbon-fiber and glass-fiber filaments.

Compatibility: X1 Series/ P1 Series/ H2D/ H2D Laser 3D Printer

Specifications

Brand:

Bambu Lab

Our item no:

DAR02929