PLA

At 123-3D.ie you will find a selection of PLA filament, ranging in colour and effects. You can find your desired filament by searching by diameters (1.75mm and 2.85mm) or type of PLA. Order your PLA filament from 123-3D.ie for fast delivery in Ireland.

625 - 648 of 894

eSun purple PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's purple PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20100
Colour:	purple	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	6.5 cm
Material:	PLA+	Variant:	Spool

Colour:

Filament diameter:

Variant:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Spectrum navy blue PLA Matte filament 1.75mm, 1kg

Zoom in

Description This navy blue Spectrum PLA Matte filament is a PLA filament with a matte appearance. This gives your 3D print a unique look and the layer lines are less noticeable. In addition, this filament has all the properties of normal PLA. It is easy to print, shrinks little and has good adhesion between the layers. In addition, this filament has an improved temperature resistance, impact resistance and is less brittle. This is a 1.75mm navy blue filament on a 1kg spool.

Specifications

Amount:	1 kg	Material:	PLA Matt
Brand:	Spectrum	Nozzle temp range:	190 - 230 °C
Colour:	blue	Our item no:	DFS10056
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

eSun natural ePLA-LW filament 1.75mm, 1kg

Zoom in

Description eSun ePLA-LW Natural is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20225
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-LW

Colour:

black

white

€38.00

€30.89 Excl. 23% VAT

EU warehouse

ColorFabb iron grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour iron grey, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	iron grey	Our item no:	DFP16092
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb sky blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a sky blue colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	sky blue	Our item no:	DFP16077
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb pearl dark grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a pearl dark grey colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	pearl dark grey	Our item no:	DFP16075
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb agate grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	agate grey	Our item no:	DFP16091
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb grey blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	grey blue	Our item no:	DFP16084
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb tele grey 2 High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	telegrey	Our item no:	DFP16093
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€27.95

€22.72 Excl. 23% VAT

EU warehouse

Spectrum granite grey Premium High Speed PLA filament 1.75mm, 1kg

Zoom in

Description The granite grey Premium High Speed PLA is a filament specially designed for printing at high speeds, up to 600mm/s. The improved mechanical properties ensure that this filament performs well, even when printing at high speed. It has improved impact resistance and excellent layer adhesion. In addition, it has a high flow, cools quickly and can print details very precisely. This makes Premium High Speed PLA very suitable for both making rapid prototypes and making decorative items. The 1.75mm filament is made of 100% organic material and contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA High Speed
Brand:	Spectrum	Nozzle temp range:	190 - 250 °C
Colour:	granite grey	Our item no:	DFS10041
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

Spectrum dark grey Premium PLA filament 1.75mm, 1kg

Zoom in

Description This 1.75mm dark grey filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA Premium
Brand:	Spectrum	Nozzle temp range:	185 - 215 °C
Colour:	dark grey	Our item no:	DFS10006
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Spectrum light grey Premium PLA filament 1.75mm, 1kg

Zoom in

Description This 1.75mm light grey filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA Premium
Brand:	Spectrum	Nozzle temp range:	185 - 215 °C
Colour:	light grey	Our item no:	DFS10013
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun Very Peri PLA+ filament 1.75mm, 1kg

Zoom in

Description The Very peri PLA+ filament from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 210 °C
Brand:	eSun	Our item no:	DFE20281
Colour:	very peri	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	6.5 cm
Material:	PLA+	Variant:	Spool

Colour:

€27.50

€22.36 Excl. 23% VAT

EU warehouse

eSun almond yellow ePLA-Matte filament 1.75mm, 1kg

Zoom in

Description This eSun ePLA-Matte filament in the colour Almond Yellow is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20257
Colour:	almond	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm
Material:	PLA-Matte

Colour:

€24.00

€19.51 Excl. 23% VAT

EU warehouse

ColorFabb sapphire blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	sapphire blue	Our item no:	DFP16082
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

Flashforge blue HS PLA filament 1.75mm, 1kg

Zoom in

Description Make fast 3D prints with this blue HS PLA filament from Flashforge. It is specially designed for high speed printing, without compromising on quality. With this filament you are assured of excellent layer adhesion, minimal warping and strong mechanical properties, making it ideal for both prototypes and functional parts. The filament has a diameter of 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	HS PLA
Brand:	Flashforge	Nozzle temp range:	190 - 240 °C
Colour:	blue	Our item no:	DFP16053
Download SDS:	Download	Inner diameter:	Ø 5.2 cm
Download TDS:	Download	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	25 - 60 °C

Colour:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

eSun eSilk dark yellow PLA filament 1.75mm, 1kg

Zoom in

Description eSun's dark yellow eSilk PLA filament has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	eSun	Our item no:	DFE20195
Colour:	dark yellow	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	eSilk PLA

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Spectrum navy blue Premium High Speed PLA filament 1.75mm, 1kg

Zoom in

Description The navy blue Premium High Speed PLA is a filament specially designed for printing at high speeds, up to 600mm/s. The improved mechanical properties ensure that this filament performs well, even when printing at high speed. It has improved impact resistance and excellent layer adhesion. In addition, it has a high flow, cools quickly and can print details very precisely. This makes Premium High Speed PLA very suitable for both making rapid prototypes and making decorative items. The 1.75mm filament is made of 100% organic material and contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA High Speed
Brand:	Spectrum	Nozzle temp range:	190 - 250 °C
Colour:	navy blue	Our item no:	DFS10039
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

Spectrum anthracite grey Premium PLA filament 1.75mm, 1kg

Zoom in

Description This 1.75mm anthracite grey filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA Premium
Brand:	Spectrum	Nozzle temp range:	185 - 215 °C
Colour:	anthracit grey	Our item no:	DFS10000
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

ColorFabb ultra navy blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	ultra navy blue	Our item no:	DFP16085
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb azure blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	azure blue	Our item no:	DFP16083
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb pastel blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	pastel blue	Our item no:	DFP16086
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

Spectrum baby blue Premium High Speed PLA filament 1.75mm, 1kg

Zoom in

Description The baby blue Premium High Speed PLA is a filament specially designed for printing at high speeds, up to 600mm/s. The improved mechanical properties ensure that this filament performs well, even when printing at high speed. It has improved impact resistance and excellent layer adhesion. In addition, it has a high flow, cools quickly and can print details very precisely. This makes Premium High Speed PLA very suitable for both making rapid prototypes and making decorative items. The 1.75mm filament is made of 100% organic material and contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA High Speed
Brand:	Spectrum	Nozzle temp range:	190 - 250 °C
Colour:	baby blue	Our item no:	DFS10038
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

eSun magenta PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's PLA+ magenta filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20279
Colour:	magenta	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA+	Variant:	Spool

Colour:

€27.50

€22.36 Excl. 23% VAT

EU warehouse

Buying PLA filament for your 3D printer? Order online at 123-3D.ie!

With PLA filament for your 3D printers, you can easily print all kinds of 3D objects. In addition to standard PLA filament with a diameter of 1.75mm or 2.85/3mm in many colours, you can also choose PLA with special effects, such as glow in the dark or fluorine. There is also PLA filament with wood or metal particles. With this, your 3D-printed objects don't look like they're made of plastic, but have the appearance of a different material. This expands the possibilities of your 3D printer even more!

When ordering PLA filament, pay close attention to the diameter of the filament. PLA filament is a very easy filament type to print with and has few requirements. For example, a heated bed is optional, so you can also 3D print with PLA without a heated bed.

Read more information on PLA filament here.

Do you have any questions about ordering from 123-3D.ie? Check out our Frequently Asked Questions page! Some questions are already answered here.

Quantity	Product
No products
Total: €0.00

PLA

Buying PLA filament for your 3D printer? Order online at 123-3D.ie!

Popular products