Raspberry Pi

USB-C cable with switch for Raspberry Pi 4

Description Control your Raspberry Pi 4 easily with this USB-C cable with switch.

Attach this cable between your Raspberry Pi 4 and your USB-C power supply so that you no longer have to remove or connect the USB-C power cable when starting up and shutting down the Raspberry Pi 4. From now on you can do this easily via the on/off button!

Specifications

Brand:	123-3D	Our item no:	DAR00175
Length:	27 cm

€2.95

€2.40 Excl. 23% VAT

EU warehouse

Raspberry Pi white USB-C power supply (15.3W)

Zoom in

Description This white Raspberry Pi power supply has been specially developed for the Raspberry Pi 4 and features a fixed cable (1.5m) with a USB-C plug. Suitable for European sockets and safe to use due to the many safety measures.

NOTE: Not suitable for older Raspberry Pi models.

Specifications

AWG:	18 awg	Current rating:	3 A
Brand:	Raspberry Pi	Max power:	15 W
Cable length:	150 cm	Output voltage:	5 v/°c
Colour:	white	Our item no:	DAR00171

€14.50

€11.79 Excl. 23% VAT

EU warehouse

Raspberry Pi V2 camera board (8MP)

Zoom in

Description Expand your Raspberry Pi with this high-quality V2 camera board.

This 8 megapixel camera is equipped with a Sony IMX219 image sensor and a fixed focus lens for razor-sharp photos with an image resolution of 3280 x 2464 pixels. In addition, it also supports 1080p (30fps), 720p (60fps) and 640x480p (90fps) videos. Easy to connect on top of the Raspberry Pi via a small 15cm flex cable (included) and ideal for creating surveillance images.

NOTE: We recommend that you upgrade to the latest version of Raspbian.

Specifications

Brand:	Raspberry Pi	Our item no:	DAR00179
Height:	9 mm	Weight:	0.003 kg
Length:	25 mm	Width:	23 mm

Order now, we can ship this today!

€39.50

€32.11 Excl. 23% VAT

In stock

Flex cable for Raspberry Pi camera module, 30cm

Zoom in

Description Do you find the flex cable that comes standard with the camera module for the Raspberry Pi too short? Then you can use this extra long flex cable as a replacement.

Identical to the original and specially designed to connect the camera module to your Raspberry Pi.

Specifications

Brand:	123-3D	Our item no:	DAR00181
Length:	30 cm

Length:

€2.95

€2.40 Excl. 23% VAT

EU warehouse

Flex cable for Raspberry Pi camera module, 50cm

Zoom in

Description Do you find the flex cable that comes standard with the camera module for the Raspberry Pi too short? Then you can use this extra long flex cable as a replacement. Identical to the original and specially designed to connect the camera module to your Raspberry Pi.

Specifications

Brand:	123-3D	Our item no:	DAR00218
Length:	50 cm

Length:

€4.25

€3.46 Excl. 23% VAT

EU warehouse

Black aluminium heatsink case for Raspberry Pi 4

Zoom in

Description Protect your Raspberry Pi 4 and prevent overheating with this Aluminium Heatsink Case!

This case can lower the temperature by 10°C to 15°C even when running at maximum power (100% CPU). In addition, it is easy to install thanks to the included screws and allen key and all entrances remain accessible so that you can get started in no time.

Note: Raspberry Pi not included.

Specifications

Brand:	123-3D	Our item no:	DAR00221
Colour:	black

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.25

(coming soon)

€9.15 Excl. 23% VAT

Wrecklab PrintHat v2

Zoom in

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Brand:

Wrecklab

Our item no:

DAR00354

€104.50

€84.96 Excl. 23% VAT

EU warehouse

Raspberry Pi 5 Active Cooling

Zoom in

Description The Raspberry Pi 5 Active Cooling is ideal when you want to use your board under long-term, heavy loads without a housing. The large metal cooling element and fan are controlled via the fan connector. You attach the active cooling to your Raspberry Pi board via spring pins in two mounting holes.

Please note: This Active Cooling is only suitable for the Raspberry Pi 5

Specifications

Brand:

Raspberry Pi

Our item no:

DAR01235

Order now, we can ship this today!

€9.50

€7.72 Excl. 23% VAT

In stock

Raspberry Pi 5 red and white housing

Zoom in

Description Protect your Raspberry Pi 5 with this easy-to-assemble housing in red and white. The snap-together design means you don't need any tools. The case provides free access to GPIO pins, MicroSD and all important ports. This means you don't have to open it every time.

Active and passive cooling
The internal PWM fan can be connected to the special fan connector on the board for active cooling. For passive cooling there are ventilation openings in the bottom and a narrow opening under the lid. Together, these ensure that your Raspberry Pi 5 remains cool and can continue to perform optimally.

Other functionalities
The new on/off button is easy to operate and has an activity LED. Soft protections on the bottom ensure that your Raspberry Pi 5 can remain on your desk and does not cause any damage to the surface. By using spacers it is possible to stack multiple housings on top of each other.

Specifications

Brand:

Raspberry Pi

Our item no:

DAR01231

€17.50

€14.23 Excl. 23% VAT

EU warehouse

Raspberry Pi 5 black/grey case

Zoom in

Description Protect your Raspberry Pi 5 with this easy-to-assemble case in black and gray. The snap-together design means you don't need any tools. The case provides free access to GPIO pins, MicroSD and all important ports. This means you don't have to open it every time.

Active and passive cooling
The internal PWM fan can be connected to the special fan connector on the board for active cooling. For passive cooling there are ventilation openings in the bottom and a narrow opening under the lid. Together, these ensure that your Raspberry Pi 5 remains cool and can continue to perform optimally.

Other functionalities
The new on/off button is easy to operate and has an activity LED. Soft protections on the bottom ensure that your Raspberry Pi 5 can remain on your desk and does not cause any damage to the surface. By using spacers, it is possible to stack multiple housings on top of each other.

Specifications

Brand:

Raspberry Pi

Our item no:

DAR01232

€17.50

€14.23 Excl. 23% VAT

EU warehouse

Raspberry Pi 5 RTC Battery

Zoom in

Description This rechargeable lithium battery is specially designed to be used in combination with your Raspberry Pi 5. It will power the Real-time clock when the board is disconnected from the mains. It comes with double-sided tape to secure the battery to a housing.

The battery comes with a compatible connector. This can be attached to the special backup battery head, which is located next to the USB-C connector (labeled BAT). When the Raspberry Pi is disconnected from the mains, the RTC will use this battery for power. The moment the board is connected to power, the battery will charge.

Specifications

Brand:

Raspberry Pi

Our item no:

DAR01236

€9.50

€7.72 Excl. 23% VAT

EU warehouse

Micro HDMI to HDMI cable, 1.5m

Zoom in

Description Does your 3D printer have an HDMI connection? Then you can connect your laptop or computer to your 3D printer with this micro HDMI to HDMI adapter cable. The cable has a length of 1.5 meters and supports 3D, Deep Colour, ARC and 4K resolutions up to 3840 x 2160 pixels.

Specifications

AWG:	32 awg	Connector A:	HDMI A male
Brand:	123-3D	Connector B:	Micro HDMI D male
Cable length:	150 cm	Insulation material:	PVC
Colour:	black	Our item no:	DAR00174
Conductor material:	copper	Thread diameter:	5.5 mm

€6.75

€5.49 Excl. 23% VAT

EU warehouse

Micro HDMI to HDMI adapter cable, 20cm

Zoom in

Description Does your 3D printer have an HDMI connection? Then you can connect your laptop or computer to your 3D printer with this micro HDMI to HDMI adapter cable. The cable has a length of 20cm and supports 3D, Deep Colour, ARC and 4K resolutions up to 3840 x 2160 pixels.

Specifications

AWG:	30 awg	Connector A:	HDMI female
Brand:	123-3D	Connector B:	Micro HDMI male
Cable length:	20 cm	Insulation material:	PVC
Colour:	black	Our item no:	DAR00173
Conductor material:	copper	Thread diameter:	4.5 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€7.75

(coming soon)

€6.30 Excl. 23% VAT

Flex cable for Raspberry Pi camera module, 70cm

Zoom in

Description Do you find the flex cable that comes standard with the camera module for the Raspberry Pi too short? Then you can use this extra long flex cable as a replacement. Identical to the original and specially designed to connect the camera module to your Raspberry Pi.

Specifications

Brand:	123-3D	Our item no:	DAR00219
Length:	70 cm

Length:

€4.95

€4.02 Excl. 23% VAT

EU warehouse

Flex cable for Raspberry Pi camera module, 100cm

Zoom in

Description Do you find the flex cable that comes standard with the camera module for the Raspberry Pi too short? Then you can use this extra long flex cable as a replacement. Identical to the original and specially designed to connect the camera module to your Raspberry Pi.

Specifications