1.75mm PA filament

Sort

colorFabb matte black PA-CF low warp filament 1.75mm, 0.7kg

Description The matte black colorFabb PA-CF Low Warp filament (1.75mm) is professional and very strong. The most important properties are the high tensile strength, great heat resistance and many carbon fibres that are contained in this filament. With the colorFabb PA-CF Low Warp filament you have almost no problems with warping (distortion) and you can also print large 3D prints with confidence.

The ideal printing temperature for this nylon filament is 260°C to 280°C. For best results, set the heated bed to 50°C.

Specifications

Amount:	0.7 kg	Material:	PA-CF
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	matte black	Nozzle temp range:	260 - 280 °C
Filament diameter:	1.75 mm	Our item no:	DFP13068
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb black PA NEAT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb PA NEAT filament is colorFabb's new, heat resistant filament made of polyamide (nylon). Even with a temperature of 120°C, a print of this filament can function well. This makes it a perfect material for making professional prints that last longer. PA has excellent mechanical and chemical properties. It is also distinguished by its very low water absorption. With PA NEAT you have a strong filament that does not deform: ideal for functional prints.

Nylon filaments absorb moisture and must be dried thoroughly before printing. This filament has a drying advice of 4 to 6 hours at a temperature of 70 to 80 degrees.

Specifications

Amount:	0.75 kg	Nozzle temp range:	265 - 290 °C
Brand:	colorFabb	Our item no:	DFP13261
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	5.5 cm
Material:	PA NEAT