Thermistors

Creality 3D CR-X Hotend Thermistor 100K | 60cm cable with connector

Description This Creality 3D hotend thermistor has a cable length of 60cm and is suitable for replacing the hotend thermistor of the following Creality printer models: CR-10S Pro, CR-X and the CR-10 V2. But it can also be used for other printers that use a 100K temperature sensor.

Specifications

Brand:	Creality 3D	Our item no:	DAR00043
Cable length:	60 cm

€8.50

€6.91 Excl. 23% VAT

EU warehouse

GEEETECH thermistor for A10, A20, A30 series

Zoom in

Description The GEEETECH thermistor is a reliable NTC temperature sensor used to accurately measure the temperature of the hot end or heating bed in GEEETECH 3D printers. Thanks to its high sensitivity and standard connector, this thermistor is easy to install and compatible with a wide range of GEEETECH models.

Key features:

NTC 100K thermistor for precise temperature measurement
Compatible with GEEETECH A10, A20, A30 series
Standard 2-pin JST connector for easy connection

Specifications

Brand:

Geeetech

Our item no:

DAR00670

€6.95

€5.65 Excl. 23% VAT

In stock

GEEETECH thermistor with cable for Prusa i3 Pro B 3D Printer, 70cm

Zoom in

Description Original Geeetech hotend thermistor to replace a defective thermistor on the i3 Pro B printer. The cable length is 70cm and is equipped with a 2 pin connector.

Specifications

Brand:	Geeetech	Our item no:	DAR00685
Cable length:	70 cm

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Flsun V400 hot end thermistor

Zoom in

Description Replace your thermistor with this Flsun hotend thermistor. This is an original replacement part for Flsun V400 3D printers.

Specifications

Brand:

Flsun

Our item no:

DAR01005

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Flsun SR/Q5 hotend thermistor

Zoom in

Description This original Flsun SR/Q5 hotend thermistor has a cable length of 18cm and is an original replacement part for Flsun 3D printers.

Specifications

Brand:	Flsun	Max temp:	300 °C
Cable length:	18 cm	Our item no:	DAR01015

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Plus) NTC 100kΩ thermistor

Zoom in

Description Replace your old thermistor of your Creality Ender-3 S1 or Ender-3 S1 Plus with this original Creality NTC 100kΩ thermistor.

Specifications

Brand:

Creality 3D

Our item no:

DAR01047

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge + Thermistor 100K | 24V, 40W | 1.25m

Zoom in

Description Set of a 24 volt 40 watt heater cartridge with a cable length of 125cm and a 100K thermistor with a 125cm cable pre-crimped with connector.

Specifications

Brand:	123-3D	Power rating:	40 W
Cable length:	125 cm	Our item no:	DAR01192
Mounting:	TH	Voltage:	24 v

€15.75

€12.80 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series hotend ceramic heater & thermistor (3-pack)

Zoom in

Description The ceramic heater and thermistor for Bambu Lab P1P 3D printer are combined into one module with an integrated terminal connector. With this design, the reliability of the terminal connector under extreme conditions is improved.

The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01323

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Bambu Lab X1 series hotend thermistor (3-pack)

Zoom in

Description The thermistor has highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly only.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01350

€21.50

€17.48 Excl. 23% VAT

EU warehouse

Creality 3D CR-M4 Thermistor

Zoom in

Description This Creality 3D NTC-0.55K Thermistor is an original replacement part for your 3D printer. The thermistor is 35mm long and contains a PH2.0-2P connection. This is suitable for the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Weight:	0.001 kg
Our item no:	DAR01393

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Elegoo Neptune 4 (Pro) Thermistor

Zoom in

Description Original thermistor for the Neptune 4 and 4 Pro, essential for accurate temperature measurement and reliable print quality. Easy installation and guaranteed compatibility.

Specifications

Brand:

Elegoo

Our item no:

DAR01519

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Elegoo Neptune 4 Plus & Max Thermistor

Zoom in

Description Original thermistor for the Neptune 4 Plus and 4 Max, essential for accurate temperature measurement and reliable print quality. Easy installation and guaranteed compatibility.

Specifications

Brand:

Elegoo

Our item no:

DAR01537

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Prusa Heatbed thermistor set (MK3/S/+, MINI/+)

Zoom in

Description This Prusa Heatbed thermistor set includes the following:

1 x Heatbed thermistor
1 x Kapton tape
1 x Aluminium tape

Specifications

Brand:	Prusa	Our item no:	DAR02404
Cable length:	6.5 cm

€13.61

€11.07 Excl. 23% VAT

In stock

Prusa Heatsink NTC thermistor 100k, 90mm

Zoom in

Description This product is a replacement NTC thermistor for the MK4 Heatsink.

This product includes:

1 x Thermistor NTC 100k - 90mm
1 x Grub screw M3x4

Specifications

Brand:	Prusa	Max temp:	300 °C
Dimensions:	90 mm	Our item no:	DAR02725

€12.95

€10.53 Excl. 23% VAT

In stock

Bondtech HeatLink Thermistor 300C

Zoom in

Description With this Heatlink Thermistor you are able to read temperatures up to 300 degrees Celsius.

The Thermistor can be used in combination with the following two heat links:

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00062
Cable length:	150 cm	Video instructions:	Instructional video
Max temp:	300 °C

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D semitec thermistor incl. sleeving 100k Ohm

Zoom in

Description This 100k thermistor is supplied with fiberglass insulation.

For the Marlin firmware you need the following setting:

#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Our item no:	DED00054
Max temp:	300 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.95 (coming soon)

€5.65 Excl. 23% VAT

E3D thermistor cartridge

Zoom in

Description The E3D Thermistor Cartridge is an easy to attach thermistor cartridge for the E3D V6 heaterblocks. The cartridge contains the Semitec 104GT thermistor. The cartridge housing is made of copper and the thermistor is secured with a high quality thermally conductive ceramic adhesive.

The cartridge comes with a cable with connector.

For the Marlin firmware you need the following setting:
#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Max temp:	280 °C
Cable length:	100 cm	Our item no:	DED00069
Diameter:	3 mm

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D Prusa MK2/MK3 specific thermistor

Zoom in

Description The E3D Prusa specific thermistor has a maximum temperature of 300 Celsius and is equipped with a molex microfit 3.0 connector. The cartridge comes with a 1m long connection cable. The thermistor has a diameter of 3mm and a length of 15mm.

Specifications

Brand:	E3D	Our item no:	DED00258
Max temp:	300 °C

€10.00

€8.13 Excl. 23% VAT

EU warehouse

Slice Engineering thermistor cartridge, 300°C

Zoom in

Description This original Mosquito thermistor cartridge from Slice Engineering is suitable for measuring ambient and printer temperatures up to 300°C.

Specifications

Brand:	Slice Engineering	Max temp:	300 °C
Cartridge diameter:	3 mm	Our item no:	DSE00009
Cartridge length:	200 cm

€35.00

€28.46 Excl. 23% VAT

EU warehouse

Thermistor 100K

Zoom in

Description With the standard thermistor 100K you can perform very stable temperature measurements (up to 250°C). Thanks to its very fast response time and compact size, the thermistor is pleasant to use. This thermistor is placed in a glass casing and can be used at the hot end or the heated bed of your 3D printer.

Downloads: Datasheet

Thermistor brand is: EPCOS
Thermistor type is: B57540G0104J
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Sensitivity index:	4066K
Max power:	18 mw	Thermal coefficient:	4.5 perc/°c
Mounting:	TH	Thermal time constant:	3 S
Probe diameter:	0.8 mm	Tolerance:	5
Our item no:	DTH00001

€4.25

€3.46 Excl. 23% VAT

In stock

Thermistor 100K pre-shrunk with connector, 1m

Zoom in

Description With this fast-responding 100K thermistor you can take accurate temperature measurements up to a maximum of 250°C.

The compact thermistor is neatly concealed in a piece of fiberglass and equipped with a pre-shrunk cable of 1 metre. The cable is heat resistant (up to 280°C) so that the thermistor functions perfectly when using ABS and PLA filament. The thermistor is equipped with a Molex connector that you can use to connect to Minitronics or Megatronics.

Thermistor brand is: EPCOS
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Mounting:	TH
Length:	1 m	Probe diameter:	0.15 mm
Max power:	18 mw	Probe length:	40 mm
Max temp:	260 °C	Our item no:	DTH00002

€6.95

€5.65 Excl. 23% VAT

In stock

Snapmaker thermistor

Zoom in

Description Snapmaker thermistor for the 3D print module of the Snapmaker 3-in-1.

Specifications

Brand:

Snapmaker

Our item no:

DTH00014

€6.00

€4.88 Excl. 23% VAT

EU warehouse

Semitec thermistor 100K NTC 104NT4R025H42G

Zoom in

Description With this 100K thermistor you can perform very stable temperature measurements ranging from -50°C to 300°C!

The thermistor comes with a high-quality glass coating and has a superior response speed. Ideal for use in combination with your hot end or heated bed! In addition, thanks to its compact size, it is very pleasant to use.

Thermistor brand is: Semitec
Thermistor type is: 104NT4R025H42G
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

NOTE: This thermistor requires an electronics board with a free analog input and 4K7 Ohm pull-up resistor.

Specifications

Brand:	123-3D	Our item no:	DTH00028
Max temp:	300 °C	Resistance tolerance:	3
Outer diameter:	0.8 mm

€4.00

€3.25 Excl. 23% VAT

EU warehouse

Thermistor 100K pre-shrunk with connector, 2m

Zoom in

Specifications

Brand:	123-3D	Mounting:	TH
Length:	2 m	Probe diameter:	0.15 mm
Max power:	18 mw	Probe length:	40 mm
Max temp:	260 °C	Our item no:	DTH00030

€7.95

€6.46 Excl. 23% VAT

In stock

Dyze thermistor with Molex connector 500°C

Zoom in

Description With this Dyze thermistor you can take accurate temperature measurements up to 500°C!

The thermistor features a Molex connector and an M5 thread for easy attachment of your Dyze hot end. The cable is provided with a black shrink tube and has a length of 10.2cm. At a temperature of 20°C the resistance is 5.2 MΩ and at 400°C it is 250 Ω.

CAUTION: Please update your firmware before getting started with this thermistor.

Specifications