1.75mm ABS filament

Sort

eSun blue ABS+ filament 1.75mm, 1kg DFE20014

Description eSun's blue ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20014
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun cold white ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's cold white ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Material:	ABS+
Brand:	eSun	Nozzle temp range:	230 - 270 °C
Colour:	cold white	Our item no:	DFE20124
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 mm
Heated bed temp:	95 - 110 °C	Outer diameter:	Ø 20.0 mm
Length:	400 m	Spool width:	6.5 mm

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun yellow ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's yellow ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20016
Colour:	yellow	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun grey ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's grey ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20018
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun green ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's green ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20019
Colour:	green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun light blue ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's light blue ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20021
Colour:	light blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun neutral ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20023
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun neon green ABS+ filament 1.75mm, 1kg

Zoom in

Description The neon green ABS+ filament from eSun has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20024
Colour:	peak green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun orange ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's orange ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20025
Colour:	orange	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun purple ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's purple ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20026
Colour:	purple	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun red ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's red ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75 mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20027
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun silver ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's silver ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20030
Colour:	silver	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun black ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's black ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20031
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun black eABS MAX filament 1.75mm, 1kg

Zoom in

Description eSun's black eABS MAX filament has excellent mechanical properties, flame retardancy, high toughness and impact resistance. The material is ideal for printing parts for cars, machines and electronics. Use the filament when printing at high temperatures. This eSun eABS MAX filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 240 °C
Brand:	eSun	Our item no:	DFE20037
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 100 °C	Spool width:	6.5 cm
Material:	eABS Max

Order now, we can ship this today!

€35.50

€28.86 Excl. 23% VAT

In stock

eSun pine green ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's pine green ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20015
Colour:	pine green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this today!

€25.50

€20.73 Excl. 23% VAT

In stock

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

Order now, we can ship this today!

€8.50

€6.91 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

€9.75

€7.93 Excl. 23% VAT

EU warehouse

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Variant:

Nylon (30 ml)

Plus (100 ml)

Stick (80 ml)

Order now, we can ship this today!

€12.75

€10.37 Excl. 23% VAT

In stock

BIQU Panda Storage Rack for 3D filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50

(coming soon)

€51.63 Excl. 23% VAT

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

Order now, we can ship this today!

€26.50

€21.54 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Filament diameter:	1.75 mm
Manual:	Download	Our item no:	DAR01819

Order now, we can ship this today!

€42.50

€34.55 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications