Bondtech

Description The mirrored Bondtech BMG has a dual drive for trouble-free material feeding. This extruder gives you the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. It also has a built-in fitting for the E3D hotend and fits on NEMA17 stepper motors. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech BMG is a compact powerhouse with hardened steel drive wheels, using an internal gear ratio of 3:1. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a overwhelming result.

In addition, it is possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance. Furthermore, thanks to the 'quick-release' lever, changing material is very easy.

E-step setting: 415 (1.75mm) steps/mm

Data sheet (PDF)
Installation video (YouTube)

Specifications

Brand:	Bondtech	Our item no:	DBO00005
Filament diameter:	1.75 mm

€87.50

€71.14 Excl. 23% VAT

EU warehouse

Bondtech BMG® Internals Set for HextrudORT

Zoom in

Description This genuine Bondtech parts kit is precision CNC machined and suitable for powerful filament feeding. You use the parts in combination with the HextrudORT. The super sharp teeth give you maximum grip on the filament. Thanks to its extremely high wear resistance, this set is ideal for processing abrasive filaments.

The packaging contains:

1.75 / 5.0mm Hardened Steel Bondtech drive sprocket set, with primary wheel (5mm inner diameter) and secondary wheel with two needle bearings, M3 x 2 setscrew and 3 x 20mm axle
main shaft assembly
thumbscrew mounting
4mm plug-in collar
2 ball bearings of 5mm x 8mm x 2.5mm

Specifications

Brand:

Bondtech

Our item no:

DBO00084

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Bondtech BMG-M mirrored extruder, 1.75mm

Zoom in

Description This mirrored Bondtech BMG-M is a compact powerhouse with hardened steel drive wheels and an internal gear ratio of 3:1. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

It is possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance.

The Bondtech BMG-M standard is optimised for the following hotends:

The integrated torque lock system is strong and changing nozzles is child's play. Mounting the hotend is also easy thanks to the two bolts.

E-step setting: 415 (1.75mm) steps/mm

Data sheet (PDF)
Installation video (YouTube)

Specifications

Brand:	Bondtech	Our item no:	DBO00009
Filament diameter:	1.75 mm

€87.50

€71.14 Excl. 23% VAT

EU warehouse

Bondtech BMG-M extruder, 1.75mm

Zoom in

Description The Bondtech BMG-M is a compact powerhouse with hardened steel drive wheels and internal gear ratio of 3:1. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The BMG extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

It is possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy. This extruder is designed for 1.75mm filament, but has been tested to tolerances between 1.5mm and 2.0mm to ensure high performance.

The Bondtech BMG-M standard is optimised for the following hotends:

Specifications

Brand:	Bondtech	Our item no:	DBO00008
Filament diameter:	1.75 mm

€87.50

€71.14 Excl. 23% VAT

EU warehouse

Bondtech BMG-X2 extruder, 18mm

Zoom in

Description The Bondtech BMG-X2 (18mm) combines high performance and high resolutions with a lightweight solution and compact design. The dual-drive ensures trouble-free material feeding. The BMG-X2 has been specially developed for the E3D Chimera and Cyclops hotends with a CC of 18.00mm. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Specifications

Brand:	Bondtech	Our item no:	DBO00006
Filament diameter:	1.75 mm

€149.00

€121.14 Excl. 23% VAT

EU warehouse

Bondtech BMG-X2 extruder, 20mm

Zoom in

Description The Bondtech BMG-X2 (20mm) combines high performance and high resolutions with a lightweight solution and compact design. The dual drive ensures trouble-free material feeding. The BMG-X2 has been specially developed for the E3D Chimera and Cyclops hotends with a CC of 20mm. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Specifications

Brand:	Bondtech	Our item no:	DBO00007
Filament diameter:	1.75 mm

€149.00

€121.14 Excl. 23% VAT

EU warehouse

Bondtech DDX Copperhead adapter set

Zoom in

Description

Install your Copperhead hotend in a DDX upgrade kit with this Bondtech DDX adapter set.

The package contains:

1x 10079-51 SLS Copperhead adapter for DDX
1x DDX thermistor adapter

Specifications

Brand:

Bondtech

Our item no:

DBO00024

€14.00

€11.38 Excl. 23% VAT

EU warehouse

Bondtech DDX Mosquito adapter set

Zoom in

Description

Install your Mosquito hotend in a DDX upgrade kit with this Bondtech DDX adapter set.

The package contains:

x 1 10079-51 SLS Mosquito adapter for DDX
x 1 DDX thermistor adapter

Specifications

Brand:

Bondtech

Our item no:

DBO00023

€13.50

€10.98 Excl. 23% VAT

EU warehouse

Bondtech DDX V2 Micro Swiss All-Metal adapter

Zoom in

Description

Install your Micro Swiss All-Metal hot end in a DDX V2 upgrade kit with this Bondtech DDX adapter set.

The package contains:

1x 10079-53 SLS Micro Swiss adapter for DDX V2

Specifications

Brand:	Bondtech	Our item no:	DBO00060
Material:	Nylon	Video instructions:	Instructional video

€10.00

€8.13 Excl. 23% VAT

EU warehouse

Bondtech LGX Lite ALU Mount Plate for Mosquito

Zoom in

Description Use this holder to attach your Mosquito or Mosquito Magnum hotend directly to the LGX Lite.
Made of aluminum and blasted.

Specifications

Brand:	Bondtech	Our item no:	DBO00099
Material:	Aluminum

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€14.75

(coming soon)

€11.99 Excl. 23% VAT

Bondtech LGX Lite PA12 Mount for MGN12 Carriages

Zoom in

Description Use this holder to install the LGX Lite on an MGN12C or MGN12H cradle. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Brand:	Bondtech	Our item no:	DBO00107
Material:	Polyamide

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95

(coming soon)

€11.34 Excl. 23% VAT

Bondtech LGX Lite PA12 Mount for MGN7 Carriages

Zoom in

Description Use this holder to install the LGX Lite on an MGN7C or MGN7H cradle. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Brand:	Bondtech	Our item no:	DBO00106
Material:	Polyamide

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95

(coming soon)

€11.34 Excl. 23% VAT

Bondtech LGX Lite PA12 Mount for MGN9 Carriages

Zoom in

Description Use this holder to install the LGX Lite on an MGN9C or MGN9H cradle. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Brand:	Bondtech	Our item no:	DBO00105
Material:	Polyamide

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95

(coming soon)

€11.34 Excl. 23% VAT

Bondtech LGX® Lite Extruder (no motor)

Zoom in

Description The Bondtech LGX Lite is a filament feeder that uses Bondtech's new dual drive technology with larger drive gears. The extruder is only suitable for 1.75mm filament.

Most important features:

• Compact and lightweight filament pad
• Maintenance window for easy cleaning
• Large drive wheels for better filament grip
• Preload lever with 3 presets

Specifications

Brand:	Bondtech	Mounting hole:	M3
Filament diameter:	1.75 mm	Our item no:	DBO00097

€104.50

€84.96 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 Creality CR-10(S) Pro & Max adapter set

Zoom in

Description

Use this Bondtech DDX adapter set to install your DDX upgrade kit. It is compatible with the following Creality 3D printers:

The package contains:

1x 10079-4 PA12 fan cover
1x 10079-44 PA12 Bowden adapter
1x M3x10mm button head screw
1x M3x5mm square nut

Note: This kit is required to install both a DDX and a DDX V3 upgrade kit
Note: Your printer requires a 40mm x 40mm x 20mm radial fan.
Note: The CR-10S PRO V2 and CR-10 MAX require an alternative bracket to mount the BL touch.

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00052

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Bondtech HeatLink ferrule

Zoom in

Description The Bondtech Ferrule Heatlink is an adapter between the thermistor or heater heatlink and the printer. This specific heatlink has a 50mm bridging cable and a molex-fit 3.0 male connector. On the other side is a ferrule connector.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00070

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Bondtech LGX Lite PA12 Mount Set for Copperhead (groove mount)

Zoom in

Description Use this holder to attach your Copperhead Groove Mount hotend directly to the LGX Lite. The holder is laser-sintered in Polyamide 12 and blasted. The protective wax layer reduces sensitivity to moisture and grease.

Specifications

Brand:	Bondtech	Our item no:	DBO00104
Material:	Polyamide

€15.75

€12.80 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 Creality Ender & CR-10 adapter set

Zoom in

Description

Use this Bondtech DDX adapter set to install your DDX upgrade kit.
The package contains:

1x 10079-32 SLS fan cover
1x CE SLS hot-end adapter

It is compatible with the following Creality 3D printers:

Ender-3 / Ender-3 Pro
Ender-5 / Ender-5 Pro
CR-10 / CR-10S / CR-10S4 / CR-10S5

Note: Your printer requires a 40mm x 40mm x 10mm radial fan.

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00051

€53.50

€43.50 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 Creality direct drive extruder

Zoom in

Description This extruder has a double drive and therefore delivers high-quality prints. The extruder is suitable for Creality 3D printers and is compatible with hotends of almost any Creality model, but can also be upgraded to a Copperhead or Mosquito hotend. With this extruder you have more options for materials, higher flow and wider nozzles and thinner layers to achieve a higher print quality.

Specifications

Brand:

Bondtech

Our item no:

DBO00054

€109.50

€89.02 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 PA12 fan shroud for CR-10(S) Pro & Max

Zoom in

Description The Bondtech DDX V3 PA12 fan shroud provides improved air distribution at the nozzle.

Compatible with the following printers:
	●	Creality 3D CR-10S Pro	●	Creality 3D CR-10S Pro V2
	●	Creality 3D CR-10 Max

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00046

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 PA12 fan shroud for Ender & CR-10(S)

Zoom in

Description The Bondtech DDX V3 PA12 fan shroud provides improved air distribution at the nozzle.

Compatible with the following printers:
	●	Ender-3	●	Ender-6
	●	Ender-3 v2	●	CR-10
	●	Ender-3 Pro	●	CR-10 Mini
	●	Ender-5	●	CR-10S
	●	Ender-5 Pro	●	CR-10 S4
	●	Ender-5 Plus	●	CR-10 S5

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00045

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Zoom in

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hot ends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hot end cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Brand:	Bondtech	Our item no:	DBO00050
Filament diameter:	1.75 mm

€147.50

€119.92 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut X-carriage

Zoom in

Description You need this Bondtech LGX Shortcut X carriage to install the "Bondtech LGX Shortcut Copperhead for Prusa MK3S" and "Bondtech LGX Shortcut Mosquito for Prusa MK3S" upgrade kits. The X-carriage reduces the distance between the nozzle and the x-axis.

This part is professionally 3D printed with nylon for maximum strength, precision and higher temperature resistance. The operating temperature limit for the stepper motor is max. 70°C and the maximum operating temperature is 90°C. The X-carriage itself can withstand temperatures up to 100°C. For durability, this part is supplied unpainted. It has the natural colour of the material and a wax coating.

The LGX Shortcut X-carriage for MK3S(+) comes with:

SLS X-carriage front
SLS X-carriage rear
5 x M3 x 10 screws
5 x M3 square nut
1 x M3 nut
2 x 100mm black cable ties

Specifications

Brand:	Bondtech	Our item no:	DBO00090
Material:	Nylon

€39.50

€32.11 Excl. 23% VAT

EU warehouse

Bondtech drivegear kit, 1.75mm (5mm shaft)

Zoom in

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 1.75mm filament and has a 5mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Brand:	Bondtech	Material:	Steel
Filament diameter:	1.75 mm	Our item no:	DBO00057

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut Mosquito Hotend

Zoom in

Description

With the Bondtech LGX Shortcut Mosquito hotend you can print all kinds of filaments at temperatures up to 450°C. This product is suitable for use with the LGX Extruder. With the LGX Shortcut Mosquito hotend you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 23mm shorter than the standard Mosquito hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

a Mosquito Hotend (without Heatsink)
a black anodized LGX™ aluminum cooling basin
an air-cooled black anodized LGX™ aluminum heat sink
an air-cooled LGX™ Cold Block mounting hardware
a Bondtech M6x1x7.5 coated brass mouthpiece 0.4 mm (V6)
a bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard. You can change the nozzle with one hand.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Specifications

Brand:	Bondtech	Our item no:	DBO00088
Filament diameter:	1.75 mm	Weight:	0.061 kg

€149.50

€121.54 Excl. 23% VAT

EU warehouse

Bondtech LGX® Lite Front Plate Cubes

Zoom in

Description Spare part for the Bondtech LGX® Lite. Cube pattern front plate made of grey polyamide without colouring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Brand:	Bondtech	Our item no:	DBO00101
Dimensions:	20 x 50 x 100 mm	Weight:	0.02 kg

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Creality3D CR-10(S)/Ender-3

Zoom in

Description This Bondtech extruder upgrade kit for the Creality CR-10(S) and Ender-3 replaces the original extruder. This set can also be used on the CR-10S printer from Creality, only the mounting bracket has no attachment for the filament detection sensor of the CR-10S printer.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Reverse the direction of rotation, refer to the installation manual.

Instruction manual
Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00014
Filament diameter:	1.75 mm

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Creality3D CR-10S

Zoom in

Description The Bondtech extruder upgrade kit for the Creality CR-10S (and other printers that use the same type of mounting plate) replaces the original extruder.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting : 415 (1.75mm) steps/mm

Reverse the direction of rotation, refer to the installation manual.

Instruction manual
Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00010
Filament diameter:	1.75 mm

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Prusa I3 MK2 - MK2S

Zoom in

Description This Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2 and the MK2S and already has gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements. In addition, the weight is reduced, which reduces vibrations and ghosting.

This set comes with a 25mm pancake stepper, with a torque of 18 Ncm for a lightweight yet powerful extrusion and a new cable for connecting the motor. Use the part cooling fan (50mm x 15mm) of the current printer, it is not included with this item.

The E steps should be updated to 415 for MK2, MK2s and MK2.5. Follow Prusa/Bondtech guide for E steps calibration for MK2s and MK2.5.

The weight is reduced by 121 grams.

Installation files
Firmware (MK3S 3.7.0.)

Specifications

Brand:

Bondtech

Our item no:

DBO00012

€123.50

€100.41 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Prusa I3 MK2.5 - MK3

Zoom in

Description The Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2.5 and the MK3 and already have gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements. In addition, the weight is reduced, which reduces vibrations and ghosting.

This set comes with a 25mm pancake stepper, with a torque of 18 Ncm for a lightweight yet powerful extrusion and a new cable for connecting the motor. Use the part cooling fan (50mm x 15mm) and original (40mm x 40mm x 10mm) of the current printer, these are not included in this article, as well as the filament sensor.

The E steps should be updated to 415 for MK2, MK2s and MK2.5. Follow Prusa/Bondtech guide for E steps calibration for MK2.5 and MK3.

The weight is reduced by 121 grams.

Installation files
Firmware (MK3S 3.7.0.)

Specifications

Brand:

Bondtech

Our item no:

DBO00011

€117.50

€95.53 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Prusa I3 MK2.5S - MK3S

Zoom in

Description The Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2.5S and the MK3S and already has gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements.

The E steps should be updated to 415 for the MK2.5S. For MK3 it should be 830 because it uses 32 bit microstepping. Also, the Z_MAX_POS 205 must be adjusted. The correct firmware can be found at the bottom of this page.

NOTE: This upgrade kit requires additional parts (X-Carriage Kit). You can download the STLs and 3D print them.

Installation files
MK2.5S - STL Front
MK3S - STL Front
MK2.5s / MK3S - STL Rear
Firmware (MK3S 3.7.2.)

Specifications

Brand:	Bondtech	Weight:	0.292 kg
Our item no:	DBO00015

€119.75

€97.36 Excl. 23% VAT

EU warehouse

Bondtech heat-break kit for Prusa Mini

Zoom in

Description Give your Prusa Mini an upgrade and prevent heat-creep issues with this Bondtech heat-break kit.

This part is made of stainless steel and specially developed to prevent heat-creep issues with the Prusa Mini. In addition, the length of the PTFE tube has been adjusted in such a way that no accumulation of filament can occur between the tube and the heat-break.

This upgrade kit contains the following items:

1x 32 x 5.48mm stainless steel heat break
1x 34.5mm 2/4 Beveled PTFE tubing

When mounting these parts in the heat sink, we recommend the use of thermal paste for better thermal transfer.

View the extensive manual with simple step-by-step explanations here.

Specifications

Brand:

Bondtech

Our item no:

DBO00019

Order now, we can ship this on Monday!

€17.00

€13.82 Excl. 23% VAT

In stock

Bondtech heatsink

Zoom in

Description This heatsink can be used to cool various parts. This part is easy to attach thanks to the self-adhesive back.

Due to the size of 40 x 40 x 11mm, this heatsink fits well on nema17 stepper motors.

Specifications

Brand:	Bondtech	Material:	Aluminum
Colour:	black	Our item no:	DBO00048
Dimensions:	11 x 40 x 40 mm	Weight:	18 grams

Order now, we can ship this on Monday!

€3.25

€2.64 Excl. 23% VAT

In stock

Bondtech HeatLink Thermistor 300C

Zoom in

Description With this Heatlink Thermistor you are able to read temperatures up to 300 degrees Celsius.

The Thermistor can be used in combination with the following two heat links:

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00062
Cable length:	150 cm	Video instructions:	Instructional video
Max temp:	300 °C

€15.00

€12.20 Excl. 23% VAT

EU warehouse

Bondtech HeatLink JST XH-2 with lock

Zoom in

Description The Bondtech Heatlink JST XH-2 is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a type JST XH-2 as a special connection. This connection is provided with a lock clamp.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00065

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Bondtech HeatLink JST XHP-2

Zoom in

Description The Bondtech Heatlink JST XHP-2 is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a JST XHP-2 type as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00066

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Bondtech HeatLink JST VHR-2N

Zoom in

Description The Bondtech Heatlink JST VHR-2N is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a JST VHR-2N type as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00067

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Bondtech HeatLink JST SMP-02V-BC

Zoom in

Description The Bondtech Heatlink JST SMP-02V-BC is an adapter between the thermistor or heater heatlink and the printer. The Heatlink is equipped with a standard Molex micro-fit 3.0 male connector and has a JST-SMP-02V-BC type as a special connection.

You can find the corresponding Thermistor and Heater heatlink cables here:

Specifications

Brand:	Bondtech	Video instructions:	Instructional video
Our item no:	DBO00068

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Bondtech IFS extruder for Prusa mini

Zoom in

Description Upgrade your Prusa Mini/+ with this new filament sensor. The IFS extruder is designed to fit perfectly into the original Prusa Mini housing. This Bondtech IFS extruder is the successor to the Bondtech Dual Drive Extrusion Upgrade Kit (EXT-KIT-76).

The print head can be used with or without the filament sensor. The hardened steel Dual Drive gears give you more choice of materials to work with. This also allows you to work with abrasive materials, where this would otherwise wear out the gears of the original feeder. Another advantage of this IFS extruder is the adjustable tension. The thumb screw tensioner allows you to fine-tune the pressure the drive gears exert on the filament to suit your preferences or the type of material. Material changes can be carried out quickly and easily by activating the handy Quick-Release lever.

This upgrade kit includes:

x 1 Bondtech IFS extruder for the Prusa Mini
x 1 IFS magnet holder (PA12)
x 1 IFS lever (PA12)
x 1 extruder plug (HT-PLA)
x 3 Black Nylon Cable Ties
x 4 M3 x 35 + 1 x M3 x 12 black oxide steel screws
x 1 Brass Motor Gear
x 1 Thumbscrew Mount

Specifications

Brand:	Bondtech	Our item no:	DBO00058
Filament diameter:	1.75 mm	Weight:	0.114 kg
Material:	Nylon

€76.50

€62.20 Excl. 23% VAT

EU warehouse

Bondtech Prusa mini extruder upgrade to IFS

Zoom in

Description With these Bondtech parts you give the extruder of your Prusa Mini an FSI upgrade. Use the Bondtech Prusa Mini Extruder Upgrade Kit to make the original Prusa Mini extruder compatible with IFS. The kit allows the new filament sensor for Prusa Mini to be mounted in the Prusa Mini extruder.

The front housing of the IFS extruder for Prusa Mini contains a plug to hold the steel ball of the filament sensor. Allows the extruder to be used without a filament sensor. Do you want to use the IFS extruder with the Prusa filament sensor? Then remove the connector and follow the instructions to install the necessary accessories.

This upgrade kit includes:

x 1 10076-3 front housing (PA12)
x 1 10076-4 IFS magnet holder (PA12)
x 1 10076-5 IFS handle (PA12)
x 1 15112 IFS extruder plug (HT-PLA)

Specifications

Brand:	Bondtech	Our item no:	DBO00059
Material:	Nylon	Weight:	0.103 kg

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Bondtech Prusa i3 MK3S+ / MK3S / MK2.5S Mosquito

Zoom in

Description A lightweight, high-resolution extruder upgrade for the Prusa i3 MK3S and MK2.55 3D printers.
The design is optimized to use Mosquito (Magnum) hotends.

Most important features:

• Adapted to Prusa's new filament sensor and Mosquito hotends;
• Includes Bondtech BMG extruder with 3:1 gearing ratio;
• Optimized geometry for cooling the heat sink;
• Attachment for PINDA sensor included;
• Less moving weight to reduce vibration and ghosting;
• Professional SLS 3D printed housing and 3 other key parts.

Specifications

Brand:	Bondtech	Weight:	0.378 kg
Our item no:	DBO00061

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€127.50

(coming soon)

€103.66 Excl. 23% VAT

Bondtech QR mirrored extruder including motor and cable PC2510, 1.75mm

Zoom in

Description The mirrored Bondtech QR has a dual drive for hassle-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 476.5 (1.75mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00001
Filament diameter:	1.75 mm

€169.00

€137.40 Excl. 23% VAT

EU warehouse

Bondtech QR extruder including motor and cable, 1.75mm

Zoom in

Description This Bondtech QR has a dual drive for trouble-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or create fast prints with large nozzles, you can always expect a crushing result. It is also possible to work with special filaments, such as nylon, carbon and flexible filament, thanks to the high reliability of the extruder. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 476.5 (1.75mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00000
Filament diameter:	1.75 mm

€169.00

€137.40 Excl. 23% VAT

EU warehouse

Bondtech QR mirrored extruder including motor and cable PC2510, 2.85/3.0mm

Zoom in

Description The mirrored Bondtech QR has a dual drive for hassle-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect a crushing result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. And thanks to the 'Quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 492.45 (2.85mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00003
Filament diameter:	2.85 mm

€169.00

€137.40 Excl. 23% VAT

EU warehouse

Bondtech QR extruder including motor and cable PC2510, 2.85/3.0mm

Zoom in

Description The Bondtech QR has a dual drive for trouble-free material feeding. This extruder gives the highest performance, reliability and precision. The filament will no longer slip or show signs of wear. The QR extruder is a universal solution suitable for both Bowden and direct drive applications. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

The Bondtech QR uses a NEMA17 stepper motor. This compact powerhouse, with hardened steel drive wheels, has an integrated plane reduction motor with a 5:1 ratio. Print in high resolution with small nozzles or fast prints with large nozzles, you can always expect an overwhelming result. It is also possible to work with special filaments, thanks to the high reliability of the extruder. For example, experiment with nylon, carbon and flexible filament. Furthermore, thanks to the 'quick-release' lever, changing material is very easy.

Each extruder is shipped assembled and pre-tested for optimum performance.

Recommended motor current setting: 1.2A
E-step setting: 492.45 (2.85mm) steps/mm

The extruder comes with the following parts:

Bondtect QR
700mm stepper motor cable (standard 2510 connector)

Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00002
Filament diameter:	2.85 mm

€169.00

€137.40 Excl. 23% VAT

EU warehouse

Bondtech QR-M extruder, 1.75mm

Zoom in

Description

This Bondtech QR-M extruder is a compact powerhouse with hardened steel drive wheels and a 5:1 gear ratio. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the double drive, material is fed in without any problems and you are assured of good performance, reliability and high precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

In addition, this reliable QR-M extruder is very suitable for use with special filaments, such as nylon, carbon or flexible filament. Activate the handy 'quick-release' lever and easily change materials. The extruder is designed for 1.75mm filament.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 476.5 (1.75mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00041
Filament diameter:	1.75 mm	Variant:	Right

Filament diameter:

1.75 mm

2.85 mm

€163.50

€132.93 Excl. 23% VAT

EU warehouse

Bondtech QR-M extruder, 2.85mm

Zoom in

Description

This Bondtech QR-M is a compact powerhouse with hardened steel drive wheels and a gear ratio of 5:1. Print in high resolution with small nozzles or create fast prints with large nozzles. You can always expect an excellent result.

Thanks to the dual drive, material is fed smoothly and you are assured of high performance, reliability and precision. The filament will not slip or wear out, allowing you to create perfect 3D prints.

The Bondtech QR-M is compatible with:

Mosquito
Mosquito Magnum
Mosquito Liquid
Mosquito Magnum+

E-step setting: 492.45 (2.85mm) steps/mm

Please note the extruder is supplied without the mount.

Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00043
Filament diameter:	2.85 mm	Variant:	Right

Filament diameter:

1.75 mm

2.85 mm

€163.50

€132.93 Excl. 23% VAT

EU warehouse

Bondtech HeatLink heater catridge 24V, 50W

Zoom in

Description The Bondtech 24V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 24v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00063
Power rating:	50 W	Voltage:	24 v

€14.00

€11.38 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.60mm

Zoom in

Description

This brass Bondtech CHT M6 nozzle has a nickel coating and is highly resistant to corrosion. The nozzle also produces less friction so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts and flows faster.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DBO00071
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this on Monday!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DBO00072
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.00

(coming soon)

€17.07 Excl. 23% VAT

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.00mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.0mm and is suitable for filament with a diameter of 175 mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DBO00073
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1.4 mm
Filament diameter:	1.75 mm	Our item no:	DBO00074
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 1.80mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.8mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1.8 mm
Filament diameter:	1.75 mm	Our item no:	DBO00075
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75mm x 0.40mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm and also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hot ends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DBO00076
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle M6, 1.75 x 0.50mm

Zoom in

Description

This brass Bondtech CHT nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.5mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito®/Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DBO00095
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00078
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.4 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00079
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.6 mm

Nozzle diameter:

Order now, we can ship this on Monday!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00080
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.8 mm

Nozzle diameter:

Order now, we can ship this on Monday!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00081
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00082
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1.4 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1. mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00083
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1.8 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.40mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.40mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00851
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.60mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.60mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00852
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 0.80mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.80mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00853
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.00

(coming soon)

€21.14 Excl. 23% VAT

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.00mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a brass coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00854
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® Volcano brass coated nozzle | M6, 1.75mm x 1.20mm

Zoom in

Description

The Bondtech CHT Volcano nozzle M6 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 1.20mm and is suitable for filament with a diameter of 1.75mm but also compatible with 2.85mm filament.

Unique to these Bondtech CHT nozzles is that they split the filament into 3 thin strands, so that the filament melts faster and higher flow rates can be achieved.

The nozzle is compatible with the following hotends/blocks:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D V4, V5 and V6 blocks
E3D Chimera and Kraken
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR00855
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00946
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this on Monday!

€55.00

€44.72 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00947
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00

€44.72 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00948
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this on Monday!

€55.00

€44.72 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00949
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€55.00

€44.72 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00951
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

Order now, we can ship this on Monday!

€48.00

€39.02 Excl. 23% VAT

In stock

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 0.80mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00952
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal RepRap coated nozzle, 1.75mm x 1.00mm

Zoom in

Description The Bondtech CHT® BiMetal RepRap coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DAR00953
Material:	Brass	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 0.40mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00954
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

0.4 mm

0.6 mm

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech CHT® BiMetal MK8 coated nozzle 1.75mm x 0.60mm

Zoom in

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00955
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

0.4 mm

0.6 mm

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech Raise3D Pro2 Upgrade Bundle

Zoom in

Description Would you like to get the most out of your 3D printer? The Bondtech Raise3D Pro2 Upgrade Bundle makes it possible. You can prevent common problems such as under extrusion and clogging with this Slice Engineering upgrade. The result: higher resolution and less downtime and failed prints. You also waste less filament. It makes printing easier and more fun.

The set consists of the following products:

2 x Copperhead™ Hotend – Standard – G2
2 x Vanadium™ Nozzle – 0.4mm
1 x Boron Nitride Paste 2x Custom Industrial Heater – 50W 24V / 300mm / bare leads
2 x Custom Thermocouple – Type K / 285mm / Bare Leads

The bundle is suitable for the following printers:

Raise3D Pro2
Raise3D Pro2 Plus

Specifications

Brand:	Bondtech	Our item no:	DAR00979
Filament diameter:	1.75 mm	Voltage:	24 v
Nozzle diameter:	0.4 mm

€327.00

€265.85 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.40mm

Zoom in

Description Increase the quality of your prints with the CHT Spider Coated Brass Nozzle from Bondtech. This nozzle provides more melting capacity, allowing you to print faster and save time. You can also make stronger prints due to the improved layer adhesion. The CHT Spider nozzle is compatible with the Creality Spider hotend (V1) and can be used with many different filaments, including PLA, TPU, Nylon and HIPS. The nozzle size is 0.40mm and is suitable for 1.75mm filament.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01372
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.60mm

Zoom in

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01373
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.80mm

Zoom in

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01374
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 1.00mm

Zoom in

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01375
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech SLS DDX Adapter for Mosquito hotends

Zoom in

Description This adapter can be used for the Bondtech DDX Direct Drive eXtruder for Creality. The adapter is necessary before the Mosquito hotend can be installed in a DDX Upgrade Kit.

Specifications

Brand:

Bondtech

Our item no:

DAR01433

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.50

(coming soon)

€9.35 Excl. 23% VAT

Bondtech LGX Lite V2 extruder

Zoom in

Description The LGX Lite V2 extruder from Bondtech uses a new dual drive technology that uses larger drive gears. These larger drive gears provide a better grip on the filament and are easy to maintain due to the maintenance windows. The filament tension lever comes with 3 settings: open, tight and flexible. The LGX Lite V2 is a lightweight extruder with improved heat resistance, tighter tolerances and a micro form factor. The extra mounting holes ensure easy mounting with multiple options. The extruder is compatible with round Nema14 stepper motors and has the classic, black Bondtech appearance.

Specifications

Brand:

Bondtech

Our item no:

DBO00108