Elegoo Neptune 4 Plus Nozzles

Elegoo Neptune 4 Plus & Max Hardened Steel Nozzle Kit

Description The Elegoo Hardened Steel Nozzle Kit for the Neptune 4 Plus and Neptune 4 Max is an essential upgrade for users who regularly print with abrasive filaments such as carbon fibre, metal, or wood-filled materials. These nozzles are designed to withstand high temperatures and wear, making them ideal for long-term, intensive use.

Key Features:

Compatibility: Specially designed for the Elegoo Neptune 4 Plus and Neptune 4 Max.
Durability: Made of hardened steel, making them extremely wear resistant and able to withstand high temperatures without deformation.
Versatility: Suitable for a wide range of filaments including PLA, ABS, PETG, TPU and abrasive materials such as carbon fiber and metal-filled filaments.

Specifications

Brand:

Elegoo

Our item no:

DAR01531

€18.95

€15.41 Excl. 23% VAT

EU warehouse

Elegoo Neptune 4 Plus & Max Brass nozzle, 0.4mm

Zoom in

Description This brass nozzle is an original replacement part from Elegoo. The product is suitable for the Elegoo Neptune 4 Plus and Neptune 4 Max.

Specifications

Brand:	Elegoo	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01536
Material:	Brass

€4.50

€3.66 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ CHT High Flow Nozzle, 0.4mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 0.4mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	Micro Swiss	Nozzle type:
Filament diameter:	1.75 mm	Our item no:	DAR01872
Nozzle coating:	twinclad XT	Variant:	Nozzle
Nozzle diameter:	0.4 mm

Nozzle diameter:

€26.95

€21.91 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ CHT High Flow Nozzle, 0.6mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 0.6mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	Micro Swiss	Nozzle type:
Filament diameter:	1.75 mm	Our item no:	DAR01873
Nozzle coating:	twinclad XT	Variant:	Nozzle
Nozzle diameter:	0.6 mm

Nozzle diameter:

€26.95

€21.91 Excl. 23% VAT

EU warehouse

Micro Swiss FlowTech™ CHT High Flow Nozzle, 0.8mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 0.8mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	Micro Swiss	Nozzle type:
Filament diameter:	1.75 mm	Our item no:	DAR01874
Nozzle coating:	twinclad XT	Variant:	Nozzle
Nozzle diameter:	0.8 mm

Nozzle diameter:

Order now, we can ship this today!

€26.95

€21.91 Excl. 23% VAT

In stock

Micro Swiss FlowTech™ CHT High Flow Nozzle, 1.00mm

Zoom in

Description The Microswiss FlowTech CHT High Flow nozzle was created in collaboration between Microswiss and Bondtech. Thanks to the Bondtech CHT technology, a maximum flow rate of 50mm³/s can be achieved. Because the molten filament passes through multiple chambers during heating, there is better adhesion between layers. There are also fewer gaps and weak points between the layers. This 1.00mm brass FlowTech CHT nozzle is compatible with all FlowTech hotends and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	Micro Swiss	Nozzle type:
Filament diameter:	1.75 mm	Our item no:	DAR01875
Nozzle coating:	twinclad XT	Variant:	Nozzle
Nozzle diameter:	1 mm

Nozzle diameter:

€26.95

€21.91 Excl. 23% VAT

EU warehouse

Bondtech Coated Brass CHT Nozzle for Elegoo Neptune 4 Plus/Max, 0.4mm

Zoom in

Description The Bondtech Coated Brass CHT Nozzle (0.4mm) for the Elegoo Neptune 4 Plus and Max combines high-quality brass construction with advanced Core Heating Technology. This results in faster melting, improved throughput, and stronger prints – ideal for ambitious makers seeking efficiency and quality.

Key product features:

Improved melting capacity and higher volume flow (up to +25–65%)
Brass nozzle with nickel coating for low friction, wear resistance and anti-corrosion
Compatible with Elegoo Neptune 4 Plus and Neptune 4 Max

Caution: To prevent damage, do not change the nozzle while it is cold. Heat the hot end to at least 270°C, preferably 10°C above the printing temperature (max. 300°C) when tightening.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Download TDS:	Download	Our item no:	DAR02396
Filament diameter:	1.75 mm	Quantity:	1
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Bondtech Coated Brass CHT Nozzle for Elegoo Neptune 4 Plus/Max, 0.6mm

Zoom in

Description The Bondtech Coated Brass CHT Nozzle (0.6mm) for the Elegoo Neptune 4 Plus and Max combines high-quality brass construction with advanced Core Heating Technology. This results in faster melting, improved throughput, and stronger prints – ideal for ambitious makers seeking efficiency and quality.

Key product features:

Improved melting capacity and higher volume flow (up to +25–65%)
Brass nozzle with nickel coating for low friction, wear resistance and anti-corrosion
Compatible with Elegoo Neptune 4 Plus and Neptune 4 Max

Caution: To prevent damage, do not change the nozzle while it is cold. Heat the hot end to at least 270°C, preferably 10°C above the printing temperature (max. 300°C) when tightening.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Download TDS:	Download	Our item no:	DAR02397
Filament diameter:	1.75 mm	Quantity:	1
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Bondtech Coated Brass CHT Nozzle for Elegoo Neptune 4 Plus/Max, 0.8mm

Zoom in

Description The Bondtech Coated Brass CHT Nozzle (0.8mm) for the Elegoo Neptune 4 Plus and Max combines high-quality brass construction with advanced Core Heating Technology. This results in faster melting, improved throughput, and stronger prints – ideal for ambitious makers seeking efficiency and quality.

Key product features:

Improved melting capacity and higher volume flow (up to +25–65%)
Brass nozzle with nickel coating for low friction, wear resistance and anti-corrosion
Compatible with Elegoo Neptune 4 Plus and Neptune 4 Max

Caution: To prevent damage, do not change the nozzle while it is cold. Heat the hot end to at least 270°C, preferably 10°C above the printing temperature (max. 300°C) when tightening.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Download TDS:	Download	Our item no:	DAR02398
Filament diameter:	1.75 mm	Quantity:	1
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Bondtech Coated Brass CHT Nozzle for Elegoo Neptune 4 Plus/Max, 1.0mm

Zoom in

Description The Bondtech Coated Brass CHT Nozzle (1.0mm) for the Elegoo Neptune 4 Plus and Max combines high-quality brass construction with advanced Core Heating Technology. This results in faster melting, improved throughput, and stronger prints – ideal for ambitious makers seeking efficiency and quality.

Key product features:

Improved melting capacity and higher volume flow (up to +25–65%)
Brass nozzle with nickel coating for low friction, wear resistance and anti-corrosion
Compatible with Elegoo Neptune 4 Plus and Neptune 4 Max

Caution: To prevent damage, do not change the nozzle while it is cold. Heat the hot end to at least 270°C, preferably 10°C above the printing temperature (max. 300°C) when tightening.

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Download TDS:	Download	Our item no:	DAR02399
Filament diameter:	1.75 mm	Quantity:	1
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated