Resin 3D Printers

Elegoo Saturn 4 Ultra 16K 3D printer DKI00322

Description Create stunning 3D prints with the plug-and-play Saturn 4 Ultra 16K 3D printer from Elegoo. Thanks to the 16K resolution, details are sharper than ever before. This printer has a build volume of 211.68mm x 118.37mm x 220mm, a resolution of 15120 x 6230 and a 14 x 19 µm XY resolution. With a printing speed of 150mm/h, 3D prints are quickly brought to life.

Handy & smart
The smart heating system heats the resin tank to 30˚C. This results in better layer adhesion and fluidity, which increases the quality of 3D prints. Thanks to the automatic bed levelling, the Saturn 4 Ultra is even easier to use. In addition, the 10 inch 16K Mono LCD screen offers unprecedented precision and an excellent level of detail. This means that even complicated models are printed perfectly. The screen has a robust 9H tempered glass protector, which protects it from scratches and damage. To prevent damage to the LCD screen, this 3D printer uses a smart mechanical sensor with residue detection. The sensor also gives a notification when there is a shortage of resin and when the bed is not level, so that incorrect 3D prints are prevented.

User friendly
The quick release design makes it easy to remove and replace parts. Replaceable retaining screws ensure a clog-free design, and dual pouring troughs make it even easier to pour resin from the tank. Use the reliable draining rack to work cleanly and safely. Switch between fast and slow print modes in an instant to match your printing speed to your needs.

Easily monitor the printing process in real time with the improved camera. The built-in light makes it possible to monitor your 3D print during the day and in the evening or to make time-lapse videos. In addition, a notification is given when the print deforms or when the build plate is empty. The exposure time of the different sections can be set separately, so that the optimal settings can be found, and PFA release film does not stick.

Safety
For added safety, the 3D printer automatically pauses and alerts when the LED temperature exceeds 80˚C. It is also possible to resume 3D printing after a power failure and the Saturn 4 Ultra can perform a quick self-test to ensure everything is working properly.

Other functionalities
It is possible to control multiple 3D printers, which makes workflows even more streamlined. Thanks to the laser-engraved build plate, there is a strong bed adhesion, which makes 3D prints less likely to deform or detach. However, 3D prints can be easily removed when they are finished.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Elegoo	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Manual:	Download	Max print depth:	11.83 cm
Network:	WiFi	Max print height:	22 cm
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print volume:	5.507
Input voltage:	100-240V	Max print width:	21.16 cm
Light source:	UV LCD	Printing technique:	SLA DLP
Printer bed levelling:	automatic	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00322
Camera included:	yes	Variant:	Saturn 4 Ultra 16K
Has CNC option:	no	Wavelength:	405 nm
Filament sensor:	no	Weight:	16.1 kg
Heated bed included:	no

Order now, we can ship this tomorrow!

€519.00

€421.95 Excl. 23% VAT

In stock

Elegoo Jupiter 2 3D printer

Zoom in

Description

The Elegoo Jupiter 2 is a large-format resin 3D printer for those who want to print large models or multiple objects simultaneously with high detail quality. Thanks to the 14-inch 16K LCD screen, automatic leveling, and automatic resin feeding, you work accurately and efficiently.

Key features:

Construction volume: 302 x 162 x 300 mm
14-inch 16K LCD with 20 x 26 µm XY resolution
Automatic resin supply, tank heating to 30 °C and built-in camera

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	648 x 465 x 508 mm	Max print depth:	30.2 cm
Input voltage:	100-240V	Max print height:	30 cm
Light source:	UV LCD	Max print volume:	14.496
Printer bed levelling:	automatic	Max print width:	16.1 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00379
Filament sensor:	no	Weight:	29 kg

NB:
Due to the weight/size, this product will be shipped by pallet. This item is expected in the second week of November .

Order now, we can ship this tomorrow!

€899.00

€730.89 Excl. 23% VAT

In stock

Anycubic Photon M3 Plus 3D Printer

Zoom in

Description The Photon M3 Plus is an enlarged version of the Photon M3. The printer has a 6K 9.25-inch monochrome screen and a build volume of 245mm x 197mm x 122mm. The screen has a resolution of 5760 x 3600 pixels and the light source consists of a 40 LED parallel matrix. Thanks to the large resolution and powerful matrix light source, the M3 Plus is able to print significantly larger and faster.

The printer is easy to control via a 5-inch landscape touchscreen with a clear interface. A laser-engraved build surface ensures that the prints adhere better to the build plate and the amount of resin present in the basin is monitored and automatically topped up if necessary.

Specifications

Brand:	Anycubic	Filament sensor:	no
UV wavelength:	405 nm	Heated bed included:	no
Network:	ethernet	Has laser option:	no
Dimensions:	47.5 x 36 x 29 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	12.2 cm
Max. Light Intensity:	7	Max print height:	24.5 cm
Light source:	UV LCD	Max print volume:	5.918
Output current:	6 A	Max print width:	19.8 cm
Power rating:	144 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00124
Camera included:	no	Weight:	12 kg
Has CNC option:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

Extra Information

3D Resin
Print bed accessories
Cleaning items

Order now, we can ship this tomorrow!

€593.00

€482.11 Excl. 23% VAT

In stock

Uniformation Gktwo 10.3" 8K Resin Printer

Zoom in

Description Take your prints to the next level with the GKtwo 10.3'' 8K Resin 3D printer from Uniformation. Thanks to the matrix parallel light source, it is possible to print extremely fine details, allowing you to effortlessly create highly detailed prints with this 3D printer. The GKtwo 10.3'' 8K has both an HD resolution of 7680 x 4320 and an XY resolution of 29.6μm.

User friendly
The 5-inch touchscreen has a user-friendly UI, making it easy to navigate between the different options. The LCD screen has a scratch-free protective film, which ensures that the screen cannot be damaged by leaking resin. This allows you to work on your creative ideas without any worries.

Choose convenience
It only takes 8 minutes for this printer to warm up to 35°C. This means you can start your 3D print nice and quickly. The built-in filter with carbon filter absorbs unpleasant and harmful odors. This will give you a pleasant 3D printing experience, without being bothered by the unpleasant odors that are normally released when printing with a resin 3D printer.

Other functionalities
This 3D printer has a construction volume of 228mm x 128mm x 245mm, so you can also make larger format prints. The build plate and resin barrel are both quick release, making them quick and easy to remove. You can remove them for maintenance in just 2 seconds. The compact design makes this printer ideal for every user: hobby and professional, in the office and at home.

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	work ethernet WiFi	Max print depth:	12.8 cm
Dimensions:	455 x 350 x 315 mm	Max print height:	24.5 cm
Input voltage:	110-220V	Max print volume:	7.15
Light source:	UV-COB	Max print width:	22.8 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00225
Has CNC option:	no	Weight:	19.05 kg
Filament sensor:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

Order now, we can ship this tomorrow!

€799.00

€649.59 Excl. 23% VAT

In stock

Elegoo Mars 5 4K 3D printer

Zoom in

Description Create amazing 3D prints with the Mars 5 resin 3D printer from Elegoo. This 3D printer has a build volume of 142.43mm x 89.6mm x 150mm and a maximum print speed of 70mm/h. The xy resolution is 35 x 35 µm (4098 x 2560) and the z-axis precision is 0.02mm. The 6.6 inch 4K mono LCD screen uses an advanced COB light source, bringing small details and textures to life. The smart mechanical sensor helps you get even more out of your 3D print. Thanks to the residue detection, damage to the LCD screen is prevented. In addition, the Mars 5 gives a notification when there is a shortage of resin and problems with levelling. This means you can always make high-quality 3D prints.

Convenience first
The Mars 5 makes it even easier for you with the automatic bed levelling. This 3D printer also comes with a simple self-check. The printer checks whether all parts are working properly before it starts 3D printing. In addition, you do not have to worry about overheating, because the 3D printer gives an alarm when overheating and stops printing when the LED temperature exceeds 80˚C. The efficient cooling system ensures that the Mars 5 has a longer lifespan and can continue to perform optimally.

Other functionalities
The quick release design makes it easy to assemble and replace parts. It is also durable and can be used with the Mars Mate air freshener. The Mars 5 comes with an FEP release film and a laser engraved build plate, which ensures that 3D prints adhere well.

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	no	Max print depth:	8.96 cm
Dimensions:	434 x 230 x 230 mm	Max print height:	15 cm
Input voltage:	100-240V	Max print volume:	1.927
Light source:	UV-COB	Max print width:	14.343 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00281
Has CNC option:	no	Variant:	Mars 5 4K
Filament sensor:	no	Weight:	8.26 kg

€179.00

€145.53 Excl. 23% VAT

EU warehouse

Elegoo Mars 5 Ultra 9K 3D printer

Zoom in

Description Print super-sharp details with the Mars 5 Ultra resin 3D printer from Elegoo. This 3D printer has a build volume of 153.36mm x 77.76mm x 165mm and a maximum print speed of 150mm/h. The 7 inch 9K mono LCD screen has an xy resolution of 18 µm (8520 x 4320) and a z-axis precision of 0.02mm, making all the small details pop out. This allows you to make high-quality or high-speed 3D prints.

User friendly
The Mars 5 Ultra’s convenient automatic features make this 3D printer suitable for users of all levels. With just 1 click, you can start automatic bed levelling or let the printer perform a self-check. This ensures that everything is ready to start 3D printing. When it is time to replace the release film, the printer will notify you. Thanks to the COB (chip-on-board) light source, there is consistent curing and the advanced high-temperature protection ensures that overheating does not occur. When the LED temperature exceeds 80˚C, the smart system will sound an alarm and stop 3D printing.

Convenience first
The AI camera helps detect and alert you to errors so your 3D prints don’t fail. You can also monitor your 3D printing process in real-time and create time-lapse videos. The smart mechanical sensor lets you know when there is residue left behind so you can fix it. You will also be notified when there is a shortage of resin and when there are issues with levelling. You can easily resume printing after a power outage. The laser-engraved build plate ensures that your 3D prints stay in place during printing.

Other functionalities
The quick release design makes it easy to replace parts and clean the printer. The dual gutters allow you to pour resin into the vat from multiple sides, maximising your efficiency. The drain rack prevents resin from spreading into the environment. The Mars 5 Ultra comes with a tempered glass screen protector and an intuitive touchscreen.

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	WiFi	Max print depth:	7.776 cm
Dimensions:	452 x 268 x 260 mm	Max print height:	16.5 cm
Input voltage:	100-240V	Max print volume:	1.967
Light source:	UV-COB	Max print width:	15.336 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00282
Has CNC option:	no	Variant:	Mars 5 Ultra 9K
Filament sensor:	no	Weight:	10.6 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€279.00

€226.83 Excl. 23% VAT

EU warehouse

Elegoo Saturn 2 3D printer

Zoom in

Description The Elegoo Saturn 2 is an 8K SLA 3D printer with a large build volume. The printer has a resolution of 7680 x 4320 and a pixel size of 28 micrometres. Thanks to a newly developed light source & mirror, the Saturn 2 is able to print with great precision.

For better Z-axis stability, the printer is equipped with double linear sliders over which the build plate moves by means of a lead screw. The film is tempered, which increases the life of the screen and there is a material peel detection.

Specifications

Brand:	Elegoo	Filament sensor:	no
UV wavelength:	405 nm	Heated bed included:	no
Network:	no	Has laser option:	no
Dimensions:	56.7 x 30.6 x 27.3 cm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	12.31 cm
Max. Light Intensity:	3.8	Max print height:	25 cm
Light source:	UV LCD	Max print volume:	6.733
Power rating:	96 W	Max print width:	21.88 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00121
Has CNC option:	no	Weight:	11 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

€457.00

€371.54 Excl. 23% VAT

EU warehouse

Anycubic Photon Mono 4 Ultra 3D printer

Zoom in

Description The Anycubic Photon Mono 4 Ultra has a 7 inch 10K display with a pixel size of 17 x 17 µm and a resolution of 9024 x 5120. This allows you to easily bring your creative ideas to life and capture every detail. The 4.3 inch HD touchscreen has a completely new UI design for an extra user-friendly and comfortable design.

Smart system
The smart support system helps you create perfect 3D prints and saves you up to 40% of the original printing time. In addition, the Photon Mono Ultra detects whether there is resin left behind so that you can clean it and the screen does not get damaged. The printer also keeps track of how much resin is left and gives a notification when it is too little. Printing is automatically stopped when a 3D print fails and you will receive a notification for other printing problems, such as cracks and detachment from the print bed.

Other functionalities
The Anycubic Photon is equipped with a new generation of ACF film, which has a positive effect on print time and release height. When this film has printed almost 30,000 layers, you will receive a notification to replace the film. This way you are always assured of the best quality. The advanced COB light source and Fresnel Lens provide precise 3˚ purple light, with which you can achieve an accuracy of approximately 0.01 - 0.05 mm. In combination with high speed resin, a speed of 120 mm can even be achieved. Use the Anycubic app ( iOS & Android ) to easily send print jobs via the cloud.

Please note : LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Anycubic	Filament sensor:	no
UV wavelength:	405 nm	Heated bed included:	no
Manual:	Download	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	430 x 236 x 231 mm	Max print depth:	15.34 cm
Input voltage:	110-220V	Max print height:	16.5 cm
Light source:	UV LED	Max print volume:	2.2
Power rating:	72 W	Max print width:	8.704 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00309
Has CNC option:	no	Weight:	5 kg

€279.00

€226.83 Excl. 23% VAT

EU warehouse

Anycubic Photon Mono M5 (12K) 3D printer

Zoom in

Description With the Anycubic Photon Mono M5 resin printer you can create models with razor-fine details. The 10.1-inch 12K monochrome LCD screen has a resolution of 11520 x 5120 and an XY pixel size of 19 x 24 µm. This way, even the smallest details are captured. The construction volume of 200mm x 218mm x 123mm offers enough space to give free rein to your creativity.

Professional and stable printing
The Photon Mono M5 provides a better printing experience thanks to the laser-engraved build plate. This means the print stays in place better and the chance of the model coming loose during printing is much smaller. The print will also deform less quickly. The z-axis dual linear rails and a POM nut provide highly precise z-axis movements without shaking. This way, the low noise is effectively reduced and details will be clearly visible.

Anycubic app and slicer
Easily use the printer together with the Anycubic app, which allows you to monitor your printing process. The Anycubic Photon Workshop 3.1 has a simplified UI that makes slicing easier. To increase the chance of success of your print, you can use the 'model repairing' function. The new support algorithm improves the stability of your prints, prevents damage to your model and makes it easier to remove supports.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	460 x 290 x 270 mm	Max print depth:	12.3 cm
Input voltage:	110-240V	Max print height:	20 cm
Light source:	UV LED	Max print volume:	5.363
Power rating:	100 W	Max print width:	21.8 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00190
Has CNC option:	no	Weight:	8.6 kg
Filament sensor:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

€367.00

€298.37 Excl. 23% VAT

EU warehouse

Anycubic Photon Mono M7 Pro 3D Printer

Zoom in

Description Bring all your ideas to life with the Anycubic Photon Mono M7 Pro resin 3D printer. Thanks to the construction volume of no less than 126mm x 223mm x 230mm, you can make both small and larger 3D prints. In combination with high-speed resin, this 3D printer can reach an impressive speed of up to 170mm/h. With normal resin this is still 130mm/h, allowing you to make prints quickly. Thanks to the new LightTurbo 3.0, you can capture every detail in 14K with a resolution of 13312 x 5120 and an xy resolution of 16.8µm x 24.8µm. In addition, you do not need to level this printer and it is ready to use right out of the box. This makes it a very user-friendly 3D printer for beginners and advanced users.

Intelligent printing system
The useful functions of the intelligent printing system make the 3D printing process even easier. For example, the resin vessel has a dynamic temperature control. The sensor detects and reports the temperature in real time, allowing you to adjust the temperature as necessary. This will make your prints even better. Within just 20 minutes the temperature has gone from 5˚C to 25˚C. You can also use the automatic resin refill function. This refills the barrel up to 750ml when there is not enough resin to complete a project.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	520 x 312 x 315 mm	Max print depth:	12.6 cm
Input voltage:	110-240V	Max print height:	23 cm
Light source:	UV LED	Max print volume:	6.46
Printer bed levelling:	automatic	Max print width:	22.3 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00266
Filament sensor:	no	Weight:	12.8 kg

€459.00

€373.17 Excl. 23% VAT

EU warehouse

Anycubic Photon Mono M7 Max 3D printer

Zoom in

Description The Anycubic Photon Mono M7 Max is a large 3D printer equipped with a 7.6-inch LCD screen and a 4K resolution (3840 x 2400 pixels) that delivers sharp and detailed prints. It supports large-scale printing with a build volume of 218mm x 123mm x 235mm. Utilising UV resin printing technology and faster processing, the Mono LCD system enables quicker printing and extends the lifespan of the screen. Additionally, it comes with an easy-to-use control system and automatic calibration features that make it convenient for users of all levels.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	WiFi	Max print depth:	16.4 cm
Dimensions:	652 x 425 x 362 mm	Max print height:	30 cm
Input voltage:	110-240V	Max print volume:	14.661
Light source:	UV LED	Max print width:	29.8 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00317
Has CNC option:	no	Weight:	24 kg
Filament sensor:	no

€699.00

€568.29 Excl. 23% VAT

EU warehouse

Anycubic Photon M3 Max 3D Printer

Zoom in

Description The Anycubic Photon M3 Max 3D is a large LCD resin printer with a 7K 13.6-inch monochrome screen and a resolution of 6480 x 3600 pixels. The M3 Max is capable of printing models of considerable size. Maximum light distribution is achieved by means of an 84 LED parallel matrix light source. To reduce loosening, a laser-engraved construction plate was chosen.

With a contrast ratio of 450 to 1, the success rate on complex models is significantly higher and the print has more consistent material properties. An advantage of the Photon M3 Max is that the printer is equipped with an automatic resin supply. This keeps track of how much resin is present in the vat and replenishes it if necessary. Controlling the printer is easy via the 4.3-inch resistive touch control.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	59.6 cm x 40 mm x 40.8 cm	Max print depth:	16.4 cm
Input voltage:	110-220V	Max print height:	30 cm
Light source:	UV LCD	Max print volume:	14.661
Output current:	6 A	Max print width:	29.8 cm
Power rating:	120 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00125
Camera included:	no	Video promo:	Video
Has CNC option:	no	Weight:	26 kg
Filament sensor:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

Extra Information

3D Resin
Print bed accessories
Cleaning items
Promotion video

€847.00

€688.62 Excl. 23% VAT

EU warehouse

Creality 3D Halot Mage Pro CL-103 3D printer

Zoom in

Description The Creality Halot Mage Pro CL-103 is a super fast resin 3D printer that prints no less than 170mm per hour. This printer is equipped with a professional 10.3'' 8K LCD screen and has a construction volume of 228mm x 128mm x 230mm³. The new, smart resin pump automatically controls the supply and discharge of resin. The printer can be filled or emptied within half an hour, so you no longer have to do this manually. The Halot Mage Pro CL-103 has a smart air purifier with a replaceable carbon filter, which reduces the unpleasant smell of printing with resin.

Print anywhere quickly and easily by controlling the printer remotely with the Creality Cloud app (available on IOS and Android). In addition, it is possible to control the printer from the computer or a USB stick and you can connect a USB camera so that you can monitor your print remotely. The Halot Mage Pro CL-103 uses the self-developed Halot OS, which has a clear UI and synchronizes data with your computer, telephone and Creality Cloud. The powerful CPU ensures that you can easily print at a high speed. The evenness of the light ensures consistent quality no matter where on the build plate printing takes place. The light intensity and the speed at which the layers are cured ensure a smooth finish and sharp contours.

Specifications

Brand:	Creality 3D	Filament sensor:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	work ethernet WiFi	Max print depth:	12.8 cm
Dimensions:	60.8 x 33.3 x 27 cm	Max print height:	23 cm
Input voltage:	100-240V	Max print volume:	6.712
Light source:	UV LCD	Max print width:	22.8 cm
Power rating:	150 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00166
Camera included:	no	Weight:	13 kg
Has CNC option:	no

€493.00

€400.81 Excl. 23% VAT

EU warehouse

Uniformation GK3 Pro 3D Printer Pre-Order

Uniformation GK3 Pro 3D Printer DKI00325

Zoom in

Description Pre-Order: This item is expected in late December/early January.

Get high-precision 3D printing with Uniformation's GK3 Pro 3D printer. The 16K 9.6-inch high-transmissivity display has a resolution of 15120 x 6230 and a pixel size of 14 x 19 µm. In addition, the display has a painted polariser for better performance and durability. The build volume of 211mm x 118mm x 240mm offers enough space for medium to large 3D prints. The printer comes with 3 print modes: 'precision', 'speed' and 'ultra mode'. This means there is a suitable option for every 3D print.

Smart & automatic
The smart automatic resin supply system monitors the resin level and ensures that there is enough resin for making the 3D print. In addition, not only the resin level in the barrel is monitored, but also that in the cartridge so that you can replace it in time. This 3D printer uses an automatic heating system for even heating of the resin. It comes with preheating and automatic temperature detection. It also heats up to 25˚C within 25 minutes.

Precision
This 3D printer has a shorter UV wavelength of 385nm, which allows for more precise control over curing. The collimating Fresnel lens refines the light from the COB, allowing for very precise refraction of light. This improves precision and detail in 3D prints.

User friendly
The quick release design of the build plate and resin vat make it easier to clean and replace parts. The drip tray helps to drain excess resin from the print before it cures. In addition, the touchscreen can be rotated 90˚ for easy operation. The built-in camera can be used to monitor the printing process and create time lapse videos.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to delivery.

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	-	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	520 x 392 x 332 mm	Max print depth:	21.1 cm
Input voltage:	110-220V	Max print height:	24 cm
Light source:	UV-COB	Max print volume:	5.975
Printer bed levelling:	manual	Max print width:	11.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00325
Filament sensor:	no	Weight:	17 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€809.95

€658.50 Excl. 23% VAT

EU warehouse

Piocreat Halot-X1 3D printer

Zoom in

Description The Piocreat Halot-X1 is an advanced resin 3D printer that excels in ease of use and precision. Featuring a 16K monochrome LCD screen and a unique no-leveling design, this printer is ideal for both beginners and professionals looking to produce high-quality prints without complex setups.

Key Features:

Building volume: 211.68mm × 118.37mm × 200mm
Print speed: up to 170mm/h
Layer height: 0.01mm – 0.2mm

Specifications

Brand:	Piocreat	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	WiFi	Max print depth:	21.16 cm
Dimensions:	43.4 x 34.4 x 33.1 cm	Max print height:	20 cm
Input voltage:	100-240V	Max print volume:	5.006
Light source:	UV LCD	Max print width:	11.83 cm
Power rating:	350 W	Printing technique:	SLA DLP
Printer bed levelling:	automatic	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00352
Camera included:	no	Variant:	Halot-X1
Has CNC option:	no	Weight:	12.75 kg
Filament sensor:	no

€649.00

€527.64 Excl. 23% VAT

EU warehouse

Piocreat Halot-X1 3D printer with Auto Feeding Unit (AFU)

Zoom in

Description The Piocreat Halot-X1 with Auto Feeding Unit (AFU) is a revolutionary resin 3D printer that combines ease of use, accuracy, and intelligent resin handling. Featuring a 16K LCD screen and fully automated resin management, this printer is perfect for demanding users who demand detail and efficiency.

Key Features:

Building volume: 211.68mm × 118.37mm × 200mm
Print speed: up to 170mm/h
Layer height: 0.01mm – 0.2mm

Specifications

Brand:	Piocreat	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	WiFi	Max print depth:	21.16 cm
Dimensions:	43.4 x 34.4 x 33.1 cm	Max print height:	20 cm
Input voltage:	100-240V	Max print volume:	5.006
Light source:	UV LCD	Max print width:	11.83 cm
Power rating:	350 W	Printing technique:	SLA DLP
Printer bed levelling:	automatic	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00353
Camera included:	no	Variant:	Halot-X1 + AFU
Has CNC option:	no	Weight:	12.75 kg
Filament sensor:	no

€679.00

€552.03 Excl. 23% VAT

EU warehouse

Goofoo3D Heated Resin Mixer

Zoom in

Description Improve the quality of your resin 3D prints with the resin mixer from Goofoo. This mixer shakes and heats your resin from all sides, making sure the resin is perfectly mixed and ready to use. You can use 3 settings: no heating, 40˚C or 50˚C. The machine is easy to operate by touching the display. You can use resin from many different brands, including standard bottle sizes such as 250g, 500g and 1kg.

Specifications

Dimensions:	170 x 270 x 125 mm	Our item no:	DAR01703
Input voltage:	100-240V	Voltage:	24 v
Power rating:	48 W	Weight:	1.3 kg

€86.50

€70.33 Excl. 23% VAT

EU warehouse

Elegoo Mars 4 Ultra 9K 3D printer

Zoom in

Description With the ELEGOO Mars 4 Ultra you can easily print complex models while retaining the smallest details. The 7-inch 9K mono LCD screen with 8520x4320 resolution and 18µm XY resolution ensures that you can make sharp prints in an instant. With the ELEGOO Mars 4 Ultra it is possible to achieve a printing speed of 150 mm per hour. The LCD screen is protected with a tempered glass plate, so that it is not damaged during daily use. With the built-in 4G RAM, you never have to worry about a delay in loading files again. The powerful Linux OS control ensures fast and smooth operation and by connecting to a 2.4G or 5G WiFi network, you can send models to the printer super quickly.

The build area of 153.36mm x 77.76mm x 165mm³ offers enough space to make medium-sized prints. The leveling system, which levels at 4 points, ensures that you can quickly start printing. The laser engraved surface of the build plate provides better layer adhesion and thus reduces the chance of the print failing. With the brand new ACF film you are assured of a successful print, even with a high print speed. The plug-in air filter has a new carbon filter that removes the unpleasant smell of printing with resin. Not only does this improve the printing experience, but you also print in a cleaner environment for yourself with less chance of ingesting toxic substances. Easily find your way via the user-friendly 4'' HD IPS touchscreen with a resolution of 800x480 pixels, which supports no fewer than 12 different languages.

The ELEGOO Mars 4 Ultra has a full metal machine housing, making the printer very stable and easy to use frequently. The modern design is also aesthetically pleasing to look at. The printer's internal components are protected from resin by a raised center plate.

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	44.35 x 22.7 x 22.7 mm	Max print depth:	15.636 cm
Input voltage:	100-240V	Max print height:	16.5 cm
Max. Light Intensity:	4	Max print volume:	2.006
Light source:	UV-COB	Max print width:	7.776 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00182
Has CNC option:	no	Weight:	17.3 kg
Filament sensor:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

€239.99

(coming soon)

€195.11 Excl. 23% VAT

Elegoo Saturn S 3D Printer

Zoom in

Description The printer does not only provide a better print speed and more build volume. The accuracy of the printer has also been improved. The printer uses a light source consisting of 54 individual UV LEDs to ensure rapid prototyping in a uniform manner. Together with 8x anti-aliasing, this creates a very smooth surface on your prints. The double linear rails on the Z axes also keep the printer stable.

A replaceable plug-in carbon filter ensures that the unpleasant resin smell that is normally released during printing is limited.

The Elegoo Saturn S LCD 3D printer is the larger and more efficient version of the Elegoo Saturn. The build volume of 196mm x 122mm x 210mm allows you to print larger models, or print a significant number of smaller models at once. The 9.1” LCD screen with 4098 x 2560 resolution ensures that the printing time per layer significantly decreases compared to other LCD 3D printers; by up to 2 to 3 seconds.

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	44.6 x 28 x 24 cm	Max print depth:	12.2 cm
Input voltage:	110-240V	Max print height:	21 cm
Max. Light Intensity:	3.8	Max print volume:	5.021
Light source:	UV LCD	Max print width:	19.6 cm
Power rating:	96 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00100
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	11 kg
Filament sensor:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

Extra information for printers

3D Resin
Print bed accessories
Cleaning items
Instructional video

€365.00

(coming soon)

€296.75 Excl. 23% VAT

Elegoo Saturn 8K 3D printer

Zoom in

Description The Elegoo Saturn 8K 3D printer has a 10-inch monochrome LCD screen with a resolution of 7680 x 4320 and a pixel size of 28 micrometers. The 3D models that this printer prints are therefore very detailed, with sharp edges and corners on a micro level. The curing time is only 1 to 3 seconds per resin layer, allowing high print speeds to be achieved. The printer has a large build volume of 219mm x 123mm x 250mm. This ensures that you can print larger models, or several small models at the same time in one batch. The adhesion is strong due to the construction board with sandblasted surface.

The double linear sliders provide an improved Z-axis stability of the 3D printer. Movements are quieter, more stable and more accurate thanks to the shock absorption units. The printer is also equipped with an air filter system with a carbon filter. The resin smell is absorbed for the most part, resulting in an odor-free environment!

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	46.2 x 28 x 24 cm	Max print depth:	12.3 cm
Input voltage:	100-240V	Max print height:	21 cm
Max. Light Intensity:	3.8	Max print volume:	5.63
Light source:	UV LED	Max print width:	21.8 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00143
Has CNC option:	no	Wavelength:	405 nm
Filament sensor:	no	Weight:	11 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

€338.40

(coming soon)

€275.12 Excl. 23% VAT

Uniformation GK3 3D Printer

Zoom in

Description Always super sharp 3D prints with the Uniformation GK3 3D printer. The fantastic 16K 9.6 inch mono LCD screen has a resolution of 15120 x 6230 and a pixel size of 14 x 19 µm. The build volume of 211mm x 118mm x 240mm offers enough space for medium to large 3D prints. The printer comes with 3 print modes: 'precision', 'speed' and 'ultra' mode. So there is a suitable option for every 3D print.

Smart & high precision
The smart automatic resin supply system monitors the resin level and ensures that there is enough resin for making the 3D print. In addition, not only the resin level in the barrel is monitored, but also that in the cartridge so that you can replace it in time. This 3D printer uses an automatic heating system for even heating of the resin. It comes with preheating and automatic temperature detection. It also heats up to 25˚C within 25 minutes. The collimating Fresnel lens refines the 405 nm light of the COB, which makes the light refract very precisely. This improves precision and detail level in 3D prints.

User friendly
The quick release design of the build plate and resin vat make it easier to clean and replace parts. The drip tray helps to drain excess resin from the print before it cures. In addition, the touchscreen can be rotated 90˚ for easy operation. The built-in camera can be used to monitor the printing process and create time lapse videos.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	-	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	520 x 392 x 332 mm	Max print depth:	21.1 cm
Input voltage:	110-220V	Max print height:	24 cm
Light source:	UV-COB	Max print volume:	5.975
Printer bed levelling:	manual	Max print width:	11.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00321
Filament sensor:	no	Weight:	16.5 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€755.50

(coming soon)

€614.23 Excl. 23% VAT

Uniformation Gktwo 10.3" 8K Resin Printer Bundle

Zoom in

Description This bundle contains:

1 x Uniformation Gktwo 10.3" 8K Resin Printer - more info
1 x Uniformation Ultrasonic Resin Cleaner - more info
1 x UniFormation 405nm UV Resin Curing Station 10.2" - more info

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	455 x 350 x 315 mm	Max print depth:	12.8 cm
Input voltage:	110-220V	Max print height:	24.5 cm
Light source:	UV-COB	Max print volume:	7.15
Printer bed levelling:	automatic	Max print width:	22.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00247
Filament sensor:	no	Weight:	19.05 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

€1,150.00

(coming soon)

€934.96 Excl. 23% VAT

Uniformation GK3 Ultra 16K 3D printer

Zoom in

Description Create stunning resin 3D prints with the GK3 Ultra 16K 3D printer from Uniformation. This printer has a maximum build volume of 300mm x 160mm x 300mm, an XY resolution of 15120 x 6230 and a pixel pitch of 20 x 26 µm. The 13.5 inch 16K mono LCD screen is 302.4mm x 161.98mm. This allows you to create large 3D prints with sharp details.

User friendly
Thanks to its convenient features, this 3D printer is very user-friendly. The lid opens upwards and the parts are easy to remove for maintenance or replacement. You can easily detach the build plate and place it on the drip hanger to let the excess resin drain before you let your 3D print cure. This prevents resin drips from curing, which can cause unevenness in the surface of your 3D print.

Smart features
The GK3 Ultra is equipped with an automatic resin supply system. This means you no longer have to worry about adding resin yourself. You place the resin bottle in the tank and it will automatically be guided to the barrel, even during 3D printing. This way, there is always enough resin available to make your 3D print. In addition, this system monitors whether there is any leftover resin. The smart auto-detection heat system constantly ensures the right temperature, so that your 3D prints can be printed even better.

Other functionalities
The GK3 is designed to be very sturdy. The dual linear rails ensure that the machine wobbles less. This creates tighter 3D prints and increases the quality of your prints. The printer uses 200W and the vat can hold 1100ml of resin. You can easily control this 3D printer via the 5 inch touchscreen and slice files with the UniFormation Slicer, Chitubox or Lychee. Send files via wifi, ethernet or use a USB stick.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Included with the GK3 Ultra:

Construction sheet
Resin barrel
Charging cable
USB stick
Screen protector
nFEP film
USB wifi
Tools (such as pliers, metal scraper, and a funnel)

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Manual:	Download	Printer has USB:	yes
Network:	work ethernet WiFi	Max print depth:	16 cm
Dimensions:	575 x 455 x 400 mm	Max print height:	30 cm
Input voltage:	110-220V	Max print volume:	14.4
Light source:	UV-COB	Max print width:	30 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00289
Has CNC option:	no	Weight:	30 kg
Filament sensor:	no

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€1,210.00

(coming soon)

€983.74 Excl. 23% VAT

Uniformation Cure3 Ultra Air Purifier (2-pack)

Zoom in

Description This air purifier is an original replacement part for the Cure3 Ultra from UniFormation. The package contains 2 pieces.

Specifications

Brand:	Uniformation	Quantity:	2
Dimensions:	85 x 114 x 124 mm	Weight:	0.3 kg
Our item no:	DAR01856

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50

(coming soon)

€23.17 Excl. 23% VAT

Elegoo Saturn 3 12K 3D printer

Zoom in

Description The Elegoo Saturn 3 resin printer has a 10'' 12K mono LCD screen with a tempered glass plate, which protects the screen from scratches and damage caused by resin leakage. The large build volume opens up a world of possibilities and is perfect for creating larger models and more ambitious projects. The COB (chip-on-board) light source and collimating Fresnel lens work together to create a uniform beam of light that shines onto the resin from the perfect angle. This creates very accurate prints with an exceptional level of detail.

The Saturn 3 12K also has a laser-engraved build plate for better adhesion of the first layer, allowing you to effortlessly print highly detailed and complicated models. The USB air purification filter ensures an odorless printing environment. This allows you to print without worries. You can also choose to use this printer in combination with the Elegoo Mars Mate. This resin printer uses the Voxeldance Tango software, which offers 3 options: static mode and dynamic mode (including smooth mode and high-speed mode).

The most important features:

LCD screen resolution of 11520x5120, XY resolution of 19x24 µm
218.88mm x 122.88mm x 250mm construction volume
COB light source with collimating Fresnel lens
Laser engraved building plate
USB air purification filter

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	56.73 x 30.59 x 27.3 cm	Max print depth:	12.3 cm
Input voltage:	100-240V	Max print height:	25 cm
Max. Light Intensity:	4.4	Max print volume:	6.703
Light source:	UV LCD	Max print width:	21.8 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00179
Has CNC option:	no	Wavelength:	405 nm
Filament sensor:	no	Weight:	15.2 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor

€29.95

This product is end of life.

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

Order now, we can ship this tomorrow!

€7.75

€6.30 Excl. 23% VAT

In stock

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity

Order now, we can ship this tomorrow!

€17.00

€13.82 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this tomorrow!

€76.50

€62.20 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro 2 repair/modification tool

Zoom in

Description The Modifi3D Pro 2 is the ultimate post-processing tool for your 3D printed objects. With this advanced tool, you can easily create repairs, modifications, and superfine finishes, faster, more precisely, and more comfortably than ever.

Thanks to its increased power, the Modifi3D PRO2 reaches temperatures of up to 480ºC (896ºF), making it suitable for a wide range of applications and tips. The tool heats up to 200ºC (392ºF) in less than 10 seconds.

The Pro 2 comes with 12 high-quality, specially coated tips that are easily interchangeable. This coating prevents plastic from sticking and ensures a long lifespan and precise results.

Knife tip: for cutting away support material
Large blade tip: for cutting away support material
Needle tip: for clearing small holes
Standard point: for general use
Spoon point: for removing threads and leveling surfaces
Large spoon tip: for removing threads and leveling surfaces
Detail point: for updating detail work
Smoothing point: for leveling surfaces
Countersinking point: for making countersink holes
Insertion point: for inserting metal parts
Pressure point: for pressing down or leveling surfaces.
Chisel point: for cutting off or shaping edges and corners straight.

All tips are fully compatible with the previous Modifi3D Pro version, allowing existing accessories to be used as usual.

Specifications

Brand:	Modifi3D	Power rating:	60 W
Cable length:	150 cm	Our item no:	DAR02554
Max operating temp:	480 °C	Voltage:	24 v

NB:
This article is expected in the last week of July .

€69.95

€56.87 Excl. 23% VAT

EU warehouse

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50

(coming soon)

€68.70 Excl. 23% VAT

Creality 3D Air Purifier - FDM

Zoom in

Description The Creality Air Purifier ‑ FDM is a powerful air purifier specifically developed for FDM 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features:

360° air purification with an airflow of up to 250 m³/h
5-stage filter system with HEPA and activated carbon filters
Touchscreen with real-time PM2.5 display

Specifications

Brand:	Creality 3D	Our item no:	DAR02819
Power rating:	360 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€595.50

(coming soon)

€484.15 Excl. 23% VAT

Creality 3D Air Purifier - Resin

Zoom in

Description The Creality Air Purifier ‑ Resin is a powerful air purifier specifically developed for Resin 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features:

360° air purification with an airflow of up to 250 m³/h
5-stage filter system with HEPA and activated carbon filters
Touchscreen with real-time PM2.5 display

Specifications

Brand:	Creality 3D	Our item no:	DAR02821
Dimensions:	430 x 460 x 270 mm	Weight:	10 kg
Power rating:	150 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€595.50

(coming soon)

€484.15 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

Resin 3D Printers

Popular products