Buy 3D printers, filament, parts & tools | lowest prices

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Brand:	ANTCLABS	Voltage VDC:	5 v/°c
Cable length:	15 cm	Weight:	0.01 kg
Our item no:	DAR00016

Order now, we can ship this on Monday!

€39.50

€32.11 Excl. 23% VAT

In stock

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

Order now, we can ship this on Monday!

€17.00

€13.82 Excl. 23% VAT

In stock

M12 LJ12A3-4-Z/BX Inductive distance sensor, 4mm

Zoom in

Description Easily add an automatic bed level system to your 3D printer with this inductive distance sensor. The sensor triggers on metal objects and has a theoretical measuring distance of 4mm. The diameter of the sensor is 12mm.

The sensor operates on 6V-36V DC and is an NPN variant/NO. The sensor has an internal pull-up resistor which makes it necessary to add a series resistor to the signal connection.

Wire colours:
Brown: +V (12V)
Black: Output (to series resistor 10k)
Blue: 0V (gnd)

Specifications

Brand:	123-3D	Max current:	0.3 A
Diameter:	12 mm	Our item no:	DEL00006
Input voltage:	6-36V	Screwthread type:	M12

Order now, we can ship this on Monday!

€9.25

€7.52 Excl. 23% VAT

In stock

External MOSFET module, 25A (123-3D version)

Zoom in

Description This powerful MOSFET module (type NCEP01T18T) withstands higher currents than the MOSFET on your RAMPS or similar electronics boards. The module is suitable for 12V and 24V heated beds or hot ends and can handle PWM controls. The kit includes a ready-to-install PCB with a short connection cable.

NOTE: For high currents it is important to actively cool the module. The maximum current without active cooling is ±18A.

Specifications

Brand:	123-3D	Our item no:	DHB00017
Height:	33 mm	Voltage rating:	24 v
Length :	60 mm	Width:	50 mm
Max current:	25 A

Order now, we can ship this on Monday!

€16.75

€13.62 Excl. 23% VAT

In stock

Igus Drylin RJ4JP-01-08 LM8UU linear bearing (123-3D version)

Zoom in

Description This set contains two Igus Drylin plain bearings. The bearings are compatible with the LM8UU bearings and are lubricant-free. These linear bearings make your 3D printer quieter.
This pack contains 2 bearings.

Specifications

Bearing type:	LM8UU	Length :	24 mm
Brand:	123-3D	Outer diameter:	15 mm
Inner diameter:	8 mm	Our item no:	DME00046

Order now, we can ship this on Monday!

€6.50

€5.28 Excl. 23% VAT

In stock

Heated bed spring, 25mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Brand:	123-3D	Length:	25 mm
Colour:	orange	Outer diameter:	8 mm
Inner diameter:	5 mm	Our item no:	DME00139

Order now, we can ship this on Monday!

€5.75

€4.67 Excl. 23% VAT

In stock

Heated bed spring, 30mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Brand:	123-3D	Length:	30 mm
Colour:	orange	Outer diameter:	8 mm
Inner diameter:	5 mm	Our item no:	DME00298

Order now, we can ship this on Monday!

€5.75

€4.67 Excl. 23% VAT

In stock

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

Zoom in

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favorable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A6	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Prusa i3 MK2	anycubic
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75 mm Hotend
	Prusa i3 MK3

Specifications

Brand:	Micro Swiss	Our item no:	DMS00102
Material:	Silicone	Quantity:	3

Order now, we can ship this on Monday!

€12.50

€10.16 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

Customer reviews

Payment options

Follow us on social media

Official dealer

Anet 3D A6 upgrades

Popular products