Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

colorFabb yellow LW-PLA filament 2.85mm, 0.75kg

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	yellow	Nozzle temp range:	240 - 260 °C
Filament diameter:	2.85 mm	Our item no:	DFP13194
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

Order now, we can ship this today!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb grey-silver LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	grey/silver	Nozzle temp range:	240 - 260 °C
Filament diameter:	2.85 mm	Our item no:	DFP13021
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb green LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	240 - 260 °C
Filament diameter:	2.85 mm	Our item no:	DFP13192
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb natural LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour natural has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	2.85 mm	Our item no:	DFP13023
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb red LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour red has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	240 - 260 °C
Filament diameter:	2.85 mm	Our item no:	DFP13025
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon)

€28.05 Excl. 23% VAT

colorFabb black LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour black has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	2.85 mm	Our item no:	DFP13019
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

Order now, we can ship this today!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb dark grey LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and has a dark grey colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13252
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

€45.50

€36.99 Excl. 23% VAT

EU warehouse

colorFabb white LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and is white in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13246
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€44.50 (coming soon)

€36.18 Excl. 23% VAT

colorFabb black LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and is black in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13248
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

€43.40

€35.28 Excl. 23% VAT

EU warehouse

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this today!

€12.75

€10.37 Excl. 23% VAT

In stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this today!

€7.75

€6.30 Excl. 23% VAT

In stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this today!

€7.25

€5.89 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25

€14.84 Excl. 23% VAT

In stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

2.85mm LW-PLA

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

2.85mm LW-PLA