View all flexible filaments

49 - 72 of 110

Bedrock 3D transparent TPU 85A filament 1.75mm, 0.75kg

Description This transparent TPU 85A filament from Bedrock 3D, supplied on a 0.75kg spool, offers excellent flexibility, abrasion resistance, and visual transparency. Ideal for functional, stretchy parts or visually appealing printed models where transparency and reliability are key.

Key Features:

Extremely stretchable: up to 600% elongation at break, ideal for flexible and load-bearing parts
High tear and abrasion resistance: resistant to repeated deformation, buckling and friction
Excellent interlayer adhesion: strong interlayer bonding prevents delamination during bending

Specifications

Amount:	0.75 kg	Material:	TPU 85A
Brand:	Bedrock 3D	Nozzle temp range:	200 - 220 °C
Colour:	transparent	Our item no:	DFB00270
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.2 cm
Heated bed temp:	40 °C

€53.95

€43.86 Excl. 23% VAT

EU warehouse

colorFabb varioShore blue TPU filament 1.75mm, 0.7kg

Zoom in

Description This blue colorFabb filament is a high-quality and lightweight TPU with a diameter of 1.75mm. You can determine the shore hardness of the material by adjusting the temperature and throughput. At temperatures between 200°C and 250°C, the material expands and softens. At temperatures between 190°C and 200°C you can create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	blue	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13207
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€51.50

€41.87 Excl. 23% VAT

In stock

colorFabb varioShore green TPU filament 1.75mm, 0.7kg

Zoom in

Description The green colorFabb filament is high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal print temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13209
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb varioShore natural TPU filament 1.75mm, 0.7kg

Zoom in

Description The natural-coloured colorFabb filament is high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13171
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€51.50

€41.87 Excl. 23% VAT

In stock

colorFabb varioShore red TPU filament 1.75mm, 0.7kg

Zoom in

Description The red colorFabb filament is high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput (speed and layer height). At temperatures between 200°C and 250°C, the material expands and softens. At a temperature between 190°C and 200°C you create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13213
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb varioShore black TPU filament 1.75mm, 0.7kg

Zoom in

Description This black colorFabb filament is a high-quality and lightweight TPU with a diameter of 1.75mm. You determine the shore hardness of the material by adjusting the temperature and throughput. At temperatures between 200°C and 250°C, the material expands and softens. At temperatures between 190°C and 200°C you can create harder prints. We advise you to choose this filament if you want to print insoles and cosplay parts, for example.

The ideal printing temperature is 190°C to 250°C. For best results, use a heated bed of 20°C to 40°C.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13169
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€51.50

€41.87 Excl. 23% VAT

In stock

colorFabb varioShore pale pink TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This pale pink colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in a natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb pale pink filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	pink	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13233
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€49.50

€40.24 Excl. 23% VAT

EU warehouse

colorFabb varioShore dark brown TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This dark brown colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in a natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb dark brown filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	brown	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13227
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€49.50

€40.24 Excl. 23% VAT

In stock

colorFabb varioShore medium brown TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This medium brown colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in a natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb medium brown filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	brown	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13229
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€49.50

€40.24 Excl. 23% VAT

EU warehouse

colorFabb varioShore natural TPU Prosthetic filament 1.75mm, 0.7kg

Zoom in

Description This natural colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

This colorFabb filament in a natural colour has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	190 - 250 °C
Filament diameter:	1.75 mm	Our item no:	DFP13231
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

eSun eFlex neutral filament 1.75mm, 1kg

Zoom in

Description The neutral flexible TPU consumables with a hardness of 87A are strong and durable; the printed product is softer than TPU-95A, but harder than the eLastic printed product.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	eSun	Our item no:	DFE20121
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 110 °C	Spool width:	6.5 cm
Material:	eFlex

€42.50

€34.55 Excl. 23% VAT

EU warehouse

eSun neutral ePA filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ePA Nylon filament has been developed on the basis of 6/66 copolymer. It has a high toughness and impact resistance. In addition, it hardly shrinks or breaks. ePA filament is ideal for printing objects that require high break resistance. It is possible to print the filament. This eSun ePA Nylon filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	eSun	Our item no:	DFE20038
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	ePA

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun neutral ePA-CF filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ePA-CF Nylon filament has been developed on the basis of 6/66 copolymer. It consists of 20% carbon fibre which ensures high strength, stiffness and toughness. This allows the filament to replace metal materials in many cases. This ePA-CF Nylon filament has excellent printability. Your prints get a matte surface with this filament. The material has a heat forming temperature of up to 155℃. In addition, it hardly shrinks, does not warp and does not crack. This eSun ePA-CF Nylon with carbon fibre filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 300 °C
Brand:	eSun	Our item no:	DFE20040
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePA-CF

€55.50

€45.12 Excl. 23% VAT

EU warehouse

eSun neutral PVA filament 1.75mm, 0.5kg

Zoom in

Description eSun's neutral PVA filament is soluble in warm water. You can edit it with PLA, TPU PA (nylon) and other consumables to print extremely complex shapes or support materials. This eSun PVA filament has a diameter of 1.75mm.

Specifications

Amount:	0.5 kg	Nozzle temp range:	180 - 210 °C
Brand:	eSun	Our item no:	DFE20119
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	3.5 cm
Material:	PVA

Order now, we can ship this tomorrow!

€46.50

€37.80 Excl. 23% VAT

In stock

NinjaTek Cheetah Fire TPU SemiFlex filament 1.75mm, 1kg

Zoom in

Description This Fire red Cheetah 3D filament (1.75mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	red	Our item no:	DFF02033
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€72.50 (coming soon)

€58.94 Excl. 23% VAT

NinjaTek Cheetah Midnight TPU SemiFlex filament 1.75mm, 0.5kg

Zoom in

Description This Midnight black Cheetah 3D filament (1.75mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Read more about printing with TPU filament here.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	black	Our item no:	DFF02030
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	170 m

Order now, we can ship this tomorrow!

€46.50

€37.80 Excl. 23% VAT

In stock

NinjaTek Cheetah midnight black TPU filament 1.75mm, 1kg

Zoom in

Description This midnight black SemiFlex 3D filament (1.75mm) is a flexible TPU filament type, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	black	Our item no:	DFF02018
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€76.50

€62.20 Excl. 23% VAT

EU warehouse

NinjaTek Cheetah Snow TPU SemiFlex filament 1.75mm, 0.5kg

Zoom in

Description This Snow white Cheetah 3D filament (1.75mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Cheetah can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable. The Cheetah filament is best printed on the ABS settings of your 3D printer.

Read more about printing with TPU filament here.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	white	Our item no:	DFF02031
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	170 m

Order now, we can ship this tomorrow!

€46.50

€37.80 Excl. 23% VAT

In stock

NinjaTek Chinchilla NT midnight black TPE filament 1.75mm, 0.5kg

Zoom in

Description NinjaTek Chinchilla NT midnight black is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 0.5kg filament of 1.75mm. NinjaTek Chinchilla NT midnight black has been tested for skin safety.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	metallic midnight black	Our item no:	DFF02105
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Hardness:	75A	Spool width:	5.5 cm
Heated bed temp:	20 - 40 °C

Order now, we can ship this tomorrow!

€57.50

€46.75 Excl. 23% VAT

In stock

NinjaTek Chinchilla NT midnight black TPE filament 1.75mm, 1kg

Zoom in

Description NinjaTek Chinchilla NT in midnight black is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 1kg of filament of 1.75mm. NinjaTek Chinchilla NT midnight black has been tested for skin safety.

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	metallic midnight black	Our item no:	DFF02107
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Hardness:	75A	Spool width:	5.5 cm
Heated bed temp:	20 - 40 °C

€97.50

€79.27 Excl. 23% VAT

EU warehouse

NinjaTek Chinchilla NT snow white TPE filament 1.75mm, 0.5kg

Zoom in

Description NinjaTek Chinchilla NT snow white is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 0.5kg filament of 1.75mm. NinjaTek Chinchilla NT snow white has been tested for skin safety.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	snow white	Our item no:	DFF02101
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Hardness:	75A	Spool width:	5.5 cm
Heated bed temp:	20 - 40 °C

Order now, we can ship this tomorrow!

€57.50

€46.75 Excl. 23% VAT

In stock

NinjaTek Chinchilla NT snow white TPE filament 1.75mm, 1kg

Zoom in

Description NinjaTek Chinchilla NT snow white is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 1kg of filament of 1.75mm. NinjaTek Chinchilla NT Snow has been tested for skin safety.

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	snow white	Our item no:	DFF02103
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Hardness:	75A	Spool width:	5.5 cm
Heated bed temp:	20 - 40 °C

€97.50

€79.27 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex lava orange TPU filament 1.75mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, NinjaFlex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Specifications

Amount:	0.5 kg	Length:	170 m
Brand:	NinjaTek	Material:	TPU 85A
Colour:	orange	Nozzle temp range:	220 - 230 °C
Download TDS:	Download	Our item no:	DFF02007
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex midnight black TPU filament 1.75mm, 1kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	black	Our item no:	DFF02077
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

Order now, we can ship this tomorrow!

€79.50

€64.63 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

View all flexible filaments

Popular products