Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

1.75mm PLA filament

View 2.85mm PLA Filament

1 - 24 of 91

Sort

colorFabb bronze Bronzefill filament 1.75mm, 0.75kg

colorFabb bronze Bronzefill filament 1.75mm, 0.75kg DFP13149

Description This special bronze PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Bronzefill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 0.75kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Bronzefill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	bronze	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13149
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb bronze Bronzefill filament 1.75mm, 1.5kg

colorFabb bronze Bronzefill filament 1.75mm, 1.5kg DFP13148

Description This special bronze PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Bronzefill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 1.5kg. The recommended print temperature is 195°C to 220°C and the print speed is 40mm/s to 100mm/s.

Specifications

Amount:	1.5 kg	Material:	Bronzefill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	bronze	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13148
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb copper Copperfill filament 1.75mm, 0.75kg

colorFabb copper Copperfill filament 1.75mm, 0.75kg DFP13153

Description This special copper PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Copperfill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 0.75kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Copperfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	copper	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13153
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb copper Copperfill filament 1.75mm, 1.5kg

colorFabb copper Copperfill filament 1.75mm, 1.5kg DFP13152

Description This special copper PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Copperfill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 1.5kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	1.5 kg	Material:	Copperfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	copper	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13152
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb cork Corkfill filament 1.75mm, 0.65kg

colorFabb cork Corkfill filament 1.75mm, 0.65kg DFP13156

Description Give prints a special look with colorFabb cork filament. Corkfill is combined with PLA/PHA, but is much lighter than standard PLA. The filament has a dark brown colour and is a perfect addition to your current collection. This filament has a diameter of 1.75mm and weighs 0.65kg. The recommended print temperature is 210 to 230°C and the print speed is 40 to 60mm/s.

Specifications

Amount:	0.65 kg	Material:	Corkfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	cork	Nozzle temp range:	210 - 230 °C
Filament diameter:	1.75 mm	Our item no:	DFP13156
Filament print speed:	40-60 mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€42.50

€34.55 Excl. 23% VAT

EU warehouse

colorFabb wood Woodfill filament 1.75mm, 0.6kg

colorFabb wood Woodfill filament 1.75mm, 0.6kg DFP13164

Description Woodfill colorFabb filament consists of PLA/PHA and recycled wood fibres. You can create beautiful wooden objects with a light brown colour in no time at all. This filament has a diameter of 1.75mm and a weight of 0.6kg. We recommend a print temperature of 195 to 220°C and a print speed of 40 to 100mm/s. Because this filament is based on PLA, it is very easy to print with (without a heated bed), with a nozzle of 0.5mm or larger.

Specifications

Amount:	0.6 kg	Material:	Wood fill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	wood	Nozzle temp range:	190 - 210 °C
Filament diameter:	1.75 mm	Our item no:	DFP13164
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

colorFabb glow in the dark-green Glowfill filament 1.75mm, 0.75kg

colorFabb glow in the dark-green Glowfill filament 1.75mm, 0.75kg DFP13158

Description Bring light into the darkness with the green colorFabb glow-in-the-dark filament. Glowfill has a beautiful, creamy white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 1.75mm. We recommend a print temperature of 195 to 220°C and a print speed of 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Glowfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	green glow in the dark	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13158
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg DFP13020

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	grey/silver	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13020
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb natural LW-PLA filament 1.75mm, 0.75kg

colorFabb natural LW-PLA filament 1.75mm, 0.75kg DFP13022

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour natural has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13022
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb red LW-PLA filament 1.75mm, 0.75kg

colorFabb red LW-PLA filament 1.75mm, 0.75kg DFP13024

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour red has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13024
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb black LW-PLA filament 1.75mm, 0.75kg

colorFabb black LW-PLA filament 1.75mm, 0.75kg DFP13018

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13018
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg DFP13193

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	yellow	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13193
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb green LW-PLA filament 1.75mm, 0.75kg

colorFabb green LW-PLA filament 1.75mm, 0.75kg DFP13191

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13191
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb dark blue PLA economy filament 1.75mm, 2.2kg

colorFabb dark blue PLA economy filament 1.75mm, 2.2kg DFP13096

Description This colorFabb filament in the colour dark blue has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	dark blue	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13096
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Order now, we can ship this tomorrow!

€43.50

€35.37 Excl. 23% VAT

In stock

colorFabb light grey PLA Economy filament 1.75mm, 2.2kg

colorFabb light grey PLA Economy filament 1.75mm, 2.2kg DFP13098

Description This light grey colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	light grey	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13098
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

€43.50

€35.37 Excl. 23% VAT

EU warehouse

colorFabb red PLA Economy filament 1.75mm, 2.2kg

colorFabb red PLA Economy filament 1.75mm, 2.2kg DFP13100

Description This red colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13100
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€43.50 (coming soon)

€35.37 Excl. 23% VAT

colorFabb white PLA Economy filament 1.75mm, 2.2kg

colorFabb white PLA Economy filament 1.75mm, 2.2kg DFP13104

Description This white colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	white	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13104
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Order now, we can ship this tomorrow!

€43.50

€35.37 Excl. 23% VAT

In stock

colorFabb silver PLA economy filament 1.75mm, 2.2kg

colorFabb silver PLA economy filament 1.75mm, 2.2kg DFP13102

Description This silver-coloured colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	silver	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13102
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Order now, we can ship this tomorrow!

€43.50

€35.37 Excl. 23% VAT

In stock

colorFabb black PLA economy filament 1.75mm, 2.2kg

colorFabb black PLA economy filament 1.75mm, 2.2kg DFP13094

Description This colorFabb filament in the colour black has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13094
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

€43.50

€35.37 Excl. 23% VAT

EU warehouse

colorFabb PLA filament on RAL colour 1.75mm, 0.75kg

colorFabb PLA filament on RAL colour 1.75mm, 0.75kg DFP13225

Description Print any desired object with your favorite RAL colour. The colorfabb PLA filament can be ordered for any RAL colour, so that every project can be printed in the right colour.

The threshold for custom colours has never been lower. You can now order any colour you can imagine. This makes your projects more vibrant than ever.

The filament has a diameter of 1.75mm and a weight of 0.75kg.

During the ordering process you can indicate the correct RAL colour(s) in the 'Questions/Remarks' box.

This item is made on request at the supplier and will be delivered within 2 weeks at the latest.

Specifications

Amount:	0.75 kg	Material:	PLA
Brand:	colorFabb	Max deviation:	± 0.05
Colour:	RAL colour	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13225
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€59.50 (coming soon)

€48.37 Excl. 23% VAT

colorFabb PLA filament on RAL colour 1.75mm, 2kg

colorFabb PLA filament on RAL colour 1.75mm, 2kg DFP13217

Description Print any desired object with your favorite RAL colour. The colorfabb PLA filament can be ordered for any RAL colour, so that every project can be printed in the right colour.

The threshold for custom colours has never been lower. You can now order any colour you can imagine. This makes your projects more vibrant than ever.

The filament has a diameter of 1.75mm and a weight of 2kg.

During the ordering process you can indicate the correct RAL colour(s) in the 'Questions/Remarks' box.

This item is made on request at the supplier and will be delivered within 2 weeks at the latest.

Specifications

Amount:	2 kg	Material:	PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	RAL colour	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13217
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	660 m	Spool width:	10.2 cm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€94.50 (coming soon)

€76.83 Excl. 23% VAT

colorFabb white semi-matte PLA filament 1.75mm, 0.75kg

colorFabb white semi-matte PLA filament 1.75mm, 0.75kg DFP13201

Description You can create beautiful prints with this semi-matte white PLA filament from colorFabb. Printing with this filament is easy and fast. It has good hardness and is less brittle than other filaments. This filament also has a diameter of 1.75mm.

Specifications

Amount:	0.75 kg	Material:	PLA Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	semi white matte	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13201
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60 - 70 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€39.50

€32.11 Excl. 23% VAT

EU warehouse

colorFabb white semi-matte PLA filament 1.75mm, 2.2kg

colorFabb white semi-matte PLA filament 1.75mm, 2.2kg DFP13203

Description You can create beautiful prints with this semi-matte white PLA filament from colorFabb. Printing with this filament is easy and fast. It has good hardness and is less brittle than other filaments. This filament also has a diameter of 1.75mm.

Specifications

Amount:	2.2 kg	Material:	PLA Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	semi white matte	Nozzle temp range:	235 - 255 °C
Filament diameter:	1.75 mm	Our item no:	DFP13203
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70 - 80 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb black PLA semi-matte filament 1.75mm, 2.2kg

colorFabb black PLA semi-matte filament 1.75mm, 2.2kg DFP13199

Description

Print a wide variety of objects with colorFabb PLA filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. With PLA filament you can print objects in any shape, where details come into their own. It is harder and shinier than ABS and does not require a heated bed. ColorFabb PLA filament is easy to print, has a diameter of 1.75mm and a weight of 2.2kg.

Read more about printing with PLA filament here.

Specifications

Amount:	2.2 kg	Material:	PLA Semi-mat
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	235 - 255 °C
Filament diameter:	1.75 mm	Our item no:	DFP13199
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70 - 80 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€87.75 (coming soon)

€71.34 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

© 2025 - 123-3d.ie