Buy 3D printers, filament, parts & tools | lowest prices

REAL neutral PA filament 2.85mm, 0.5kg DFN02007

Description This neutral PA (2.85mm) filament is professional, strong and made from nylon. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used with almost all FFF and FDM printers.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	240 - 260 °C
Colour:	neutral	Our item no:	DFN02007
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	80 - 100 °C	Inner diameter:	Ø 5.5 cm
Length:	75 m	Outer diameter:	Ø 20.0 cm
Material:	Nylon	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€39.50 (coming soon)

€32.11 Excl. 23% VAT

REAL white PA filament 2.85mm, 0.5kg

Zoom in

Description The white PA (2.85mm) is a professional, very strong nylon filament. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used on almost all FFF and FDM printers.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	245 - 280 °C
Colour:	white	Our item no:	DFN02015
Filament diameter:	2.85 mm	Roundness:	>95%
Filament print speed:	-	Inner diameter:	Ø 5.6 cm
Heated bed temp:	80 - 105 °C	Outer diameter:	Ø 20.0 cm
Length:	75 m	Spool width:	7.0 cm
Material:	PA Low Warp

Order extras:

KWB Putty knife, 40mm

€3.95

3DLAC Plus adhesive spray, 100ml

€7.75

Modifi3D repair/modification tool

€34.75

Multi-tool set (162-pack)

€59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack)

€74.50

€39.50

€32.11 Excl. 23% VAT

EU warehouse

REAL black PA filament 2.85mm, 0.5kg

Zoom in

Description The black PA (2.85mm) is a professional, very strong nylon filament. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used on almost all FFF and FDM printers.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	280 - 320 °C
Colour:	black	Our item no:	DFN02013
Filament diameter:	2.85 mm	Roundness:	>95%
Filament print speed:	-	Inner diameter:	Ø 5.6 cm
Heated bed temp:	80 - 105 °C	Outer diameter:	Ø 20.0 cm
Length:	75 m	Spool width:	7.0 cm
Material:	PA Low Warp

Order extras:

KWB Putty knife, 40mm

€3.95

3DLAC Plus adhesive spray, 100ml

€7.75

Modifi3D repair/modification tool

€34.75

Multi-tool set (162-pack)

€59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack)

€74.50

€39.50

€32.11 Excl. 23% VAT

EU warehouse

BASF Ultrafuse neutral PA filament 2.85mm, 0.75kg

Zoom in

Description Ultrafuse PA filament from BASF consists of polyamide and is characterised by high resistance to deformation and great flexibility. That makes it a suitable filament type for use in moving parts. The neutral filament has a diameter of 2.85mm. The print temperature is between 220°C and 250°C, and the glass transition temperature of the filament is 49°C.

Specifications

Amount:	0.75 kg	Material:	PA
Brand:	BASF	Nozzle temp range:	220 - 250 °C
Colour:	neutral	Our item no:	DFB00047
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm

€53.50

€43.50 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black PAHT CF15 filament 2.85mm, 0.75kg

Zoom in

Description This Ultrafuse PAHT CF15 filament from BASF is made of polyamide with extra high heat resistance. The filament can withstand prolonged exposure to temperatures of up to 130°C. The black-coloured filament has a diameter of 2.85mm. The print temperature is between 260°C and 280°C.

Specifications

Amount:	0.75 kg	Material:	PAHT CF15
Brand:	BASF	Nozzle temp range:	260 - 280 °C
Colour:	black	Our item no:	DFB00049
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Spool width:	5.2 cm

€73.50

€59.76 Excl. 23% VAT

EU warehouse

colorFabb matte black PA-CF low warp filament 2.85mm, 0.7kg

Zoom in

Description This matte black colorFabb PA-CF Low Warp filament (2.85mm) is professional and very strong. The most important properties are the high tensile strength, great heat resistance and many carbon fibres. With this colorFabb PA-CF Low Warp filament you'll have almost no problems with warping and you can also print large 3D prints with confidence.

The ideal printing temperature for this nylon filament is 260°C to 280°C. For best results, set the heated bed to 50°C.

Specifications

Amount:	0.7 kg	Material:	PA-CF
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	matte black	Nozzle temp range:	260 - 280 °C
Filament diameter:	2.85 mm	Our item no:	DFP13069
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

€87.75

€71.34 Excl. 23% VAT

EU warehouse

Polymaker CoPA black Nylon filament 2.85mm, 0.75kg

Zoom in

Description The black Polymaker CoPA filament is very strong, tough and heat resistant up to 180˚C. This filament is produced with Warp Free technology, so you will not suffer from warping (distortion). The filament comes in the colour black, has a diameter of 2.85mm and is easy to print.

Specifications

Amount:	0.75 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14003
Colour:	black	Spool empty weight:	± 125 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	CoPA Nylon

€72.50

€58.94 Excl. 23% VAT

EU warehouse

Polymaker clear Nylon CoPA filament 2.85mm, 0.75kg

Zoom in

Description The neutral Polymaker CoPA filament is very strong, tough and heat resistant up to 180˚C. This filament is produced with Warp Free technology, so you do not suffer from warping (deformation). The filament in black has a diameter of 2.85mm and is easy to print.

Specifications

Amount:	0.75 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14286
Colour:	transparent	Spool empty weight:	± 125 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	CoPA Nylon

€73.50

€59.76 Excl. 23% VAT

EU warehouse

Polymaker PolyMide grey PA6-GF filament 2.85mm, 2kg

Zoom in

Description Polymaker PolyMide PA6-GF filament in the colour grey is a glass fibre reinforced nylon. This material has very good thermal properties and does not affect the layer adhesion. The filament contains 20% ground glass fibers, so we recommend using a wear-resistant nozzle. The grey filament has a diameter of 2.85mm and a weight of 2kg.

Specifications

Amount:	2 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14123
Colour:	grey	Spool empty weight:	± 370 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 26.8 cm
Heated bed temp:	25 - 50 °C	Spool width:	10.0 cm
Material:	PA6-CF

€167.50

€136.18 Excl. 23% VAT

EU warehouse

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

Order now, we can ship this today!

€8.50

€6.91 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

Order now, we can ship this today!

€9.75

€7.93 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Order now, we can ship this today!

€12.75

€10.37 Excl. 23% VAT

In stock

BIQU Panda Storage Rack for 3D filament

Zoom in

1
0

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50 (coming soon)

€51.63 Excl. 23% VAT

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

Order now, we can ship this today!

€26.50

€21.54 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this today!

€76.50

€62.20 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75

€28.25 Excl. 23% VAT

In stock

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Filament diameter:	1.75 mm
Manual:	Download	Our item no:	DAR01819

Order now, we can ship this today!

€42.50

€34.55 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm -

€5.25

Order now, we can ship this today!

€4.75

€3.86 Excl. 23% VAT

In stock

3DLAC Nylon, 30ml

Zoom in

Description 3DLAC Nylon is ideal for creating strong, detailed prints with a long lifespan. It is specially designed to work seamlessly with nylon filaments. This allows you to produce precise, high-quality prints. 3DNylon provides better bed adhesion to nylon filaments, making it easier to print detailed models. In addition, the filament layers will form a strong bond and will not come loose during printing. This bond extends the lifespan of your print and helps to reduce fragility. Finally, it ensures that your print does not warp or curl during the printing process. The user-friendly brush makes it easy to use this product.

Specifications

Brand:	3DLAC	Dimensions:	55 mm
Diameter:	37 mm	Our item no:	DAR01371
Download SDS:	Download	Volume:	30ml

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

2.85mm Nylon

Popular products