1.75mm PLA filament

Sort

colorFabb bronze Bronzefill filament 1.75mm, 0.75kg

Description This special bronze PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Bronzefill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 0.75kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Bronzefill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	bronze	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13149
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb bronze Bronzefill filament 1.75mm, 1.5kg

Zoom in

Description This special bronze PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Bronzefill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 1.5kg. The recommended print temperature is 195°C to 220°C and the print speed is 40mm/s to 100mm/s.

Specifications

Amount:	1.5 kg	Material:	Bronzefill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	bronze	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13148
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb copper Copperfill filament 1.75mm, 0.75kg

Zoom in

Description This special copper PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Copperfill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 0.75kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Copperfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	copper	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13153
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Amount:

Filament diameter:

Order now, we can ship this tomorrow!

€51.50

€41.87 Excl. 23% VAT

In stock

colorFabb copper Copperfill filament 1.75mm, 1.5kg

Zoom in

Description This special copper PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Copperfill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 1.5kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	1.5 kg	Material:	Copperfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	copper	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13152
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb cork Corkfill filament 1.75mm, 0.65kg

Zoom in

Description Give prints a special look with colorFabb cork filament. Corkfill is combined with PLA/PHA, but is much lighter than standard PLA. The filament has a dark brown colour and is a perfect addition to your current collection. This filament has a diameter of 1.75mm and weighs 0.65kg. The recommended print temperature is 210 to 230°C and the print speed is 40 to 60mm/s.

Specifications

Amount:	0.65 kg	Material:	Corkfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	cork	Nozzle temp range:	210 - 230 °C
Filament diameter:	1.75 mm	Our item no:	DFP13156
Filament print speed:	40-60 mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Filament diameter:

1.75 mm

2.85 mm

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb wood Woodfill filament 1.75mm, 0.6kg

Zoom in

Description Woodfill colorFabb filament consists of PLA/PHA and recycled wood fibres. You can create beautiful wooden objects with a light brown colour in no time at all. This filament has a diameter of 1.75mm and a weight of 0.6kg. We recommend a print temperature of 195 to 220°C and a print speed of 40 to 100mm/s. Because this filament is based on PLA, it is very easy to print with (without a heated bed), with a nozzle of 0.5mm or larger.

Specifications

Amount:	0.6 kg	Material:	Wood fill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	wood	Nozzle temp range:	190 - 210 °C
Filament diameter:	1.75 mm	Our item no:	DFP13164
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Filament diameter:

1.75 mm

2.85 mm

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb glow in the dark-green Glowfill filament 1.75mm, 0.75kg

Zoom in

Description Bring light into the darkness with the green colorFabb glow-in-the-dark filament. Glowfill has a beautiful, creamy white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 1.75mm. We recommend a print temperature of 195 to 220°C and a print speed of 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Glowfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	green glow in the dark	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13158
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Filament diameter:

1.75 mm

2.85 mm

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	grey/silver	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13020
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb natural LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour natural has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13022
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb red LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour red has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13024
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb black LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13018
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	yellow	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13193
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb green LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13191
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb dark blue PLA economy filament 1.75mm, 2.2kg

Zoom in

Description This colorFabb filament in the colour dark blue has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	dark blue	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13096
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€43.50

€35.37 Excl. 23% VAT

In stock

colorFabb light grey PLA Economy filament 1.75mm, 2.2kg

Zoom in

Description This light grey colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	light grey	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13098
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Colour:

Filament diameter:

€43.50

€35.37 Excl. 23% VAT

EU warehouse

colorFabb white PLA Economy filament 1.75mm, 2.2kg

Zoom in

Description This white colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	white	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13104
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€43.50

€35.37 Excl. 23% VAT

In stock

colorFabb silver PLA economy filament 1.75mm, 2.2kg

Zoom in

Description This silver-coloured colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	silver	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13102
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€43.50

€35.37 Excl. 23% VAT

In stock

colorFabb black PLA economy filament 1.75mm, 2.2kg

Zoom in

Description This colorFabb filament in the colour black has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13094
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Colour:

Filament diameter:

€43.50

€35.37 Excl. 23% VAT

EU warehouse

colorFabb PLA filament on RAL colour 1.75mm, 0.75kg

Zoom in

Description Print any desired object with your favorite RAL colour. The colorfabb PLA filament can be ordered for any RAL colour, so that every project can be printed in the right colour.

The threshold for custom colours has never been lower. You can now order any colour you can imagine. This makes your projects more vibrant than ever.

The filament has a diameter of 1.75mm and a weight of 0.75kg.

During the ordering process you can indicate the correct RAL colour(s) in the 'Questions/Remarks' box.

This item is made on request at the supplier and will be delivered within 2 weeks at the latest.

Specifications

Amount:	0.75 kg	Material:	PLA
Brand:	colorFabb	Max deviation:	± 0.05
Colour:	RAL colour	Nozzle temp range:	195 - 220 °C
Download TDS:	Download	Our item no:	DFP13225
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Length:	250 m

Amount:

Filament diameter:

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€59.50

(coming soon)

€48.37 Excl. 23% VAT

colorFabb PLA filament on RAL colour 1.75mm, 2kg

Zoom in

Description Print any desired object with your favorite RAL colour. The colorfabb PLA filament can be ordered for any RAL colour, so that every project can be printed in the right colour.

The threshold for custom colours has never been lower. You can now order any colour you can imagine. This makes your projects more vibrant than ever.

The filament has a diameter of 1.75mm and a weight of 2kg.

During the ordering process you can indicate the correct RAL colour(s) in the 'Questions/Remarks' box.

This item is made on request at the supplier and will be delivered within 2 weeks at the latest.

Specifications

Amount:	2 kg	Material:	PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	RAL colour	Nozzle temp range:	195 - 220 °C
Download TDS:	Download	Our item no:	DFP13217
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	10.2 cm
Length:	660 m

Amount:

Filament diameter:

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€94.50

(coming soon)

€76.83 Excl. 23% VAT

colorFabb white semi-matte PLA filament 1.75mm, 0.75kg

Zoom in

Description You can create beautiful prints with this semi-matte white PLA filament from colorFabb. Printing with this filament is easy and fast. It has good hardness and is less brittle than other filaments. This filament also has a diameter of 1.75mm.

Specifications

Amount:	0.75 kg	Material:	PLA Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	semi white matte	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13201
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 70 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€39.50

€32.11 Excl. 23% VAT

EU warehouse

colorFabb black PLA semi-matte filament 1.75mm, 2.2kg

Zoom in

Description

Print a wide variety of objects with colorFabb PLA filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. With PLA filament you can print objects in any shape, where details come into their own. It is harder and shinier than ABS and does not require a heated bed. ColorFabb PLA filament is easy to print, has a diameter of 1.75mm and a weight of 2.2kg.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	235 - 255 °C
Filament diameter:	1.75 mm	Our item no:	DFP13199
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70 - 80 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€87.75

(coming soon)

€71.34 Excl. 23% VAT

colorFabb black PLA semi-matte filament 1.75mm, 0.75kg

Zoom in

Description You can create beautiful prints with the semi-matte black PLA filament from colorFabb. Printing with this filament in the colour black is easy and fast. It has good hardness and is less brittle than other filaments. This filament has a diameter of 1.75mm.

Specifications

Amount:	0.75 kg	Material:	PLA Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	semi black matte	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13106
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€39.50

€32.11 Excl. 23% VAT

EU warehouse

colorFabb pastel green Vibers PLA filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is no less than a third (!) less than with normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is pastel green and the filament is supplied on a spool of recycled cardboard to further minimise the use of plastic.

Specifications

Amount:	0.75 kg	Material:	PLA Vibers
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	pastel green	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13243
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb pastel orange Vibers PLA filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is no less than a third (!) less than with normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is pastel orange and the filament is supplied on a spool of recycled cardboard to further minimise the use of plastic.

Specifications

Amount:	0.75 kg	Material:	PLA Vibers
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	pastel orange	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13241
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb pastel purple Vibers PLA filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is no less than a third (!) less than with normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is pastel purple and the filament is supplied on a spool of recycled cardboard to further minimise the use of plastic.

Specifications

Amount:	0.75 kg	Material:	PLA Vibers
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	pastel purple	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13239
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb white PLA Vibers filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is a third less than normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is predominantly white, but is reminiscent of marl due to a slightly yellow tint. The filament is supplied on a coil of recycled cardboard to further minimise the use of plastic.

Specifications

Amount:	0.75 kg	Material:	PLA Vibers
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	white	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13215
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb transparent green PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in transparent green. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. You can create striking prints with this transparent green color. This filament has a diameter of 1.75mm.

Specifications

Amount:	0.75 kg	Material:	PLA/PHA
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	transparent green	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13108
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

€21.50

(coming soon)

€17.48 Excl. 23% VAT

colorFabb steel Steelfill filament 1.75mm, 0.75kg

Zoom in

Description Give prints a robust, metal look with Steelfill colorFabb filament. Once the object has been printed, then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 0.75kg. We recommend a print temperature of 190 to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Amount:	0.75 kg	Material:	SteelFill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	steel	Nozzle temp range:	190 - 210 °C
Filament diameter:	1.75 mm	Our item no:	DFP13161
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb steel Steelfill filament 1.75mm, 1.5kg

Zoom in

Description Give prints a robust, metal look with Steelfil colorFabb filament. Once the object has been printed then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 1.5kg. We recommend a print temperature of 190 to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Amount:	1.5 kg	Material:	SteelFill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	steel	Nozzle temp range:	190 - 210 °C
Filament diameter:	1.75 mm	Our item no:	DFP13160
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

Amount:

0.75 kg

1.5 kg

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	light grey	Our item no:	DFP13205
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	green	Our item no:	DFP13237
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	red	Our item no:	DFP13235
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

colorFabb white LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description The colorFabb LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC airplanes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and is white in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13245
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

black

dark grey

olive green

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb black LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75 mm and is black in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13247
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

Filament diameter:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb black LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13248
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Filament diameter:

1.75 mm

2.85 mm

€43.40

€35.28 Excl. 23% VAT

EU warehouse

colorFabb olive green LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut and tear. This filament has a diameter of 1.75mm and has an olive green colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13249
Colour:	olive green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb dark grey LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13251
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb vertigo blueberry night PLA filament 1.75mm, 0.75kg

Zoom in

Description colorFabb Vertigo Blueberry Night 1.75mm PLA filament is perfect for projects that you want to give a special look. The unique colour mix makes every print feel vibrant! The colour is a deep, rich blue mixed with purple and glitter. The filament is easy to print with, has a fine finish and the use of colour ensures that the layers are less clear. The glitter also gives your 3D project a special look. With Vertigo Blueberry Night filament you create a unique print with extra dimension.

Specifications

Amount:	0.75 kg	Material:	PLA
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	vertigo blueberry night	Our item no:	DFP13253
Download TDS:	download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Length:	250 m

Colour:

vertigo blueberry night

vertigo star night

€27.50

€22.36 Excl. 23% VAT

EU warehouse

colorFabb vertigo star night PLA filament 1.75mm, 0.75kg

Zoom in

Description Vertigo Star Night PLA filament from colorFabb is very suitable for projects that you want to give a special look. The unique mix of black and glitter makes it feel like you're looking at a starry sky. The filament is easy to print with, has a fine finish and the use of colour ensures that the layers are less clear. The glitter also gives your 3D project a special look. Vertigo Star Night filament gives your print that little bit extra.

Specifications

Amount:	0.75 kg	Material:	PLA
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	vertigo star night	Our item no:	DFP13255
Download TDS:	download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Length:	250 m

Colour:

vertigo blueberry night

vertigo star night

€27.50

€22.36 Excl. 23% VAT

EU warehouse

colorFabb chameleon nebula PLA filament 1.75mm, 0.75kg

Zoom in

Description The 1.75mm PLA Chameleon Nebula filament from colorFabb gives your projects a special look. The unique colour mix mimics the appearance of a colourful nebula. The colours will change from deep blues to greens as you move your print. This gives the print a different look each time. The filament is easy to print with, has a fine finish and the use of colour ensures that the layers are less clear. With Nebula Chameleon filament you add an extra colour dimension to your 3D projects.

Specifications

Amount:	0.75 kg	Material:	PLA
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	nebula	Our item no:	DFP13257
Download TDS:	download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Length:	250 m

Filament diameter:

1.75 mm

2.85 mm

Order now, we can ship this tomorrow!

€27.50

€22.36 Excl. 23% VAT

In stock

colorFabb black PLA-HP filament 1.75mm, 0.75kg

Zoom in

Description PLA-HP filament black 1.75 mm from colorFabb has both the advantages of normal PLA and additional advantages. Normal PLA is biodegradable, emits almost no odour during printing and can easily be printed at a lower temperature. PLA-HP also has a higher temperature resistance (134C HDT), so that prints of this material can be cleaned in the dishwasher. The filament does not need annealing for this resistance. The 3D prints can be used immediately after printing at higher temperatures. Ideal for prints that need to function well in warm conditions.

Specifications

Amount:	0.75 kg	Nozzle temp range:	200 - 220 °C
Brand:	colorFabb	Our item no:	DFP13266
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	5.5 cm
Material:	PLA-HP

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

colorFabb white PLA-HP filament 1.75mm, 0.75kg

Zoom in

Description PLA-HP filament white 1.75mm from colorFabb has both the advantages of normal PLA and additional advantages. Normal PLA is biodegradable, emits almost no odour during printing and can easily be printed at a lower temperature. PLA-HP also has a higher temperature resistance (134C HDT), so that prints of this material can be cleaned in the dishwasher. The filament does not need annealing for this resistance. The 3D prints can be used immediately after printing at higher temperatures. Ideal for prints that need to function well in warm conditions.

Specifications

Amount:	0.75 kg	Nozzle temp range:	200 - 220 °C
Brand:	colorFabb	Our item no:	DFP13267
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	5.5 cm
Material:	PLA-HP

Colour:

Filament diameter:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

colorFabb silver PLA-HP filament 1.75mm, 0.75kg

Zoom in

Description PLA-HP filament silver 1.75mm from colorFabb has both the advantages of normal PLA and additional advantages. Normal PLA is biodegradable, emits almost no odour during printing and can easily be printed at a lower temperature. PLA-HP also has a higher temperature resistance (134C HDT), so that prints of this material can be cleaned in the dishwasher. The filament does not need annealing for this resistance. The 3D prints can be used immediately after printing at higher temperatures. Ideal for prints that need to function well in warm conditions.

Specifications

Amount:	0.75 kg	Nozzle temp range:	200 - 220 °C
Brand:	colorFabb	Our item no:	DFP13268
Colour:	silver	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	5.5 cm
Material:	PLA-HP

Colour:

Filament diameter:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

ColorFabb traffic white High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a traffic white colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	traffic white	Our item no:	DFP16073
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb jet black High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a jet black colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	jet black	Our item no:	DFP16074
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb pearl dark grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a pearl dark grey colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	pearl dark grey	Our item no:	DFP16075
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb traffic red High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	traffic red	Our item no:	DFP16076
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb sky blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a sky blue colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	sky blue	Our item no:	DFP16077
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb natural High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a natural colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	natural	Our item no:	DFP16078
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb traffic yellow High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour traffic yellow, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	traffic yellow	Our item no:	DFP16079
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb deep orange High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour deep orange, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	deep orange	Our item no:	DFP16080
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50

(coming soon)

€23.17 Excl. 23% VAT

ColorFabb antique pink High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour antique pink, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	antique pink	Our item no:	DFP16081
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb sapphire blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour sapphire blue, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	sapphire blue	Our item no:	DFP16082
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb azure blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour azure blue, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	azure blue	Our item no:	DFP16083
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb grey blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour grey blue, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	grey blue	Our item no:	DFP16084
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb ultra navy blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour ultra navy blue, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	ultra navy blue	Our item no:	DFP16085
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb pastel blue High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour pastel blue, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	pastel blue	Our item no:	DFP16086
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb moss green High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour moss green, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	moss green	Our item no:	DFP16087
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb turquoise green High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour turquoise green, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	turquoise green	Our item no:	DFP16088
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb yellow green High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour yellow green, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	yellow/green	Our item no:	DFP16089
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb signal green High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour signal green, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	signal green	Our item no:	DFP16090
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb agate grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour agate grey, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	agate grey	Our item no:	DFP16091
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb iron grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour iron grey, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	iron grey	Our item no:	DFP16092
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb tele grey 2 High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour tele grey 2, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	telegrey	Our item no:	DFP16093
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€27.95

€22.72 Excl. 23% VAT

EU warehouse

ColorFabb light grey High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour light grey, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	light grey	Our item no:	DFP16094
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb semi-matte black High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has the colour semi-matte black, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	semi black matte	Our item no:	DFP16095
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb semi-matte white High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for high-speed printing without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, making it an excellent choice for both beginners and advanced users. The product has the colour semi-matte white, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	semi matte white	Our item no:	DFP16096
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb semi-matte black rPLA filament 1.75mm, 4kg

Zoom in

Description Print a wide variety of objects with colorFabb rPLA filament, made from recycled material, in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. With rPLA filament you can print objects in any shape, with great detail. It is harder and glossier than ABS. ColorFabb rPLA filament is easy to print, has a diameter of 1.75mm and a weight of 4kg.

Specifications

Amount:	4 kg	Material:	rPLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP16107
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 35.0 cm
Length:	3,000 m	Spool width:	10.0 cm

€132.50

€107.72 Excl. 23% VAT

EU warehouse

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

Order now, we can ship this tomorrow!

€8.50

€6.91 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

€9.75

€7.93 Excl. 23% VAT

EU warehouse

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Variant:

Nylon (30 ml)

Plus (100 ml)

Stick (80 ml)

Order now, we can ship this tomorrow!

€12.75

€10.37 Excl. 23% VAT

In stock

BIQU Panda Storage Rack for 3D filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50

(coming soon)

€51.63 Excl. 23% VAT

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Filament diameter:	1.75 mm
Manual:	Download	Our item no:	DAR01819

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm -

€5.25

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

1.75mm PLA filament

Popular products