Buy 3D printers, filament, parts & tools | lowest prices

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg

Description The black BASF PET CF15 filament (1.75mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very dimensionally stable and has a very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best result we advise you to use one.

Specifications

Amount:	0.75 kg	Material:	PET CF15
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	black	Our item no:	DFB00099
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

€78.50

€63.82 Excl. 23% VAT

EU warehouse

BASF Ultrafuse blue PET filament 1.75mm, 0.75kg

Zoom in

Description The blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	blue	Our item no:	DFB00052
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse yellow PET filament 1.75mm, 0.75kg

Zoom in

Description The yellow BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00053
Colour:	yellow	RAL colour no:	1003
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

BASF Ultrafuse green PET filament 1.75mm, 0.75kg

Zoom in

Description The green BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	green	Our item no:	DFB00055
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

1.75 mm

2.85 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

BASF Ultrafuse orange PET filament 1.75mm, 0.75kg

Zoom in

Description The orange BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	orange	Our item no:	DFB00056
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

1.75 mm

2.85 mm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€69.50 (coming soon)

€56.50 Excl. 23% VAT

BASF Ultrafuse red PET filament 1.75mm, 0.75kg

Zoom in

Description The red BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	red	Our item no:	DFB00058
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	transparent	Our item no:	DFB00059
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 2.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	2.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFB00066
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Filament print speed:	-	Outer diameter:	Ø 30.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.2 cm

Amount:

Colour:

Filament diameter:

€83.00

€67.48 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 4.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	4.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFB00069
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Filament print speed:	-	Outer diameter:	Ø 35.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.0 cm

Amount:

Colour:

€134.00

€108.94 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 8.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	8.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFB00072
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Filament print speed:	-	Outer diameter:	Ø 37.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	17.0 cm

Amount:

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€257.00 (coming soon)

€208.94 Excl. 23% VAT

BASF Ultrafuse transparent blue PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00051
Colour:	transparent blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent green PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent green BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00061
Colour:	transparent green	RAL colour no:	6018
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse white PET filament 1.75mm, 0.75kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00064
Colour:	white	RAL colour no:	9010
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Amount:

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse white PET filament 1.75mm, 2.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	2.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	white	Our item no:	DFB00067
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Filament print speed:	-	Outer diameter:	Ø 30.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.2 cm

Amount:

Colour:

Filament diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€83.00 (coming soon)

€67.48 Excl. 23% VAT

BASF Ultrafuse white PET filament 1.75mm, 4.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	4.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	white	Our item no:	DFB00070
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Filament print speed:	-	Outer diameter:	Ø 35.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.0 cm

Amount:

Colour:

Filament diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€134.00 (coming soon)

€108.94 Excl. 23% VAT

BASF Ultrafuse white PET filament 1.75mm, 8.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	8.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	white	Our item no:	DFB00073
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Filament print speed:	-	Outer diameter:	Ø 37.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	17.0 cm

Amount:

Colour:

Filament diameter:

€257.00

€208.94 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black PET filament 1.75mm, 0.75kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00065
Colour:	black	RAL colour no:	9005
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Amount:

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black PET filament 1.75mm, 2.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	2.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	black	Our item no:	DFB00068
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Filament print speed:	-	Outer diameter:	Ø 30.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.2 cm

Amount:

Colour:

Filament diameter:

€83.00

€67.48 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black PET filament 1.75mm, 4.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	4.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	black	Our item no:	DFB00071
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Filament print speed:	-	Outer diameter:	Ø 35.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.0 cm

Amount:

Colour:

Filament diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€134.00 (coming soon)

€108.94 Excl. 23% VAT

BASF Ultrafuse black PET filament 1.75mm, 8.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	8.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	black	Our item no:	DFB00074
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Filament print speed:	-	Outer diameter:	Ø 37.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	17.0 cm

Amount:

Colour:

Filament diameter:

€257.00

€208.94 Excl. 23% VAT

EU warehouse

BASF Ultrafuse blue rPET filament 1.75mm, 0.75kg

Zoom in

Description Ultrafuse rPET filament from BSAF is made from recycled materials and is therefore very durable. The filament is just as strong as new filament and has good chemical resistance. The print temperature is between 225°C and 245°C. This blue filament has a diameter of 1.75mm.

Specifications

Amount:	0.75 kg	Material:	rPET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	blue	Our item no:	DFB00200
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

€43.50

€35.37 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

1.75mm PETG filament

Popular products