Bambu Lab

49 - 72 of 176

Description This Bambu Lab LED Light is an LED bar that can be installed on the inside of the print chamber. This way the print chamber is illuminated even better, allowing you to see better what is happening inside the printer and improving the quality of timelapse videos. This bar comes with a connection cable. This product is only suitable for the X1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01328

€20.50

€16.67 Excl. 23% VAT

EU warehouse

Bambu Lab Left Plastic Panel - P1 Series

Zoom in

Description This Bambu Lab Left Plastic Panel is an original replacement part. Install the panel on the left side of your 3D printer. This product is only suitable for the P1 series of Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01329

€36.50

€29.67 Excl. 23% VAT

EU warehouse

Bambu Lab Mainboard to Screen Flex Cable

Zoom in

Description You can use this Mainboard to Screen Flex Cable from Bambu Lab to connect the motherboard and high resolution screen. The cable transmits SD card data and images between the 3D printer and the screen.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01330

Order now, we can ship this today!

€11.50

€9.35 Excl. 23% VAT

In stock

Bambu Lab MC Board - X1 Series

Zoom in

Description This Bambu Lab MC Board is a control board for your Bambu Lab 3D printer. This board controls all parts of the 3D printer, such as the XYZ axis motors, cooling fans, heated bed and AMS. This product is only suitable for the X1 series of Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01331

€84.50

€68.70 Excl. 23% VAT

EU warehouse

Bambu Lab MC to AP Cable - P1 Series

Zoom in

Description The Bambu Lab MC to AP Cable connects the MC board and AP board of your 3D printer. The cable provides power and data. This product is only suitable for the P1 series of Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01332

€11.95

€9.72 Excl. 23% VAT

EU warehouse

Bambu Lab nozzle wiper (3-pack)

Zoom in

Description The Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw.

When the PP elastic structure undergoes plastic deformation or fracture, the nozzle wiper can be replaced.

When the PTFE tube becomes loose and can be rotated, please tighten the screws to ensure that the PTFE tube cannot be rotated (be careful not to over-tighten it to cause slippage).

If slippage occurs, please replace the nozzle wiper,

Specifications

Brand:

Bambu Lab

Our item no:

DAR01333

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Toolhead Cable

Zoom in

Description This Bambu Lab P1 Series Toolhead Cable connects the main PCB and the MC mainboard. This cable provides power, enables data communication and ensures that your toolhead is working properly. This product is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01334

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Bambu Lab P1P Display Connector Cable

Zoom in

Description You can use the Bambu Lab P1P Display Connector Cable to connect the motherboard and the high-resolution display. The cable transmits SD card data and images between the 3D printer and the display. This product is only suitable for the Bambu Lab P1P.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01335

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Bambu Lab P1P Screen

Zoom in

Description This Bambu Lab P1P Screen has an LCD screen and physical control buttons. The screen can be used to operate your 3D printer. This product is only suitable for the P1P from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01338

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Bambu Lab PTFE tube connector (3-pack)

Zoom in

Description The PTFE Tube Connector is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool head.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01339

Order now, we can ship this today!

€7.50

€6.10 Excl. 23% VAT

In stock

Bambu Lab P1 Series PTFE Coupling

Zoom in

Description This Bambu Lab PTFE coupling is an original replacement part for your Bambu Lab 3D printer. This coupler is located on the back of the 3D printer and is used to attach the PTFE tube. This product is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01340

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Right Plastic Panel

Zoom in

Description This Bambu Lab Right Plastic panel is an original replacement part. Install the panel on the right side of your 3D printer. This product is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01341

€36.50

€29.67 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series stainless steel extruder unit

Zoom in

Description

The stainless steel extruder unit features double gears made of stainless steel, which increases extrusion force and prevents slippage. It is suitable for commonly used 3D printing filaments such as PLA, PETG, TPU, and more.

The extruder unit also includes a sensor that supports filament break detection, helping to prevent print failures and improving overall printing efficiency.

Please keep all the screws from your original extruder unit for replacement.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01344

€59.50

€48.37 Excl. 23% VAT

EU warehouse

Bambu Lab Scraper (3-pack)

Zoom in

Description With the Bambu Lab Scraper you can remove your print from the circuit board in an easy movement. By carefully pulling the sharp side over the plate, the print comes off quickly without damaging the plate. This package contains 3 pieces and is suitable for the X1 and P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01345

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Bambu Lab Silicone Sock for Hotend (3-pack)

Zoom in

Description This Bambu Lab Silicone Sock for your Hotend is ideal to protect your hotend. The sock consists of high quality silicone, which gives it a higher temperature resistance. It offers your nozzle long-term protection against cold air and residual plastic after printing. The sock also provides optimal thermal insulation. This package contains 3 pieces and is suitable for the X1 and P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01346

€12.50 (coming soon)

€10.16 Excl. 23% VAT

Bambu Lab P1 Series TH Board FPC Cable

Zoom in

Description This Bambu Lab TH Board FPC Cable connects the Extruder Connection Board at the front and the TH board at the back to provide power and data. This product is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01347

€13.50

€10.98 Excl. 23% VAT

EU warehouse

Bambu Lab TH Board FPC Cable V9 - X1 Series

Zoom in

Description This Bambu Lab TH Board FPC Cable V9 connects the TH mainboard and the interface board. This product is only suitable for Bambu Lab's X1 series.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01348

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€10.60 (coming soon)

€8.62 Excl. 23% VAT

Bambu Lab P1 Series TH Board

Zoom in

Description This is a TH Board for the P1 series 3D printers from Bambu Lab. This board is the main card of the toolhead and ensures smooth operation of various toolhead parts, including the hotend, extruder and cooling fan. This product is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01349

€52.50

€42.68 Excl. 23% VAT

EU warehouse

Bambu Lab X1 series hotend thermistor (3-pack)

Zoom in

Description The thermistor has highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly only.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01350

€21.50

€17.48 Excl. 23% VAT

EU warehouse

Bambu Lab Toolhead Rear Housing

Zoom in

Description This Bambu Lab Toolhead Back Case is ideal for protecting your toolhead. It should be placed at the back of your toolhead.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01351

€8.50

€6.91 Excl. 23% VAT

EU warehouse

Bambu Lab Toolhead Middle Housing

Zoom in

Description This Bambu Lab Toolhead Middle Housing is ideal for protecting your toolhead. It should be placed around your toolhead.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01352

€14.50

€11.79 Excl. 23% VAT

EU warehouse

Bambu Lab hardened steel extruder gear assembly

Zoom in

Description The hardened steel extruder gear assembly is an internal component of the hardened steel extruder unit. It comprises a driven gear and an active gear that work together to feed filament into the hotend.

Built with heavy-duty materials, the hardened steel extruder gear has a better capability of printing with tough engineering filaments like PAHT-CF and PET-CF for long-lasting performance. If abrasion or clogging occurs due to extended use, users can just replace the extruder gear assembly rather than the whole extruder unit.

The P1 Series Extruder Unit comes with stainless steel extruder gear. Users can upgrade it to hardened steel extruder gear for better abrasion resistance to engineering filaments.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01353

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Bambu Lab replacement filament cutter (3-pack)

Zoom in

Description The filament can be cut to prevent the supplies from clogging when using the Bambu X1 series and P1 series. When used with AMS, it assists with multi-material switching.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01354

Order now, we can ship this today!