Buy 3D printers, filament, parts & tools | lowest prices

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

€34.75

View 1.75mm PLA glow in the dark Filament

123-3D glow-in-the-dark green PLA filament 2.85mm, 1.1kg

Zoom in

Description Our green glow-in-the-dark 2.85mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01057
Colour:	green	Roundness:	>95%
Filament diameter:	2.85 mm	Spool empty weight:	± 216 grams
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA Glow in the dark	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€24.50 20% discount:

€19.60

€15.93 Excl. 23% VAT

EU warehouse

REAL glow-in-the-dark PLA filament 2.85mm, 0.5kg

Zoom in

Description With this REAL glow-in-the-dark PLA filament (2.85mm) you can create 3D objects that radiate green light in the dark. This makes it possible to create projects with stunning light effects. The filament has the same printing properties as standard PLA. The material is harder and glossier than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Note: Glow in the dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	190 - 215 °C
Colour:	green glow in the dark	Our item no:	DFG02001
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.5 cm
Length:	56 m	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon)

€17.48 Excl. 23% VAT

colorFabb glow in the dark green Glowfill filament 2.85mm, 0.75kg

Zoom in

Description Bring light into the darkness with this green colorFabb glow-in-the-dark filament. Glowfill has a beautiful white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 2.85mm. We recommend a print temperature of 195 to 220°C and a print speed of 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Glowfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	green glow in the dark	Nozzle temp range:	195 - 220 °C
Filament diameter:	2.85 mm	Our item no:	DFP13159
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	32 m	Spool width:	5.5 cm

€42.50

€34.55 Excl. 23% VAT

EU warehouse

REAL glow in the dark PLA filament 2.85mm, 0.5kg

Zoom in

Description With this Real glow in the dark PLA filament (2.85mm) you can create 3D objects that emit green light in the dark. This makes projects with fun light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Please note: Glow in the dark filament has an abrasive effect in the nozzle, causing it to wear out faster. It is therefore recommended to replace the nozzle more often and/or to opt for a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	190 - 215 °C
Brand:	REAL	Our item no:	DFP02240
Colour:	green	Roundness:	>95%
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 55 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Glow in the dark	Spool width:	7.0 cm
Max deviation:	+mn ± 0.10 mm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this tomorrow!

€12.75

€10.37 Excl. 23% VAT

In stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this tomorrow!

€7.75

€6.30 Excl. 23% VAT

In stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this tomorrow!

€7.25

€5.89 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25

€14.84 Excl. 23% VAT

In stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm PLA glow in the dark

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm PLA glow in the dark