Creality 3D ender-3 pro spare parts

Creality 3D Ender-3 motherboard fan axial with connector 24V, 40mm x 40mm x 10mm

Description This Creality 3D Ender-3 motherboard fan axial with connector is to replace your old or damaged fan. It is compatible with Creality 3D Ender-3 printers. It has a voltage of 24V and measures 40mm x 40mm x 10 mm.

Specifications

Brand:	Creality 3D	Dimensions:	10 x 40 x 40 mm
Cable length:	15 cm	Our item no:	DAR00040
Fan type:	axial	Voltage:	24 v

€17.25

€14.02 Excl. 23% VAT

EU warehouse

Creality 3D end stop

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10mini and CR-10s series

Specifications

Brand:

Creality 3D

Our item no:

DEL00008

Order now, we can ship this tomorrow!

€5.25

€4.27 Excl. 23% VAT

In stock

Creality 3D V-slot wheel (2-pack)

Zoom in

Description These V-Slot wheels are made of POM. The bearings are pre-pressed and can be mounted directly on the Creality 3D printers.

Specifications

Bearing type:	625ZZ	Outer diameter:	24 mm
Brand:	Creality 3D	Our item no:	DME00113
Inner diameter:	5 mm	Thickness:	10 mm

Order now, we can ship this tomorrow!

€6.50

€5.28 Excl. 23% VAT

In stock

Creality 3D extrusion base

Zoom in

Description Creality 3D extrusion base spare part

Specifications

Brand:

Creality 3D

Our item no:

DME00130

€3.50

€2.85 Excl. 23% VAT

EU warehouse

Creality 3D printbed leveling wheel set (4-pack)

Zoom in

Description With this large set of Creality 3D adjusting wheels you can effortlessly adjust the level of your print bed. This set contains 4 adjusting wheels that have been specially developed by Creality 3D for the CR-10, CR-10S, CR-10 Mini and the Ender-3 3D printers.

Specifications

Brand:	Creality 3D	Our item no:	DME00131
Height:	10 mm	Screwthread type:	M4
Outer diameter:	60 mm

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Creality 3D Flexible Magnetic Bonding Platform, 235mm x 235mm

Zoom in

Description Upgrade your Ender-3 or CR-20 3D printer with this flexible and magnetic build plate from Creality 3D. The surface of this build plate has been specially developed for PLA filament and filament based on PLA. This set consists of 2 magnetic parts. You stick the first part on the print bed of your 3D printer. Due to the magnetic effect, the second part remains firmly on the print bed.

Note: When attaching the magnetic surface to the print bed; mind the orientation. If the orientation is not correct, it is possible that the print layer of this set does not adhere properly to the lower part.

Specifications

Brand:	Creality 3D	Max temp:	65 °C
Dimensions:	235 x 235 mm	Our item no:	DME00134

Order now, we can ship this tomorrow!

€17.25

€14.02 Excl. 23% VAT

In stock

Creality 3D Ender-3 belt Y-axis, 740mm

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the Y axis of the Creality 3D Ender-3 printer.

Specifications

Belt size:	6 mm	Our item no:	DME00144
Brand:	Creality 3D	Tooth pitch:	2 mm
Length:	74 cm

€6.75

€5.49 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 belt X-axis, 770mm

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the X axis of the Creality 3D Ender-3 printer.

Specifications

Belt size:	6 mm	Our item no:	DME00155
Brand:	Creality 3D	Tooth pitch:	2 mm
Length:	77 cm

€6.75

€5.49 Excl. 23% VAT

EU warehouse

Micro Swiss high temperature MK8 heater block upgrade

Zoom in

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications

Brand:	Micro Swiss	Our item no:	DMS00122
Dimensions:	10 x 21 x 20 mm	Screwthread type:	M6
Material:	Copper

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 (Pro) mainboard v4.2.2

Zoom in

Description Can also be used for the following printers:
- Creality 3D Ender-5

Specifications

Brand:	Creality 3D	Our item no:	DRW00033
On-board stepper drivers:	4

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€55.50

(coming soon)

€45.12 Excl. 23% VAT

Creality 3D Part radial cooling fan, 24V, 40mm x 40mm x 10mm

Zoom in

Description This small 24V radial fan is ideal for cooling your print. The fan ensures a constant airflow and can, for example, be mounted compactly next to the extruder. This original Creality fan is suitable for the Ender 3 and Ender 3 Pro.

The fan has a cable length of more than 1m.

Specifications

Brand:	Creality 3D	Dimensions:	10 x 40 x 40 mm
Cable length:	10 cm	Our item no:	DRW00039
Fan type:	radial	Voltage:	24 v

Order now, we can ship this tomorrow!

€7.00

€5.69 Excl. 23% VAT

In stock

Creality 3D fan axial 24V, 40mm x 40mm x 10mm

Zoom in

Description This Creality 3D fan axial is a replacement fan for the original fan. It is compatible with Creality 3D printers. It has a voltage of 24V and the measurements 40mm x 40mm x 10mm.

Specifications