Green

1.75mm Green PLA Filament

View other colours:

View 2.85mm Green PLA Filament here

73 - 96 of 106

Bedrock 3D green PLA filament 1.75mm, 0.75kg

Zoom in

Description Bedrock 3D green PLA filament is a high-quality filament with a smooth, opaque green colour. Ideal for decorative objects, prototypes, and visually recognisable parts.

Key Features:

Easy to print, even on open printers
Beautiful, even surface with a bright green tint
Suitable for almost all FDM 3D printers

Specifications

Amount:	0.75 kg	Nozzle temp range:	210 - 220 °C
Brand:	Bedrock 3D	Our item no:	DFB00241
Colour:	green	RAL colour no:	6018
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 60 °C	Spool width:	5.2 cm
Material:	PLA

Colour:

€28.95

€23.54 Excl. 23% VAT

EU warehouse

colorFabb green LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13191
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb olive green LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut and tear. This filament has a diameter of 1.75mm and has an olive green colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13249
Colour:	olive green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb pastel green Vibers PLA filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is no less than a third (!) less than with normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is pastel green and the filament is supplied on a spool of recycled cardboard to further minimise the use of plastic.

Specifications

Amount:	0.75 kg	Material:	PLA Vibers
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	pastel green	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13243
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	green	Our item no:	DFP13237
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

123-3D fluorescent green PLA filament 1.75mm, 1.1kg

Zoom in

Description Our fluorescent green 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01055
Colour:	green	Roundness:	>95%
Download TDS:	Download	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Fluorescent	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€19.60 (coming soon)

€15.93 Excl. 23% VAT

REAL camouflage green PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description The camouflage green PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	205 - 225 °C
Colour:	green	Our item no:	DFP02150
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	4.5 cm

Amount:

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50 (coming soon)

€21.54 Excl. 23% VAT

Polymaker PolyLite green Silk PLA filament 1.75mm, 1kg

Zoom in

Description Print your designs with a glossy effect with the green PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. As a result, the separate print layers on the side surfaces are less visible, resulting in a smooth surface.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14327
Colour:	green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA

€32.50 (coming soon)

€26.42 Excl. 23% VAT

Polymaker PolyLite Caribbean sea blue-green Dual Silk PLA filament 1.75mm, 1kg

Zoom in

Description The Caribbean Sea Blue-Green PolyLite Dual Silk PLA from Polymaker has an amazing, two-tone, silky gloss effect. The colour of your print seems to change from Sea Blue to Green when viewed from a different angle. In addition, this filament is very easy to use and environmentally friendly. Perfect for creating decorative prints.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14339
Colour:	caribbean sea blue green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm

€37.50 (coming soon)

€30.49 Excl. 23% VAT

Polymaker PolyTerra forest green PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Forest Green' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14150
Colour:	forest green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA

Colour:

Filament diameter:

€21.50 (coming soon)

€17.48 Excl. 23% VAT

Polymaker PolyTerra army dark green PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'army dark green' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14231
Colour:	army dark green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon)

€17.48 Excl. 23% VAT

Polymaker PolyTerra arctic teal PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Arctic Teal' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14164
Colour:	arctic teal	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA

Amount:

Colour:

Filament diameter:

€21.50 (coming soon)

€17.48 Excl. 23% VAT

Polymaker PolyLite turquoise PLA filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear turquoise colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230°C. We recommend a temperature between 25 and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14078
Colour:	turquoise	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	40-60 mm/s	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA

Colour:

Filament diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon)

€26.42 Excl. 23% VAT

Polymaker PolyLite jadeite green-chrome Dual Silk PLA filament 1.75mm, 1kg

Zoom in

Description The Jadeite Green-Chrome PolyLite Dual Silk PLA from Polymaker has an amazing, two-tone, silky gloss effect. The colour of your print seems to change from Green to Chrome when you view it from a different angle. In addition, this filament is very easy to use and environmentally friendly. Perfect for making decorative prints.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14340
Colour:	jadeite green chrome	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA	Spool width:	6.8 cm

€37.50 (coming soon)

€30.49 Excl. 23% VAT

Polymaker PolyTerra green PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimized for better layer adhesion. The PolyTerra filament in the colour 'green' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14247
Colour:	green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA+

€25.50 (coming soon)

€20.73 Excl. 23% VAT

Polymaker army green HT-PLA-GF filament 1.75mm, 1kg

Zoom in

Description Polymaker HT PLA GF Army Green is a glass-fibre-reinforced HT PLA filament in a robust dark green shade, designed for applications requiring both heat and structural stability. It combines the ease of printing of PLA with improved material properties: high stiffness, minimal shrinkage, and excellent dimensional stability. Thanks to the glass-fibre reinforcement, the filament is resistant to deformation at elevated temperatures, making it ideal for technical components with a camouflage or military look.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16185
Colour:	army green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€33.50 (coming soon)

€27.24 Excl. 23% VAT

Dremel green PLA filament 1.75mm, 0.75kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this green PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Amount:	0.75 kg	Nozzle temp range:	200 - 240 °C
Brand:	Dremel	Our item no:	DCP00184
Colour:	green	Inner diameter:	Ø 1.9 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 18.0 cm
Heated bed temp:	0 - 60 °C	Spool width:	5.4 cm
Material:	PLA

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€41.50 (coming soon)

€33.74 Excl. 23% VAT

BASF Ultrafuse army green PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is army green in colour and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	0.75 kg	Nozzle temp range:	210 - 220 °C
Brand:	BASF	Our item no:	DFB00111
Colour:	army green	RAL colour no:	6003
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 60 °C	Spool width:	5.2 cm
Material:	PLA

Colour:

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

colorFabb mint turquoise PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with the colorFabb PLA/PHA filament in the colour mint turquoise. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and is less brittle than other filaments. The intense turquoise colour allows you to create prints that are reminiscent of the ocean. This filament has a diameter of 1.75mm.

Specifications

Amount:	0.75 kg	Material:	PLA/PHA
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	mint turquoise	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13128
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€21.50 (coming soon)

€17.48 Excl. 23% VAT

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

Order now, we can ship this on Monday!

€8.50

€6.91 Excl. 23% VAT

In stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Brand:	123-3D	Weight:	0.325 kg
Our item no:	DFR00005

Order now, we can ship this on Monday!

€15.95

€12.97 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Variant:

Nylon (30 ml)

Plus (100 ml)

Stick (80 ml)

Order now, we can ship this on Monday!

€12.75

€10.37 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications