Buy PETG filament | All types & colours

* Replaced by DFP02211 * REAL red PETG filament 1.75mm, 3kg

Description The red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	3 kg	Nozzle temp range:	220 - 250 °C
Brand:	REAL	Our item no:	DFE02050
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.1 cm
Length:	1,020 m	Outer diameter:	Ø 30.0 cm
Material:	PETG	Spool width:	10.5 cm
Max deviation:	+mn ± 0.05 mm

Amount:

Colour:

€87.50

€71.14 Excl. 23% VAT

EU warehouse

eSun black PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's black filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20208
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Spectrum deep black PET-G Matte filament 1.75mm, 1kg

Zoom in

1
0

Description Go for 3D prints with a matte look with the PET-G Matte filament from Spectrum. Thanks to this look, the layer lines are less visible. In addition, this filament is easy to print, shrinks little and has good adhesion between layers. This filament also remains well attached to the build plate during printing. Finally, it has improved temperature resistance, impact resistance and is less brittle. This is a 1.75mm deep black filament on a 1kg spool.

Specifications

Amount:	1 kg	Material:	PETG Matt
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	black	Our item no:	DFS10112
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	60 - 80 °C

Colour:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Flashforge black HS PETG filament 1.75mm, 1kg

Zoom in

Description Flashforge HS PETG filament is ideal for creating strong 3D prints with high impact resistance. It is easy to print and specially designed to be printed at high speed, without compromising on quality. The filament is black, is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	HS PETG
Brand:	Flashforge	Nozzle temp range:	220 - 270 °C
Colour:	black	Our item no:	DFP16061
Download SDS:	Download	Inner diameter:	Ø 5.2 cm
Download TDS:	Download	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	70 - 80 °C

Colour:

black

white

€19.50

€15.85 Excl. 23% VAT

EU warehouse

eSun white PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's white filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20216
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

Variant:

Re-fill

Spool

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Polymaker PolyLite red PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright red colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14206
Colour:	red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

Filament diameter:

1.75 mm

2.85 mm

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite blue PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright blue colour. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14196
Colour:	blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

Filament diameter:

1.75 mm

2.85 mm

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite green PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright green colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14198
Colour:	green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent blue appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14295
Colour:	transparent blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite orange PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright orange colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14202
Colour:	orange	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

Filament diameter:

1.75 mm

2.85 mm

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent red PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent red appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14291
Colour:	transparent red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite dark green PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a dark green colour. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14292
Colour:	dark green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent green PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent green appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage rate, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14293
Colour:	transparent green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite silver PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a beautiful silver colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage rate, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14297
Colour:	silver	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite gold PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a golden colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14296
Colour:	gold	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Spectrum polar white PET-G Matte filament 1.75mm, 1kg

Zoom in

1
0

Description Go for 3D prints with a matte look with the PET-G Matte filament from Spectrum. Thanks to this look, the layer lines are less visible. In addition, this filament is easy to print, shrinks little and has good adhesion between layers. This filament also remains well attached to the build plate during printing. Finally, it has improved temperature resistance, impact resistance and is less brittle. This is a 1.75mm polar white filament on a 1kg spool.

Specifications

Amount:	1 kg	Material:	PETG Matt
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	white	Our item no:	DFS10114
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	60 - 80 °C

Colour:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Flashforge white HS PETG filament 1.75mm, 1kg

Zoom in

Description Flashforge HS PETG filament is ideal for making strong 3D prints with high impact resistance. It is easy to print and specially designed to be printed at high speed, without compromising on quality. The filament is white, 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	HS PETG
Brand:	Flashforge	Nozzle temp range:	220 - 270 °C
Colour:	white	Our item no:	DFP16062
Download SDS:	Download	Inner diameter:	Ø 5.2 cm
Download TDS:	Download	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Spool width:	6.8 cm
Heated bed temp:	70 - 80 °C

Colour:

black

white

€19.50

€15.85 Excl. 23% VAT

EU warehouse

eSun grey PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20210
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

Variant:

Re-fill

Spool

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun transparent blue PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent blue filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20209
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Re-fill

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun solid green PETG filament 1.75mm, 1kg

Zoom in

Description The solid green PETG filament from eSun is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE00068
Colour:	green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Variant:

Re-fill

Spool

€32.50

€26.42 Excl. 23% VAT

EU warehouse

eSun transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent blue PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20046
Colour:	transparent blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun transparent green PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent green PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20047
Colour:	transparent green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent orange PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20050
Colour:	transparent orange	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Spectrum arctic white Premium PET-G filament 1.75mm, 1kg

Zoom in

1
0

Description The Spectrum Premium PET-G filament has almost no shrinkage and absorbs little moisture. This filament combines the advantages of PLA and ABS, making it easy to print and has good adhesion between layers. 3D prints made with a transparent version of this filament can even achieve an almost transparent effect. The good mechanical properties and good resistance to chemicals ensure that this filament can be used for many different types of 3D prints. This is a 1.75mm Arctic white filament on a 1kg spool.

Specifications

Amount:	1 kg	Material:	PETG Premium
Brand:	Spectrum	Nozzle temp range:	230 - 255 °C
Colour:	arctic white	Our item no:	DFS10096
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	60 - 80 °C