Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

Creality 3D CR X Pro extruder kit

Zoom in

Description Original extruder (left) for the Creality CR-X Pro 3D printer.

Specifications

Brand:

Creality 3D

Our item no:

DAR00581

€37.50 (Incl. 23% VAT) (€30.49 Excl. 23% VAT)

EU warehouse

Creality 3D CR-200B motherboard

Zoom in

Description This Creality 3D CR-200B motherboard is to replace the original motherboard. It is compatible with Creality 3D CR-200B printers.

Specifications

Brand:	Creality 3D	Our item no:	DAR00583
Dimensions:	45 x 155 x 115 mm	Weight:	0.71 kg

€76.50 (Incl. 23% VAT) (€62.20 Excl. 23% VAT)

EU warehouse

Creality 3D CR-200B Filament detection kit

Zoom in

Description This Creality filament sensor kit is suitable for the following models of Creality printers: CR-200B, CR-30 (PrintMill), CR-6 SE, CR-10 Smart, CR-10 Smart Pro, CR-6 Max and the Ender- 7. When the filament runs out, a red LED lights up on the sensor. As soon as the sensor detects filament again, the LED lights up blue.

Specifications

Brand:

Creality 3D

Our item no:

DAR00584

€15.50 (Incl. 23% VAT) (€12.60 Excl. 23% VAT)

EU warehouse

Creality 3D CR-200B heat bed

Zoom in

Description Original replacement heated bed for the Creality CR-200B 3D printer.

Specifications

Brand:

Creality 3D

Our item no:

DAR00587

€25.50 (Incl. 23% VAT) (€20.73 Excl. 23% VAT)

EU warehouse

Creality 3D CR-200B limit switch module

Zoom in

Description Original end stop for Creality CR-200B 3D printer.

Specifications

Brand:

Creality 3D

Our item no:

DAR00589

€6.50 (Incl. 23% VAT) (€5.28 Excl. 23% VAT)

EU warehouse

Creality 3D Ender-3 Max belt X-axis

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the X axis of the Creality 3D Ender-3 Max printer.

Specifications

Belt size:	6 mm	Our item no:	DAR00608
Brand:	Creality 3D	Tooth pitch:	2 mm

€6.75 (Incl. 23% VAT) (€5.49 Excl. 23% VAT)

EU warehouse

Creality 3D CR-200B thermistor extension cable

Zoom in

Description Original connection / extension cable for the Creality CR-200B 3D printer.

Specifications

Brand:

Creality 3D

Our item no:

DAR00781

€6.50 (Incl. 23% VAT) (€5.28 Excl. 23% VAT)

EU warehouse

Creality 3D Halot One CL-60 mainboard

Zoom in

Description Original Creality 3D Halot One CL-60 motherboard. This motherboard is easy to install and contains a powerful STM32 microprocessor.

Specifications

Brand:

Creality 3D

Our item no:

DAR00782

€121.50 (Incl. 23% VAT) (€98.78 Excl. 23% VAT)

EU warehouse

Creality 3D Pad mini 4.3" touchscreen

Zoom in

Description The Creality 3D pad mini allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. Combine the Pad mini with the 3D Digital Spool-C for real-time monitoring of filament weight. This way you can immediately see whether there is still enough filament available for your 3D print.

The 4.3 inch HD screen has a resolution of 480 x 272 pixels. On the side you will find a USB connection, so that the 3D printer can read Gcode files directly. The intelligent interface allows for a lot of personalisation, such as setting your own screensaver. The interface is also available in 11 languages.

The Creality 3D Pad mini is compatible with the following printers with a 32-bit mainboard:
Ender-3, Ender-3 Pro and the Ender-3 v2.

Specifications

Brand:	Creality 3D	Our item no:	DAR00817
Colour:	black	Voltage:	5 v
Dimensions:	21.2 x 124 x 108.2 mm	Weight:	0.27 kg

€51.50 (Incl. 23% VAT) (€41.87 Excl. 23% VAT)

EU warehouse

Creality 3D water cooling kit

Zoom in

Description This water cooling kit is compatible with the Ender-3 S1/Ender-3 S1 PRO/CR-10 Smart PRO and other FDM printers equipped with Sprite Extruder Pro.

Specifications

Brand:	Creality 3D	Voltage:	12 v
Current rating:	0.3 A	Volume:	125 ml
Dimensions:	63.2 x 191.2 x 63.2 mm	Weight:	0.9 kg
Our item no:	DAR00819

€93.00 (Incl. 23% VAT) (€75.61 Excl. 23% VAT)

EU warehouse

Creality 3D Sprite extruder pro kit, 300℃ high temperature

Zoom in

Description This Creality 3D Sprite extruder pro kit can be used to replace the original extruder pro kit if it is damaged or old. It is compatible with Creality 3D Sprite printers.

Specifications

Brand:	Creality 3D	Dimensions:	64.3 x 54 x 50 mm
Current rating:	0.8 A	Nozzle temp range:	0 - 300 °C
Filament diameter:	1.75 mm	Our item no:	DAR00820

Order now, we can ship this today!

€102.00 (Incl. 23% VAT) (€82.93 Excl. 23% VAT)

In stock

Creality 3D Sprite Extruder 260℃ High Temperature for Ender-3 S1

Zoom in

Description Use the Sprite Extruder 260°C High Temperature from Creality 3D for your Ender-3 S1 printer. The part weighs 266g and has a small size of 54mm x 50mm x 64.3mm. More stable printing is possible thanks to the dual gear system. The part can easily switch between air-cooled and water-cooled heat dissipation. This Creality 3D extruder is suitable for various filaments such as PLA, TPU, PETG and ABS.

This kit is suitable for the Creality 3D Ender-3 S1 printers.

Specifications

Brand:	Creality 3D	Extruder max temp:	260 °C
Filament diameter:	1.75 mm	Our item no:	DAR00821
Dimensions:	54 x 64.5 x 50 mm	Weight:	0.266 kg

€71.00 (Incl. 23% VAT) (€57.72 Excl. 23% VAT)

EU warehouse

Creality 3D Sprite Extruder Pro 300℃ High Temperature | All Metal Design

Zoom in

Description Use the Sprite Extruder Pro 300°C High Temperature | All Metal Design from Creality 3D for your 3D printer. The part weighs 288g and has a small size of 54mm x 50mm x 64.3mm. More stable printing is possible thanks to the dual gear system. The extruder makes it possible to print materials at high temperatures of up to 300°C. The part can easily switch between air-cooled and water-cooled heat dissipation. This Creality 3D extruder is suitable for various filaments such as PLA, TPU, PETG and ABS.

This upgrade is suitable for the Ender-3 S1 and the CR-10 Smart Pro printers from Creality 3D.

Specifications

Brand:	Creality 3D	Extruder max temp:	300 °C
Filament diameter:	1.75 mm	Our item no:	DAR00822
Dimensions:	54 x 64.3 x 50 mm	Weight:	0.288 kg

€83.00 (Incl. 23% VAT) (€67.48 Excl. 23% VAT)

EU warehouse

Creality 3D resin tool kit

Zoom in

Description The Resin Tool Kit from Creality 3D is the ideal addition to your resin printer. By using this set you are able to spray the resin neatly and cleanly after printing. The kit contains the following products:

Silicone mat to keep your worktop clean.
Stainless steel funnel with filter and a silicone funnel for the reuse of resin.
Plastic brush to clean the used items.
PVC gloves.
Plastic scraper to remove printed objects.

Specifications

Brand:	Creality 3D	Weight:	0.41 kg
Our item no:	DAR00824

€19.75 (Incl. 23% VAT) (€16.06 Excl. 23% VAT)

EU warehouse

Creality 3D Dual lead screw upgrade kit

Zoom in

Description With this upgrade kit for the Creality Ender-3 series printers, you can quickly and easily give the printer an extra Z-axis to achieve even better print precision. This upgrade kit contains all necessary parts to connect and mount the kit.

Compatible with the following Creality Printers: Ender-3, Ender-3 Pro, Ender-3 v2, Ender-3 Neo and the Ender-3 v2 Neo.

Specifications

Brand:	Creality 3D	Weight:	0.83 kg
Our item no:	DAR00825

Order now, we can ship this today!

€31.50 (Incl. 23% VAT) (€25.61 Excl. 23% VAT)

In stock

Creality 3D Halot Sky CL 89 FEP film, 200mm x 140mm x 0.15mm

Zoom in

Description This package contains 1 FEP film sheet for the Creality 3D Halot Sky CL 89 3D printer.

Specifications

Brand:	Creality 3D	Our item no:	DAR00840
Dimensions:	0.15 x 266 x 190 mm

Order now, we can ship this today!

€17.00 (Incl. 23% VAT) (€13.82 Excl. 23% VAT)

In stock

Creality 3D Halot Sky CL-89 print screen

Zoom in

Description This Creality 3D Halot Sky CL-89 print screen is a replacement for the original screen. It is compatible with Creality 3D Halot Sky CL-89 printers.

Specifications

Brand:

Creality 3D

Our item no:

DAR00842

€256.00 (Incl. 23% VAT) (€208.13 Excl. 23% VAT)

EU warehouse

Creality 3D Halot Sky CL 89 Printing Platform Kit

Zoom in

Description The Halot Sky CL 89 is a printing platform kit from Creality 3D. Use the touch screen kit for your Creality printer.

Specifications

Brand:	Creality 3D	Our item no:	DAR00843
Dimensions:	123 x 195 x 9.98 mm

€41.50 (Incl. 23% VAT) (€33.74 Excl. 23% VAT)

EU warehouse

Creality 3D Halot Sky CL 89 Touch Screen Kit

Zoom in

Description Original Creality 3D spare LCD touch screen for the CL-89 Halot Sky and Halot Sky 2022. The screen is 5” in size.

Specifications

Brand:

Creality 3D

Our item no:

DAR00845

€70.50 (Incl. 23% VAT) (€57.32 Excl. 23% VAT)

EU warehouse

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Brand:	Creality 3D	Our item no:	DAR00885
Colour:	black	Voltage:	12 v
Standard WiFi connection:	802.11 b/g/n	Weight:	0.46 kg
Dimensions:	40 x 222 x 128 mm

Order now, we can ship this today!

€180.00 Creality3D rrp

€159.50 (€129.67 Excl. 23% VAT)

You save €20.50

In stock

Creality 3D CR-Scan Lizard Luxury version 3D Scanner

Zoom in

Description With the CR-Scan Lizard 3D Scanner you can capture a complete and accurate image of objects in a short time. The scanner can be used both handheld and on a tripod (in combination with the turntable), so that large (500mm to 1500mm) and small objects (15mm to 300mm) can be scanned. Combine the two methods to scan medium-sized objects (300mm to 500mm).

This scanner scans quickly (10 FPS) in real-time without the use of markers or colours. This means not only that you don't need any tools for a scan, but also that you can scan in well-lit areas, and that even completely black objects can be scanned precisely. The minimum scan size is 15mm, and the 3D point distance is 0.1mm to 0.2mm with a precision of up to 0.05mm. This allows you to scan even objects with small marks and parts correctly.

The CR-Scan Lizard 3D Scanner is compatible with Windows 10 64-bit and with MacOS. This way you can be sure that you can use the scanner with your favorite software. If you read in the scan via CR Studio, it can be automatically synchronized with the Creality Cloud, so that you can slice and print immediately. And do you also want to be able to map colours automatically? Then use the Colour Kit, effective up to a scan size of 300mm.

Package content :

CR Scan Lizard 3D Scanner
Turntable
Tripod
Cables
Storage bag
Color kit

Specifications

Brand:	Creality 3D	Scan resolution:	0.05mm
Colour:	white	Max scan volume:	1500mmx1500mmx1500mm
Dimensions:	46 x 84 x 155 mm	Min scan volume:	15mm x 15mm x 15mm
Our item no:	DAR00925	Weight:	0.37 kg

Order now, we can ship this today!

€599.00 (Incl. 23% VAT) (€486.99 Excl. 23% VAT)

In stock

Creality 3D CR Touch Auto levelling kit (without bracket)

Zoom in

Description The Creality 3D CR Touch Auto levelling kit without bracket is the ideal solution if you want to replace your current CR-Touch sensor or if you want to mount this levelling sensor on your own design bracket.

The CR Touch has a metal probe that reduces wear and significantly extends its life. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials by performing a multi-point detection on the printing surface and registering height differences.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after power on.

The CR Touch only works on 3D printers with a 32-bit motherboard such as the Ender-3 Neo, Ender-3 v2, Ender-3 Max, Ender-3 S1, Ender-3 S1 Plus, Ender-3 S1 Pro, CR -10 SmartPro.

Specifications

Brand:	Creality 3D	Our item no:	DAR00941
Dimensions:	39.3 x 27 x 17.5 mm	Weight:	0.05 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this today!

€46.50 (Incl. 23% VAT) (€37.80 Excl. 23% VAT)

In stock

Creality 3D Laser module 1.6W | 24V

Zoom in

Description Open up a world of extra possibilities by converting your 3D printer into a laser engraving machine with the Creality 3D Laser module 1.6W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration, you can use the focus lens and the lever. Gently push this lever down to focus accurately. When you are done focusing, you can lift the lever back up to store it safely.

Other functionalities
You can engrave up to 0.06mm accurately thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm balsa wood plate. In addition, this laser module offers the possibility to work with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engraving and laser cutting, or pause the current action. By using a TF card/MicroSD card, you can also make beautiful creations without connecting the 3D printer to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Brand:	Creality 3D	Our item no:	DAR00961
Power rating:	1,600 mw	Voltage:	24 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€87.50 (coming soon) (Incl. 23% VAT) (€71.14 Excl. 23% VAT)

Creality 3D Laser module 5W | 24V

Zoom in

Description Open a world of extra possibilities by converting your 3D printer into a laser engraving machine with this Creality 3D Laser module 5W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration you can use the focus lens and lever. Gently push this lever down to focus accurately. When you have finished focusing, you can raise the lever again for safe storage.

Other functionalities
You can engrave accurately up to 0.06mm thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm sheet of balsa wood. In addition, this laser module offers the possibility of working with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engrave and cut, or pause the current action. By using a TF card/MicroSD card you can also make beautiful creations without the 3D printer being connected to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Brand:	Creality 3D	Our item no:	DAR00962
Power rating:	5 W	Voltage:	24 v

€149.00 (Incl. 23% VAT) (€121.14 Excl. 23% VAT)

EU warehouse

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Creality

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Creality