REAL glow in the dark PLA filament 2.85mm, 0.5kg

Filament diameter: 2.85 mm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

Description Specifications

Description

With this Real glow in the dark PLA filament (2.85mm) you can create 3D objects that emit green light in the dark. This makes projects with fun light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Please note: Glow in the dark filament has an abrasive effect in the nozzle, causing it to wear out faster. It is therefore recommended to replace the nozzle more often and/or to opt for a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	190 - 215 °C
Brand:	REAL	Our item no:	DFP02240
Colour:	green	Roundness:	>95%
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 55 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Glow in the dark	Spool width:	7.0 cm
Max deviation:	+mn ± 0.10 mm

123-3D glow-in-the-dark green PLA filament 2.85mm, 1.1kg

€24.50

€19.92 Excl. 23% VAT

In stock

Order now, we can ship this on Monday!

Description Specifications Recommendations

Description

Our green glow-in-the-dark 2.85mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01057
Colour:	green	Roundness:	>95%
Download TDS:	Download	Spool empty weight:	± 216 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55 - 75 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Glow in the dark	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm